LASER-BASED MEASUREMENT OF CONCRETE UNDER STABLE TEMPERATURE CONDITIONS: HIGH-STABILITY OVEN (MODEL AFA-75/1972Te)

 A prominent technological center specializing in geology and construction materials approached us, seeking a solution that would allow them to measure concrete specimens using laser technology while the samples were maintained under highly stable temperature conditions.

Their requirements included:
👉 A custom-designed interior.
👉 A temperature range of up to +75 ºC.
👉 A viewing/measurement system on both sides of the unit, equipped with insulated covers for use when measurements are not being taken.
👉 Reinforced, rail-mounted trays to facilitate the easy loading and unloading of samples.

OUR SOLUTION: The AFA-75/1972Te forced-air circulation oven—a high-stability unit with internal dimensions of 1700 x 800 x 1450 mm (H x W x D), designed specifically for the client. The unit features highly transparent glass panels on both sides—comprising 20 windows in total—which allow for the measurement of the concrete during testing. The entire system is managed via a 7-inch color touchscreen interface, supported by dedicated data-logging and control software, with an optional Webviewer feature for remote operation from various devices.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

HOW WELL DOES YOUR BIKE STAND UP TO SALT AND CORROSION? SALT SPRAY CHAMBER, SSC- SERIES

 A bike can look great on the showroom floor, but what happens after months of rain, road salt and daily use?

Corrosion can affect frames, screws, bolts, welds and other metal components. And when it comes to e-bikes, there are even more parts worth paying attention to.

That’s where salt spray testing comes in.

Using a salt spray chamber, manufacturers can expose materials and coated components to a controlled corrosive environment and check how well they resist corrosion. It’s a practical way to compare coatings, spot weaknesses and improve product durability before the bike reaches the customer.

Of course, passing a salt spray test doesn’t guarantee years of real-world performance. But it does provide valuable information during product development and quality control.
Because a good bike isn’t just about how it rides. It’s also about how well it holds up over time.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

THERMAL TESTING OF ELECTRIC AND HYBRID POWERTRAINS. HIGH-GRADIENT OVEN, AFA-200/2535T

Our client, a prototype manufacturer in the automotive industry, contacted us to supply a testing system for electric and hybrid powertrains, based on a specific set of requirements.

The requested specifications included:
👉 Custom interior design.
👉 Ease of loading for heavy test samples.
👉 Temperature range up to +200 ºC.
👉 High, programmable thermal heating gradients.
👉 Alarm management and notification system.

OUR SOLUTION: The AFA-200/2535T—a custom-designed model with an internal capacity of 2,535 liters. It features an insulated interior equipped with rails to accommodate carts carrying heavy test samples. The unit offers a temperature range of up to +200 ºC, programmable heating gradients of 6 K/min, and an air-extraction cooling system. The entire system is operated via a 10” touchscreen interface, with an Ethernet port for remote control, alarm management, and programming through dedicated software.

Would you like to more know? 

📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

SALT SPRAY CORROSION TESTING FOR AMMUNITION. SALT SPRAY CHAMBER, SSC-1000 NG

Our client contacted us with a need to test a large number of 60 mm projectiles to evaluate how the samples perform when exposed to corrosion. Furthermore, they required additional safety systems to minimize any potential risks.

The specific requirements were:
👉 1000-liter capacity.
👉 Reinforced floor.
👉 Additional safety features.
👉 Specialized angled supports.

OUR SOLUTION: Our standard salt spray chamber, the DYCOMETAL SSC-1000NG. With a 1,000-liter usable capacity, it can accommodate up to 30 angled 60 mm projectiles, thanks to supports custom-designed for this project. The system also incorporates extra safety measures to prevent any risks that might arise inside the chamber. Everything is controlled via a PLC with a touchscreen interface, which displays test profiles and allows for data export to facilitate the creation of test reports.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

A NEW CLIMATIC TEST CHAMBER FOR THE DEFENSE SECTOR (AECTP/MIL-STD). CCK-70/1000T CLIMATIC CHAMBER

A DYCOMETAL client—who already uses several of our chambers across their various facilities—required a new climatic testing system to condition samples in accordance with MIL-STD and AECTP standards. They once again turned to us to provide this new solution.

