CETM-0/100T-UV, thermal test chamber for accelerated aging tests with UV LED light

Exposure to UV light is responsible for various molecular and genetic changes in both materials and living cells. Sunlight reaching the Earth contains UV rays with different wavelengths: UV-A, UV-B, and UV-C, although the latter are blocked by the ozone layer.

Accelerated aging tests with UV LEDs are used in various markets, such as the pharmaceutical, cosmetic, photonics, and medical industries, to simulate an accelerated solar emission spectrum. This allows for the evaluation of the behavior and response of different types of materials to solar radiation.

Our CETM-0/100T-UV chamber has been designed and adapted to perform UV radiation tests in a thermally controlled environment for most UV applications: bonding, polymerization, drying, curing, and photolithography. The system features a 100-liter capacity test chamber made of polished stainless steel with an internal finish. The roof of the test chamber has an opening with a filter to allow for the placement of an external UV radiation source. All of this is controlled by a touchscreen control system and recording and control software.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

SOLAR SIMULATION CHAMBER FOR AGING TESTS ON BUILDING MATERIALS, CL-294

 Solar radiation is one of the main degradation factors for different materials exposed to sunlight. An accelerated ageing test using solar simulation will allow the durability of construction materials or raw materials, etc. to be assessed. This type of accelerated tests can control the energy radiated on a surface, as well as the temperature, allowing to simulate the climatic conditions that will degrade the materials outdoors and to verify that there is no non-conformity in the product.

Our CL-294 chamber has been designed to be able to carry out solar simulation tests under controlled temperature environments. Its interior dimensions of 600 x 700 x 700 mm have been studied to have a certain area of irradiation on a reinforced tray. In addition, its reflective interior improves the interior irradiation conditions. The solar simulation system consists of a powerful lamp positioned above the test chamber at a certain height to guarantee irradiation. The temperature is controlled by an advanced microprocessor to guarantee specific environmental conditions.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

SOLAR SIMULATION CHAMBER FOR AGING TESTS ON BUILDING MATERIALS, CL-294

Solar radiation is one of the main degradation factors for different materials exposed to sunlight. An accelerated ageing test using solar simulation will allow the durability of construction materials or raw materials, etc. to be assessed. This type of accelerated tests can control the energy radiated on a surface, as well as the temperature, allowing to simulate the climatic conditions that will degrade the materials outdoors and to verify that there is no non-conformity in the product.

Our CL-294 chamber has been designed to be able to carry out solar simulation tests under controlled temperature environments. Its interior dimensions of 600 x 700 x 700 mm have been studied to have a certain area of irradiation on a reinforced tray. In addition, its reflective interior improves the interior irradiation conditions. The solar simulation system consists of a powerful lamp positioned above the test chamber at a certain height to guarantee irradiation. The temperature is controlled by an advanced microprocessor to guarantee specific environmental conditions.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

WELDED WALK-IN CLIMATIC TEST CHAMBER FOR MECHATRONIC PARTS, MODEL: CCK-40/12936T

Mechatronics is a fundamental pillar for developing manufacturing processes by combining mechanics, electronics, computing and control. This branch of engineering is key to the automotive sector, combining mechanical, electrical, electronic and sensor systems. Within the automotive sector, mechatronics plays a fundamental role in a sector that is constantly trying to develop new and better technologies.  

The CCK-40/12936T chamber has been developed according to the specifications of one of the main customers within the mechatronics sector, so that the different elements can be tested to ensure the comfort, safety and efficiency of the vehicle.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR MECHATRONICS.

FORCED AIR HEATING OVEN FOR FIELD TESTING OF AMMUNITION, MODEL: AFA-100/150e

Ammunition testing in the defence market is based on strict quality controls, subjecting the ammunition to extreme conditions of temperature, humidity or solar radiation both in the laboratory and in the field, where they have to demonstrate their resistance to the most extreme weather conditions. It is in the field, where real firing tests will be carried out after having been subjected to these extreme conditions.

The oven model AFA-100/150e has been specially designed to carry out both laboratory and field tests. The oven has been designed to be transported in a test truck, being able to condition the samples during transport and in the field by means of a generator set. Its horizontal design allows easy access to the samples in an ergonomic way and its reduced size allows the equipment to be placed in a small truck for easy transport.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the FORCED AIR HEATING OVEN FOR DEFENSE TESTING.

PRODUCT BULLETIN: CCK-0/10725Mf, MODUBLOC PLANT GROWTH CHAMBER

Within the biotechnology sector, climatic chambers have an important application for different applications: arabidopsis, growth of plants, germination of seeds, etc. These chambers present conditions of control of humidity, temperature and solar radiation, as well as the availability of another type of atmospheres. Chambers for plant growth are those that can be used for the cultivation of plants under strictly controlled environmental conditions (temperature, humidity and light). The growth of plants in the Chambers will minimize the impact of environmental variables, reducing the incidence of contamination by pests or disease-causing agents, and allows ideal conditions for the growth of plants in the phase of experimentation.

The CCK-0/10725Mf is a MODUBLOC model, built on a structure that allows the mobility of the chamber, so that it can be easily moved within the same installations or to other installations, and can easily be installed again without the need to disassemble the panels. The chamber is ready for any type of light thanks to its cold set calculated for certain energy dissipation and its humidification system without heat input.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Plant Growth Test Chambers to do these tests.

Aging accelerated in plastic parts: RADIATION

Currently, plastic parts make up most of the things that surround us: cars, computers, etc. These pieces have been of different quality controls, non-metallic materials. There are many types of plastic, but a difference among them is the time of degradation to which they are subject from its manufacture.

One of the factors affecting the degradation is the solar radiation: ultraviolet (UV), visible and infrared (IR); still it UV which most affects the molecular structure of the plastic, accelerating the process of degradation. UV light, accelerated aging chambers allow the simulation of the conditions that the plastic will face during its life, at a certain temperature and under conditions of UV radiation.

More information at: www.dycometal.com 

CCK-40/300 - CLIMATIC CHAMBER WITH SOLAR SIMULATION (300 Liters)

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Chambers to carry out climatic tests

BIOTECHNOLOGY. Plants Growth Chambers

In the R&D market, the climatic chamber has an important application inside of the botanic sector, thanks to the Plants Growth Chambers and seeds germination chamber.

These chambers present the optimal conditions in humidity, temperature and solar radiation, to generate the optimal atmosphere for the growing of the plants. It’s possible to control other variables like gases (CO2, CO, etc).

The dimensions of the chamber can change from the smaller laboratory until the walk-in chambers, where is possible to do extensive cultives.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers PLANTS GROWTH CHAMBERS AND SEEDS GERMINATION CHAMBERS  to carry out such tests.

PHARMACEUTICAL. Light Degradation test chamber

The Pharmaceutical market has developed a test to control the quality of the product against exposure to the light, photo-stability. This kind of test is done inside of chamber with photo-lighting system with different kind of radiations.

The function of this chamber is study the product deterioration , exposed during a specific time to a white-light and near UV light.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers PHOTOSTABILITY CHAMBER - FOTOPANEL to carry out such tests.