FORCED AIR HEATING OVEN FOR HIGH TEMPERATURE TESTING. MODEL, AFA-200/1500

In the automotive, aeronautical, aerospace, etc. sectors, the conditioning of large parts under high temperature conditions must be studied. Sometimes, the products are large in size or a high weight is to be tested. It is for this reason that DYCOMETAL has developed large-sized ovens for the conditioning of large parts.

The oven, model AFA-200/1500, has been designed to easily introduce samples with large weights (>200 kg). Its vertical design allows the samples to be comfortably introduced in trolleys with all the samples, with direct access thanks to the interior guides. The equipment has a time/weekly programmer, as well as an Ethernet communication for recording the temperature values during the test.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

EXTERNAL CLIMATIC CONDITIONING UNIT FOR PEELING/TENSILE TESTS. MODEL: CCKg-40/32T

Universal testing machines (UTM) are designed to test the mechanical properties of different materials. The tests performed on them can be diverse, such as: tensile, compression, bending, peeling or tearing.  These climatic tests can be performed under controlled climatic conditions of temperature and humidity.

The CLIMATIC EXTERNAL CONDITIONING UNIT, CCKg-40/32T model, in a system that has been specifically designed to be introduced inside a very limited space of columns where there cannot be a technical area at the back inside the chamber. It is cooled mechanically, without the need for liquid nitrogen.

The system is complemented with a height-adjustable extractor trolley, to facilitate the removal of the chamber in case the chamber is not needed for the test.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

TEMPERATURE CHAMBER FOR ISOTHERMAL PACKAGINGS TESTING. MODEL, CETMB-20/3270T

Maintaining the COLD CHAIN during transport is a crucial element for the design and verification of isothermal packaging for the transport of pharmaceutical products, biological samples, blood banks, etc. The packaging must maintain constant conditions at all times during transport.

The TEMPERATURE TEST CHAMBER, model CETMB-20/3270T, has been designed to test packages or isothermal bags under conditions of temperatures down to -20 ºC, verifying their behaviour. Its volume allows tests to be carried out on packages of different sizes, and its MODUBLOC configuration allows the chamber to be easily moved despite its volume.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers SOLUTIONS IN ENVIRONMENTAL TESTING ADAPTED TO YOUR NEEDS.

STABILITY CLIMATIC TEST CHAMBER FOR PHARMACEUTICAL INDUSTRY. MODEL, CM-0/4954mT

Often, the space for a climatic chamber is limited and our technical department has to analyse and study the options for the installation of a climatic chamber. This is the case of the climatic chamber model CM-0/4954mT.

In this case, the client had very limited space for the installation of the chamber, so we had to analyse the most suitable options to meet the client's requirements and adjust as much as possible to the useful space. The solution was to position a sliding door to reduce the opening space, place the cooling unit on the ceiling and the equipment chiller on the floor below the room, positioning it at a distance of 10 metres. The chamber has a touch screen control (HMI) as well as a recorder in accordance with FDA regulation 21 CFR part 11.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers ENVIRONMENTAL TEST SOLUTIONS. 

TEMPERATURE CHAMBER FOR ELECTRICAL CABLE TESTING. MODEL: CETM-70/1800

One of the elements that can considerably affect an ELECTRICAL CABLE is the cold, affecting the mechanical characteristics of the cable. The different test standards (UNE, IEC, HD, BS, UL, CSA) establish the extreme test conditions to which cables must be subjected, allowing to verify the design and the choice of the most suitable materials for cable manufacturing.  

The temperature test chamber, CETM-70/1800, has been designed to carry out extreme tests up to -65 ºC, taking into account the mass introduced as well as the tool used to elongate or bend the electric cable during the test. Its vertical volume allows to comfortably place and manipulate the samples inside.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com.

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers TEMPERATURE TEST CHAMBERS.