The requirements were as follows:
👉 1000-liter capacity
👉 Temperature range from -70 ºC to +150 ºC
👉 Relative humidity control
👉 System designed for compliance with AECTP and MIL-STD 810 standards
👉 Reinforced shelving and floor

OUR SOLUTION: The CCK-70/1000T standard climatic test chamber—a model that has been validated on numerous occasions and is highly regarded by our clients. The unit features an internal volume of 920 x 1000 x 1100 mm (H x W x D), accommodating both small and large samples. It is equipped with a touchscreen-based control system, including a status light that indicates when the chamber is in operation. Furthermore, the system can be managed remotely via an Ethernet port, with the option for remote control through a Webviewer interface.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

THERMAL TESTING OF ENGINE INTAKE MANIFOLDS: CETM-50/3200e TEMPERATURE TEST CHAMBER

 A major engineering firm sought to integrate a thermal testing system to evaluate material fatigue, structural integrity, and gasket performance under conditions of accelerated thermal aging for engine intake manifolds. Intake manifolds—whether made of plastic or metal—are subjected to extreme conditions under the hood, including thermal cycling, rapid temperature fluctuations, pressure changes, and vibration. A failure in the material or a breach in the seal can lead to performance loss, air/fuel leaks, or even serious engine damage. Validating their performance prior to mass production is a critical and essential step.

The requirements specified were:
👉 Large internal volume.
👉 Ergonomic design.
👉 A test range of -40 ºC to +130 ºC.
👉 Temperature change rates (gradients) of 2 K/min for both cooling and heating, accounting for the thermal mass and heat dissipation of three aluminum test samples.
👉 Additional safety features for a glycol-based system.

OUR SOLUTION: The DYCOMETAL CETM-50/3200e-2P thermal test chamber. This model is specifically designed to accommodate three samples in parallel, utilizing three reinforced shelves. Its internal dimensions—1000 x 1600 x 2000 mm (H x W x D)—allow for ergonomic positioning of the samples, with ample space for external system connections routed through four 150 mm access ports. The entire process is managed via an advanced controller and its associated software.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

DID YOU KNOW THAT SPORTSWEAR IS TESTED IN CLIMATIC CHAMBERS? CLIMATIC CHAMBER: CCK-40/21430mT

 Our client—a manufacturer of high-performance apparel and accessories—sought a climatic system to verify the behavior of materials during both manufacturing and actual use. They needed to guarantee and validate the clothing's performance under the most demanding conditions, ranging from the humid heat of tropical regions to the dry heat of the desert.

The required specifications were:
- Sufficient volume to accommodate equipment and two people exercising
- Temperature range of -40ºC to +50ºC
- Relative humidity control
- Airflow velocity control
- Multiple observation windows

OUR SOLUTION: The CCK-40/21430mT modular chamber, specifically designed to fit the client's available space. With a volume of 21,430 liters, the chamber accommodated two stationary bikes and two athletes, allowing for performance testing across a temperature range of -40ºC to +50ºC and humidity levels ranging from dry conditions to tropical environments (near 90% RH). The chamber featured high-clarity observation windows to enable video recording of the interior. The entire system was managed via an advanced control system and dedicated software.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

OKTOBERFEST IS HERE, BUT... DID YOU KNOW THAT BEER ALSO UNDERGOES ITS OWN ENVIRONMENTAL QUALITY CONTROL TESTS?

 It’s true; beers undergo specific environmental tests to check their resistance to oxidation and aging reactions triggered by rising temperatures. Radiation is used to assess hop degradation and verify the glass's ability to filter out light radiation. These tests involve "forced aging"—known as accelerated stability testing—which recreates, in just a few days, the harshest real-world conditions the product might face during distribution and retail.

Typical system specifications include:
👉 High load capacity.
👉 Temperature range up to +40ºC.
👉 Irradiation system.
👉 Food-grade stainless steel construction.
👉 Multiple shelves.

OUR SOLUTION: The AFA-30/1000e refrigerated chamber, designed specifically for accelerated testing by beer manufacturers. This high-capacity system features six height-adjustable stainless steel shelves, allowing for flexible positioning based on sample size. Stable and uniform temperature control (up to +40ºC) is maintained throughout the test duration, while a rear-mounted lighting system enables degradation testing. The entire system is managed via a user-friendly controller.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

CLIMATIC TESTING FOR CEREAL RESEARCH: CMMB-0/950T CLIMATIC CHAMBER

 A technology center specializing in cereal research contacted us to request a climatic chamber for studies covering everything from milling to end-use applications—such as bread, pastries, cookies, plant-based beverages, and more—under controlled temperature and humidity conditions.

