CLIMATE CHAMBER BUILT ACCORDING TO THE CUSTOMER’S NEEDS, MODEL: CCK-40/1000T-6

Climatic chambers can be built according to customer requirements. Inner dimensions, outer dimensions, temperature ranges, humidity conditions, etc. can be changed. One of the most demanded points is the modification of the standard temperature gradients of the equipment, i.e. the cooling and heating speed. All our systems are completely flexible, being able to change any option of the equipment under the advice of our technical team. Such is the case of the chamber that we present below, the CCK-40/1000T-6. This chamber has a gradient of 6 K/min in cooling and 8 K/min in heating, keeping the other conditions unchanged: interior volume, interior dimensions, temperature ranges, etc.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

STRESS SCREENING CHAMBER (15 K/min), FOR ELECTRONICAL COMPONENTS – AIR COOLED. MODEL, CETM-70/1000T-15

High-gradient testing, or ESS, in the development of electronic components serves to detect defective components by "stimulation", not "simulation", by overcoming the expected environmental conditions that the samples will undergo. 

The thermal test chamber model CETM-70/1000T-15, has been configured according to all the customer's needs. With a 10" touch screen control panel, it allows precise control of the temperature parameters. Due to the customer's installation, the chamber had to be air-cooled, with the cooling unit positioned at a distance of 25 metres. It also has an additional 15" control panel with integrated software for powerful analysis in the chamber itself.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

STRESS SCREENING CHAMBER FOR AUTOMOTIVE INDUSTRY. MODEL: CCK-70/1371T-10

Current environmental tests have become increasingly demanding in the temperature gradients to which the part will be subjected. One of the most widely used tests today is the accelerated stress screening (ESS) test, during which the part to be tested is subjected to high cooling or heating gradients that can range from 5 K/min to 15 K/min.

DYCOMETAL in its eagerness to develop new products according to customer specifications, has developed the CLIMATIC CHAMBER, model CCK-70/1371T-1P, with an interior volume according to the space requirements of the customer, as well as a test gradient of 10 K/min.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

TEMPERATURE CHAMBER FOR ELECTRICAL CABLE TESTING. MODEL: CETM-70/1800

One of the elements that can considerably affect an ELECTRICAL CABLE is the cold, affecting the mechanical characteristics of the cable. The different test standards (UNE, IEC, HD, BS, UL, CSA) establish the extreme test conditions to which cables must be subjected, allowing to verify the design and the choice of the most suitable materials for cable manufacturing.  

The temperature test chamber, CETM-70/1800, has been designed to carry out extreme tests up to -65 ºC, taking into account the mass introduced as well as the tool used to elongate or bend the electric cable during the test. Its vertical volume allows to comfortably place and manipulate the samples inside.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com.

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers TEMPERATURE TEST CHAMBERS. 

EXTERNAL CONDITIONING UNIT FOR ELECTRICAL ENGINE TESTING, MODEL: AFA-150/300g

The growing demand for electrical equipment has increased the need for ever more demanding climatic testing to ensure system reliability. The extreme conditions that these parts will face can range from cold winter to the highest desert temperatures.

The external conditioning unit, model AFA-150/300g, was designed to ensure the operation of the electrical machine in extreme positive temperature conditions. The external box was designed to be adapted to the customer's existing test bench in such a way that it could be adapted as much as possible without altering the configuration of the test bench. The test chamber has two replaceable doors so that both the generator and the test stand can be used as a normal system to increase its usefulness.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers EXTERNAL CONDITIONING UNITS FOR ENGINE TESTINGS.

LARGE VOLUME THERMAL SHOCK CHAMBER - 2500 LITRES, MODEL: CRT2H-40/2500

Thermal shock chambers are a fundamental element for the thermal fatigue testing of materials, equipment and automatisms. They are predominantly used in the following industries: aeronautics, automotive, military, electronics, telecommunications, space and, in general, in the materials research industry. The configuration of these chambers is usually vertical, but when the parts have a very large volume, it is necessary to opt for a horizontal design that allows the thermal shock to be carried out from right to left and vice versa.

