PRODUCT BULLETIN: CCK-45/5000, Climatic Test Chamber for VW tests

The quality of the interior components of a vehicle must be maintained facing the extreme environmental conditions. For this reason, all the internal components of a vehicle must be tested under conditions of temperature or temperature and humidity. The standards VW PV 1200 and PV 2005 A realize accelerated stress cycles over the automotive components. One important point of these standards is the limitation of the percentage of water during some parts of the cycles.

The chamber CCK-45/5000 has been designed to comply with both standards, maintaining a precise control of the existing humidity in the ambient. The volume of the chamber allows test several interior components of the vehicles like: door panels, pillars, body sides, etc. The cooling group is placed in the back of the chamber to occupy less space in the laboratory, with a complete doors aperture and giving the total access to the workspace.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers VW Standard CHAMBERS to do these tests.

VIDEO, DYCOMETAL CETM-45/7960, AIRBAG TESTING CHAMBER

Airbags are one of the most important safety elements in automotive industry, so these cars parts must to be tested to guarantee the safe of the drivers and passengers under environmental conditions.

CETM-45/7650 is a compact chamber prepared to explode the airbag inside or outside of the chamber.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers AIRBAG TESTING CHAMBER to do these tests.

PRODUCT BULLETIN: CETM-45/7650, Temperature Airbag Testing Chamber

Airbags are one of the most important safety elements in automotive industry, so these cars parts must to be tested to guarantee the safe of the drivers and passengers under environmental conditions..

CETM-45/7650 is a compact chamber prepared to explode the airbag inside or outside of the chamber.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers AIRBAG TESTING CHAMBER to do these tests.

PRODUCT BULLETIN: CETM-40/6920m, ESS Test Chamber for Electronic Components

The increasing demand of the market of electronic components has generated a more demanding test and control system to reduce warranty costs, as well as ensuring a quality to the end user in a competitive market.

By this reason, one of the points key for checking of it quality, are the environmental tests, between which stand out, the climatic tests, for the verification of the resistance of the electronic systems against the temperature and the humidity.

CETM-40/6920m has been manufactured to comply with the strictest trials. The chamber has been developed to test the electronic components dissipating the maximum energy and with a hard temperature change rate of 5ºC/min, lineally and with load.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Temperature chamber to do these tests.