The required specifications were:
👉 Large internal capacity.
👉 Temperature range of 0°C to +80°C.
👉 Relative humidity control.
👉 Rapid recovery after door closure.
👉 Control and data logging software.

OUR SOLUTION: The CMMB-0/950T climatic test chamber. This new design by DYCOMETAL features a vertical configuration to optimize laboratory space and offers a compact footprint. It provides a temperature range of 0°C to +80°C and humidity control from 10% to 90%. The unit is operated via a 7-inch touchscreen with an Ethernet port and dedicated control software, and includes the new WEBVIEWER system for remote control from any device.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

WHAT IF WE NEED TO TEST SMALL AEROSPACE COMPONENTS? THE CETM-70/48T THERMAL TEST CHAMBER.

 While aircraft are massive vehicles, not all their constituent parts are large; many are small yet still require the same thermal and climatic testing as larger components.
In this instance, our client—a manufacturer of pneumatic aerospace components—needed a thermal test system to conduct thermal resistance tests. They required a small-volume unit, given the compact size of the samples.

The specifications they sought were:
👉 Small volume.
👉 Ergonomic design.
👉 Temperature range: -70°C to +150°C.
👉 Observation window.
👉 Remote control.

OUR SOLUTION: The CETM-70/48T thermal test chamber. It is our smallest model by volume, yet it offers the same temperature ranges as our larger models. It features an ergonomic design, with controls positioned at a comfortable height for any user and a test zone that is ergonomically arranged despite the compact test chamber dimensions (400 x 400 x 300 mm; 48 liters). Additionally, the system features an HMI-based control interface with remote control and data logging software, as well as a WEBVIEWER function that allows the chamber to be controlled remotely from any electronic device..
Would you like to more know? 

📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

CLIMATIC TESTING FOR BALLISTIC PERFORMANCE OF BALLISTIC VESTS. CCK-20/1000T CLIMATIC CHAMBER

 A client wanted to evaluate the ballistic performance of bulletproof vests over time according to NIJ Standard-0101.06. To do this, they planned to acquire a Tumbler drum unit to combine with a climatic chamber that met the climatic and environmental requirements for the various testing procedures for flexible (soft) and rigid (hard) armor.

The required conditions were:
👉 Adequate interior volume to accommodate the Tumbler drum.
👉 Reinforced floor to support the weight of the Tumbler drum.
👉 Compliance with the environmental conditions specified in NIJ Standard-0101.06.
👉 Extended temperature range for conditioning rigid armor (ballistic plates), Phase 2 cold cycle.
👉 Communication capability with the external drum control system.

OUR SOLUTION: The CCK-20/1000T climate test chamber, adapted in its internal dimensions to the drum's dimensions. The chamber features a front opening of over 180º, allowing access to the test area. Its extended range allows for testing both flexible armor and rigid shielding (phase 1 and phase 2 cold cycle). The system includes an Ethernet port as well as communication signals with the customer's remote control system for the Tumbler drum. All of this is controlled by the advanced control system based on a 7” touchscreen panel.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

HOW TO TEST EXTERNAL THERMAL INSULATION SYSTEMS (ETICS)? CCK-25/6800T CLIMATIC CHAMBER

 Our client, a renowned Spanish Certification Center for construction materials, already had several pieces of equipment for performing validation and certification tests on External Thermal Insulation Systems (ETICS). However, due to the workload of the existing equipment, they needed an additional system to increase their validation capacity.

The requirements they were looking for were:
👉 Compliance with European guidelines EAD 040083-00-0404.
👉 Equipment identical to the previously supplied systems.
👉 Ability to test two samples in parallel.
👉 Enclosures for both sides of the chamber for when the chamber is only evaluating one sample or for use as a conventional climatic chamber.