The CRT2H-40/2500 thermal shock chamber was a great challenge for Dycometal, since few chambers with this volume have been manufactured, nor so demanding. The development of the chamber was carried out by our technical and design department with the customer, designing equipment in accordance with their requirements.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers LARGE VOLUME THERMAL SHOCK CHAMBER.

THERMOSTATIC BATH FOR COMBAT HELMETS TESTING, MODEL: BTE-1080.

All equipment carried by a country's armed forces is subjected to the most stringent environmental testing to ensure maximum safety and protection for the soldier. One of these elements are combat helmets, which must preserve their impact resistance after undergoing a temperature-controlled immersion test in salt water, simulating sea conditions and extreme temperature and ageing conditions.

In order to verify the immersion resistance of the combat helmets, DYCOMETAL has developed the special thermostatic bath BTE-1080e which allows a complete immersion up to 1 metre deep in salt water at a given temperature. The immersion/elevation system is fully automated so that the process is controlled at all times. Its construction has been developed in stainless steel to withstand the conditions of such a demanding test.  

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMOSTATIC WATER BATH FOR COMBAT HELMETS TESTING.

CLIMATIC TEST CHAMBER FOR TESTING POWER ELECTRONICS, MODEL: CCK-40/4357MT

The railway sector is one of the most important transport sectors on the planet for both people and goods, and is a sector with continuous investment in R&D&I with a view to improving the energy efficiency of the systems, increasing performance, reducing weights, etc. The components installed include power electronic equipment such as pulse sources, transducers, light indicators, etc. During the production process, compliance with the needs and requirements must be verified, applying the quality standards and regulations that must be applied. In order to verify correct operation in the most extreme environments, it will be necessary to carry out the necessary tests to guarantee the functionality of the equipment.

Our climatic test chamber CCK-40/4357MT allows testing of large and heavy power electronic equipment, subjecting them to the most extreme temperature conditions according to regulations, as well as performing high temperature and high humidity climatic tests according to customer specifications.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TESTING CHAMBER FOR POWER ELECTRONIC EQUIPMENT TESTS.

TEMPERATURE TEST CHAMBER FOR TESTING ON TRANSMITTING ANTENNAS, MODEL: CETM-40/979MT

Mobile telephony has become one of the essential elements of our daily lives, and it would be unthinkable for us not to have this technology at our disposal one day. This technology is based on the use of transmitting antennas, which have become part of our natural environment and which must be able to withstand the most aggressive environmental conditions: rain, solar radiation, extreme temperatures (desert or polar), etc. To this end, antenna manufacturers must have a laboratory prepared to simulate real environmental conditions, taking into account the energy dissipation that the antennas will generate during operation, thus guaranteeing correct operation 365 days a year.

The temperature test chamber CETM-40/979MT was designed to reach extreme operating temperatures, taking into account the energy dissipation of the transmitting antennas as well as its own mass. Its mobile design allows the chamber to be easily moved and its reduced volume makes it a space-saving chamber in the laboratory. A powerful chamber in a compact package.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL TESTING CHAMBER FOR TESTING MOBILE TELEPHONE ANTENNAS.

WELDED WALK-IN CLIMATIC TEST CHAMBER FOR MECHATRONIC PARTS, MODEL: CCK-40/12936T

Mechatronics is a fundamental pillar for developing manufacturing processes by combining mechanics, electronics, computing and control. This branch of engineering is key to the automotive sector, combining mechanical, electrical, electronic and sensor systems. Within the automotive sector, mechatronics plays a fundamental role in a sector that is constantly trying to develop new and better technologies.  

The CCK-40/12936T chamber has been developed according to the specifications of one of the main customers within the mechatronics sector, so that the different elements can be tested to ensure the comfort, safety and efficiency of the vehicle.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR MECHATRONICS.

CLIMATIC TEST CHAMBER FOR THE STUDY OF PHOTOSENSITIVE SENSORS, MODEL: CCK-40/300T

There are a considerable number of sensors for measuring all kinds of physical or chemical parameters, among which there are some sensors that can be photosensitive, where light can affect their performance. These sensors, as well as those that are not affected by light, must be subjected to climatic and thermal tests, to verify their performance under extreme conditions, but with the proviso that they must be climatic tests without the presence of light. For this purpose, the climatic chamber is built with a blind door, without a window, so that light access to the test chamber is reduced to a minimum. In addition, other parameters are taken into account to avoid possible reflections inside the chamber.

The CCK-40/300T climatic chamber has been modified to reduce the possible entry of light as much as possible, so that the sensors are not affected. It also has the capacity to control the climatic variables necessary to stress the electronic boards and photosensitive sensors.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the Climatic Chamber FOR THE STUDY OF PHOTOSENSITIVE SENSORS.

TEMPERATURE TEST CHAMBER FOR AMMUNITION FIELD TESTS. MODEL, CCK-70/125

Within the quality control of armament ammunition, there are various types of environmental tests: thermal, climatic, solar radiation, corrosion, etc., with thermal tests being one of the most common. During these tests, the parts are subjected to both positive and negative temperatures, and this test has to be carried out both in the laboratory and in real field tests, where the sample is tempered before being used under the indicated conditions. In order to temper the samples, it must be possible to take the chamber to the field.

The thermal test chamber model CETM-70/125 has been developed to maintain a good ergonomics, positioning the control in the upper part of the chamber and the cooling group in the lower part, as well as vibration absorption systems for the transport of the equipment in a comfortable way in a lorry. In addition, the chamber has a temperature range from -70ºC to +150ºC, which allows it to cover all the thermal tests required by customers. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL CHAMBER FOR AMMUNITION TESTING.

SPECIAL CLIMATIC TEST CHAMBER FOR PALEONTOLOGICAL TESTS. MODEL, CCK-25/2340MTe

Taphonomy is the part of palaeontology that studies the processes of fossilisation and the formation of fossil deposits. The aim of a test laboratory is to simulate the environmental conditions to which fossils will be subjected in nature, under controlled and repeatable conditions. This will require a very special chamber that encompasses all types of environmental tests possible in nature and anywhere in the world: temperature control, cryogenics, humidity, rain, carbonation and solar radiation.

The CCK-25/2340MTe chamber model was created with this premise in mind, the control of multiple variables existing in nature, within a medium volume and vertical chamber, in order to simulate the conditions to which the fossils will be subjected in real life. The equipment has several environmental simulation options that can be controlled both individually and as a whole, depending on the combination.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL, a company with more than 35 years of experience in the development of chambers for the simulation of environmental tests, offers its customers SPECIAL SYSTEMS DESIGNED IN ACCORDANCE WITH CUSTOMER SPECIFICATIONS.

CLIMATIC TEST CHAMBER FOR DRIVING MIRRORS, MODEL: CCK-40/588e

A vehicle’s driving mirrors can range in size from the smallest in a utility vehicle to the new larger mirrors in a van or truck. Moreover, their vertical geometry makes it difficult for them to fit into a vehicle position in a conventional climatic chamber. If we add to this the fact that laboratories have limited space for the chambers, then the design has to be well thought out.

The CCK-40/588e test chamber has been developed to meet all customer requirements: tight budget, limited space and a wide range of sample sizes. A model that meets the most stringent automotive standards and fits the space available for the chamber in the laboratory. 

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CUSTOM MADE CLIMATIC TEST CHAMBERS. 

EXTERNAL CONDITIONING SYSTEM FOR THE AERONAUTICAL SECTOR, MODEL: CCK-60/1000g

Within the aerospace industry there are a large number of parts of different sizes and with different performances, from the smallest microchip in on-board electronics to the curing of a composite, which often makes it difficult to choose a single unit that can cover all possible tests and sample sizes.