OUR SOLUTION: Our climatic test chamber, model CCK-25/6800T, features a standardized design compliant with European guidelines EAD 040083-00-0404. With an internal volume of 6800 liters, it can test two thermal insulation systems in parallel. The system includes a thermostatically controlled bath to condition the water to the specified temperature and then recirculate it. All of this is controlled by our advanced system, which features a 7” touchscreen panel and associated logging software for PC-based control and recording.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

THERMAL SHOCK TESTING OF VEHICLE ACCESS COMPONENTS. CRT2V-40/166T THERMAL SHOCK CHAMBER

 Every vehicle must withstand extreme temperature conditions, from the coldest mornings with sub-zero temperatures to the hottest parts of the day. In this case, our client, a manufacturer of advanced vehicle access, security, and control systems, was looking for a thermal shock chamber for their quality control testing.

The required specifications were:
👉 Medium-sized interior volume.
👉 Thermal shock from -40°C to +200°C.
👉 Compliance with IEC standards.
👉 Compact size.

OUR SOLUTION: Our CRT2V-40/166T thermal shock chamber. In this case, we reduced the camera height using a basket transfer system different from the traditional pneumatic piston system, which allowed us to significantly lower the overall height. The system performed exceptionally well under thermal shock, operating from -40°C to +200°C. All of this was controlled via our advanced 7” touchscreen control system and associated software.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

Are you looking for maximum homogeneity and precision in your extreme temperature tests? ❄️

At DYCOMETAL, backed by over 40 years of experience leading the design and manufacture of environmental simulation equipment in Spain, we understand that the reliability of your thermal tests cannot depend on compromises. That's why today we want to highlight one of our most robust and in-demand solutions: our Forced Air Circulation Chests.
What makes our chests stand out in the demanding industrial quality control sector?

• Flexible and precise temperature ranges: We design and manufacture equipment tailored to your specifications with standard ranges of -20ºC, -30ºC, or -70ºC, also offering optimized configurations to consistently reach -45ºC.

• Innovation and sustainability with CO₂: We develop advanced solutions based on CO₂ as an alternative refrigerant, ensuring maximum commitment to the environment and anticipating the strictest European environmental regulations.
• Exceptional homogeneity: Thanks to the forced air circulation system, we guarantee a highly uniform temperature distribution throughout the entire usable volume of the chest, minimizing thermal gradients during testing.
• Custom engineering: Our engineering department studies each project individually to manufacture the exact solution required by the regulations or testing standards of your sector.
• All our equipment is developed entirely at our plant in Viladecans (Barcelona), under the standards of the ISO 9001:2015 certified quality management system and is verified by our own LCIS calibration laboratory.

Do you want to optimize your testing processes with cutting-edge technology and specialized technical support?

Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

CLIMATIC TESTING FOR DERMATOLOGICAL STUDIES. CLIMATIC CHAMBER CM-10/695T

A leading global pharmaceutical company focused on medical dermatology contacted us to request a climate chamber for stability testing. The project, initially straightforward, had a unique challenge: the installation space was difficult to access.

The requirements were:

👉 Custom design to facilitate equipment access.
👉 Temperature and humidity control.
👉 Demineralized water reserve tank.
 
👉 4 reinforced trays.
👉 Independent communication with their data logging system.

 

OUR SOLUTION: The CCK-10/695T climatic testing chamber. We redesigned this climatic chamber both internally and externally to allow access to the installation area without compromising the chamber's usable volume. The airflow system was redesigned, placing the technical components on the side of the chamber instead of the rear, without sacrificing usable volume. A vertical space was added for storing tall samples. The interior dimensions are 1240 x 585 x 960 mm (H x W x D). It features a security lock to prevent tampering and a 7” touchscreen control system with data transmission to your recording system.

 

Would you like to more know?

📩 Contact: comercial@dycometal.com

🌐 Web: www.dycometal.com

WHEN YOU NEED A CLIMATE CHAMBER FOR LARGE-VOLUME STABILITY TESTING WITHOUT COMPROMISING MOBILITY. CCKMB-0/10500

A major European university was looking for a large-volume stability testing chamber capable of testing two pallets of packaged pharmaceutical products with a total weight of up to two tons. The pallets could reach a height of 1800 mm, necessitating a large chamber. However, the client also required a mobile system that would allow them to relocate the chamber as needed.

 

The required specifications were:

👉 Testing capacity for two European pallets

👉 Transportable design
👉 Capacity to condition up to 2,000 kg of samples.
 👉 Temperature control from +5°C to +60°C
👉 Relative humidity control with dew points from 2.7°C to +45°C.
👉 Reinforced structure to support over 2,000 kg.

 
OUR SOLUTION: A MODUBLOC climate chamber, CCKMB-0/10500. A modular, mobile chamber thanks to its base structure. The interior dimensions of 2300 x 3000 x 1520 mm (H x W x D) allow for the storage of two full pallets, with a reinforced, high-support floor. A double-leaf door provides full access to the testing area. All of this is controlled by an advanced control system compliant with ICH guidelines.
 

Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

TEMPERATURE TEST CHAMBER COMBINED WITH TEST BENCH FOR AUTOMOTIVE COMPONENTS. TEMPERATURE TEST CHAMBER, MODEL: CETM-60/2700T-2P

Our client, a leading European engineering firm, wanted to combine their test benches with a thermal testing system (hot/cold) to subject parts to both mechanical and thermal stress, thus verifying their behavior under extreme conditions.

 
The requirements were:
👉 Custom interior design.
👉 Temperature range between -60°C and +180°C.
👉 Various side, ceiling, and floor accesss-ports for integration with the test bench.
👉 Thermal gradients designed to compensate for large masses.
👉 Large viewing windows.
👉 Ability to communicate with their own control system.
 
OUR SOLUTION: Our thermal testing chamber, model CETM-70/2700T-2P. A system with an internal volume of 1500 x 1500 x 1200 mm (H x W x D), with all the technical components located on the right side of the chamber, allowing for seamless integration into the client's test bench. A total of 9 access-ports are distributed along the left side of the test chamber, as well as in the ceiling, floor, and rear. All of this is managed by our 10” touchscreen control system, which can also communicate with the client's existing system.

 

Would you like to more know?

📩 Contact: comercial@dycometal.com

🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #temperature #humidity #chamber #testing #climatic #RAndD #Innovation #QualityAssurance #automotive #testbench

CLIMATIC TESTS FOR ENVIRONMENTAL STUDIES OF AUTOMOTIVE LIGHTING. CLIMATE CHAMBER CCK-70/2197T-6

Once again, our client, a renowned manufacturer of automotive lighting systems, contacted us to supply a new climate test chamber. But this time, they needed something more specialized: a cubic design that would allow them to place a model with the lighting installed in vehicle position for climate testing.

The requirements were:
👉 Custom interior design.
👉 Temperature range between -70°C and +150°C.
👉 Relative humidity control.
👉 Cooling and heating gradients of 6 K/min.
👉 Reinforced structure.
👉 Large, highly transparent glass.

OUR SOLUTION: A climate test chamber with a space tailored to the client's needs. A system designed with a cubic interior volume of 1300 x 1300 x 1300 mm (H x W x D). With a temperature range from -70°C to +150°C, heating and cooling rates of 6 K/min, and relative humidity control between 10% and 98%, this unit features two access-ports, mechanical locks with security keys, a reinforced floor, reinforced trays, exterior lighting, and a large, highly transparent glass panel. And of course, our signature blue totem with a large status light houses our advanced control system.

Would you like to more know?

📩 Contact: comercial@dycometal.com

🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #temperature #humidity #chamber #testing #climatic #RAndD #Innovation #QualityAssurance #Automotive 

HOW ARE VEHICLE LIGHTING FIXTURES TESTED UNDER EXTREME CONDITIONS? CCK-70/1000T-6 CLIMATE CHAMBER

An automotive lighting manufacturer with more than five DYCOMETAL environmental test chambers in its quality control laboratory needed additional equipment similar to what it already had installed.
 
The required conditions were:
👉 Temperature range between -50°C and +180°C.
👉 Standard volume of 1000 liters.
👉 Cooling temperature gradients of 6 K/min.
👉 Heating temperature gradients of 8 K/min.
👉 Reinforced floor and reinforced trays. 

OUR SOLUTION: The climate test chamber previously supplied to this client, the CCK-70/1000T-6, has been updated with a new totem display with an operating status light and a new mechanical locking system with a security key. The client has already tested and verified the system's performance and results. This high-performance heating and cooling unit allows for the most demanding climate tests to be performed on vehicle lighting.
 
Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #lighting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #Auomotive #temperature #humidity #chamber #testing #climatic #RAndD #Innovation #QualityAssurance