The CCK-60/1000g external conditioning unit or generator, was designed with the customer to cover a wide range of possibilities: from the testing of a small sample in a 1 m3 test box to the possibility of being connected to large curing rooms or test benches. Its cooling unit allows to condition even 9 m3 rooms, and it is designed to guarantee high temperature and high humidity tests, or dry environments. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the EXTERNAL CONDITIONING UNIT.  

CLIMATIC TEST CHAMBER FOR GARDEN MACHINERY. MODEL: CCK-25/12085M.

The vast majority of the common elements that surround us are tested in climatic environments to verify the quality, durability and behaviour over time under the climatic conditions that they have to withstand throughout their useful life. One of these common elements are lawn mowers, which are tested under low and high temperature and humidity conditions to verify their resistance to atmospheric agents.

The climatic test chamber CCK-25/12085M has been designed to accommodate both small mowers and larger machines where one person can sit. Its large volume allows several machines to be tested in parallel or individually. The MODUBLOC configuration allows the movement of the chamber and easy installation.   

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS to perform such tests.

CLIMATIC TEST CHAMBER FOR DEFENSE SECTOR. MODEL: CCK-75/2000 2P NG.

Among the different sectors that use environmental testing equipment, one of the most demanding in terms of testing and safety is the Defense sector, where any component to be used in the field must be tested under the most extreme conditions of temperature and humidity.

The CCK-75/2000 2P NG climatic test chamber is prepared to house both large, heavy parts and numerous small samples to carry out the most demanding tests, both at low and high temperatures or under humid conditions. The CCK-75/2000 2P NG, being a standard design, has been prepared with added safety features, according to the requirements of this important sector. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS to perform such tests. 

CLIMATIC TEST CHAMBER COMBINED WITH HYDRAULIC TEST BENCH , MODEL: CCK-40/3600e 2P

In a vehicle there are different components that suffer wear due to the continuous movement to which they are subjected over time. This type of components must be tested in the quality laboratory beforehand for a certain number of hours, so that its correct operation can be guaranteed throughout its useful life. In addition, they must be subjected to the changes in temperature and humidity that they will suffer, so the piece and the test bench must be introduced into a climatic chamber that simulates the temperature and humidity conditions.

The CCK-40/3600e 2P chamber has been designed in accordance with customer specifications to be able to introduce the different elements of the hydraulic test bench through the front wall, to simulate temperature and humidity conditions. The different front access-ports allow the actuators to pass, and the double door on the sides allows greater ergonomics of access to each element inside the chamber.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Climatic test chamber combined with hydraulic test bench.

PRODUCT BULLETIN: CCK-45/10000/10 NG, High Gradient Chamber without LN2 (ESS)

The current environmental testing, increasingly have become more demanding in the gradients of temperature that will be submitted the piece. One of the most commonly used tests is currently the trial of accelerated stress or Stress Screening (ESS), during which the part to be tested is subjected to high gradients of cooling or warming. These gradients will submit the samples to high degrees of stress, so that you can check if there is any type of defect in them thus ensuring the quality of the piece and thus avoiding returns during the warranty period.

CCK-45/1000/10 NG has been developed under the guidance of the client, where has been taken into account the more stylized design of CCK NG chambers. The dimensions of the chamber have suitable measures of the space that the customer had, and the control has been placed according to its guidelines on one side, with different accessories such as control flow of air speed or contacts free of potential to be able to generate events. The chamber presents also an access-port on the door that allows the loading of equipment without having to disconnect them by introducing them to the interior.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

 DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Stress Screening Climatic chamber.

BUILDING. Freeze- thaw chamber

Building materials installed outdoors, must endure for years strong climate action: rain, ice, sun, wind, etc. In winter, they continue to experience large temperature changes in the day / night cycle, moisture absorption during the day and freezing at night, causing significant degradation of the material.

With freeze-thaw chambers, manufacturers of building materials can optimize their products in the laboratory, and as a result can be minimized or eliminated the damage.

Standards like: UNE-EN ISO 10545, UNE 67048, UNE 22174, etc. Are used in these elements.

CHD. Freeze-Thaw chamber with thermostatic bath

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers FREEZE-THAW CHAMBERS  to carry out such tests.