CLIMATIC TESTING FOR BALLISTIC PERFORMANCE OF BALLISTIC VESTS. CCK-20/1000T CLIMATIC CHAMBER

 A client wanted to evaluate the ballistic performance of bulletproof vests over time according to NIJ Standard-0101.06. To do this, they planned to acquire a Tumbler drum unit to combine with a climatic chamber that met the climatic and environmental requirements for the various testing procedures for flexible (soft) and rigid (hard) armor.

The required conditions were:
👉 Adequate interior volume to accommodate the Tumbler drum.
👉 Reinforced floor to support the weight of the Tumbler drum.
👉 Compliance with the environmental conditions specified in NIJ Standard-0101.06.
👉 Extended temperature range for conditioning rigid armor (ballistic plates), Phase 2 cold cycle.
👉 Communication capability with the external drum control system.

OUR SOLUTION: The CCK-20/1000T climate test chamber, adapted in its internal dimensions to the drum's dimensions. The chamber features a front opening of over 180º, allowing access to the test area. Its extended range allows for testing both flexible armor and rigid shielding (phase 1 and phase 2 cold cycle). The system includes an Ethernet port as well as communication signals with the customer's remote control system for the Tumbler drum. All of this is controlled by the advanced control system based on a 7” touchscreen panel.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

HOW TO TEST EXTERNAL THERMAL INSULATION SYSTEMS (ETICS)? CCK-25/6800T CLIMATIC CHAMBER

 Our client, a renowned Spanish Certification Center for construction materials, already had several pieces of equipment for performing validation and certification tests on External Thermal Insulation Systems (ETICS). However, due to the workload of the existing equipment, they needed an additional system to increase their validation capacity.

The requirements they were looking for were:
👉 Compliance with European guidelines EAD 040083-00-0404.
👉 Equipment identical to the previously supplied systems.
👉 Ability to test two samples in parallel.
👉 Enclosures for both sides of the chamber for when the chamber is only evaluating one sample or for use as a conventional climatic chamber.

OUR SOLUTION: Our climatic test chamber, model CCK-25/6800T, features a standardized design compliant with European guidelines EAD 040083-00-0404. With an internal volume of 6800 liters, it can test two thermal insulation systems in parallel. The system includes a thermostatically controlled bath to condition the water to the specified temperature and then recirculate it. All of this is controlled by our advanced system, which features a 7” touchscreen panel and associated logging software for PC-based control and recording.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

THERMAL SHOCK TESTING OF VEHICLE ACCESS COMPONENTS. CRT2V-40/166T THERMAL SHOCK CHAMBER

 Every vehicle must withstand extreme temperature conditions, from the coldest mornings with sub-zero temperatures to the hottest parts of the day. In this case, our client, a manufacturer of advanced vehicle access, security, and control systems, was looking for a thermal shock chamber for their quality control testing.

The required specifications were:
👉 Medium-sized interior volume.
👉 Thermal shock from -40°C to +200°C.
👉 Compliance with IEC standards.
👉 Compact size.

OUR SOLUTION: Our CRT2V-40/166T thermal shock chamber. In this case, we reduced the camera height using a basket transfer system different from the traditional pneumatic piston system, which allowed us to significantly lower the overall height. The system performed exceptionally well under thermal shock, operating from -40°C to +200°C. All of this was controlled via our advanced 7” touchscreen control system and associated software.

Would you like to more know? 
📩 Contact: comercial@dycometal.com 
🌐 Web: www.dycometal.com

Are you looking for maximum homogeneity and precision in your extreme temperature tests? ❄️

At DYCOMETAL, backed by over 40 years of experience leading the design and manufacture of environmental simulation equipment in Spain, we understand that the reliability of your thermal tests cannot depend on compromises. That's why today we want to highlight one of our most robust and in-demand solutions: our Forced Air Circulation Chests.
What makes our chests stand out in the demanding industrial quality control sector?

• Flexible and precise temperature ranges: We design and manufacture equipment tailored to your specifications with standard ranges of -20ºC, -30ºC, or -70ºC, also offering optimized configurations to consistently reach -45ºC.

• Innovation and sustainability with CO₂: We develop advanced solutions based on CO₂ as an alternative refrigerant, ensuring maximum commitment to the environment and anticipating the strictest European environmental regulations.
• Exceptional homogeneity: Thanks to the forced air circulation system, we guarantee a highly uniform temperature distribution throughout the entire usable volume of the chest, minimizing thermal gradients during testing.
• Custom engineering: Our engineering department studies each project individually to manufacture the exact solution required by the regulations or testing standards of your sector.
• All our equipment is developed entirely at our plant in Viladecans (Barcelona), under the standards of the ISO 9001:2015 certified quality management system and is verified by our own LCIS calibration laboratory.

Do you want to optimize your testing processes with cutting-edge technology and specialized technical support?

Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

CLIMATIC TESTING FOR DERMATOLOGICAL STUDIES. CLIMATIC CHAMBER CM-10/695T

A leading global pharmaceutical company focused on medical dermatology contacted us to request a climate chamber for stability testing. The project, initially straightforward, had a unique challenge: the installation space was difficult to access.

The requirements were:

👉 Custom design to facilitate equipment access.
👉 Temperature and humidity control.
👉 Demineralized water reserve tank.
 
👉 4 reinforced trays.
👉 Independent communication with their data logging system.

 

OUR SOLUTION: The CCK-10/695T climatic testing chamber. We redesigned this climatic chamber both internally and externally to allow access to the installation area without compromising the chamber's usable volume. The airflow system was redesigned, placing the technical components on the side of the chamber instead of the rear, without sacrificing usable volume. A vertical space was added for storing tall samples. The interior dimensions are 1240 x 585 x 960 mm (H x W x D). It features a security lock to prevent tampering and a 7” touchscreen control system with data transmission to your recording system.

 

Would you like to more know?

📩 Contact: comercial@dycometal.com

🌐 Web: www.dycometal.com

WHEN YOU NEED A CLIMATE CHAMBER FOR LARGE-VOLUME STABILITY TESTING WITHOUT COMPROMISING MOBILITY. CCKMB-0/10500

A major European university was looking for a large-volume stability testing chamber capable of testing two pallets of packaged pharmaceutical products with a total weight of up to two tons. The pallets could reach a height of 1800 mm, necessitating a large chamber. However, the client also required a mobile system that would allow them to relocate the chamber as needed.

 

The required specifications were:

👉 Testing capacity for two European pallets

👉 Transportable design
👉 Capacity to condition up to 2,000 kg of samples.
 👉 Temperature control from +5°C to +60°C
👉 Relative humidity control with dew points from 2.7°C to +45°C.
👉 Reinforced structure to support over 2,000 kg.

 
OUR SOLUTION: A MODUBLOC climate chamber, CCKMB-0/10500. A modular, mobile chamber thanks to its base structure. The interior dimensions of 2300 x 3000 x 1520 mm (H x W x D) allow for the storage of two full pallets, with a reinforced, high-support floor. A double-leaf door provides full access to the testing area. All of this is controlled by an advanced control system compliant with ICH guidelines.
 

Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

TEMPERATURE TEST CHAMBER COMBINED WITH TEST BENCH FOR AUTOMOTIVE COMPONENTS. TEMPERATURE TEST CHAMBER, MODEL: CETM-60/2700T-2P

Our client, a leading European engineering firm, wanted to combine their test benches with a thermal testing system (hot/cold) to subject parts to both mechanical and thermal stress, thus verifying their behavior under extreme conditions.

 
The requirements were:
👉 Custom interior design.
👉 Temperature range between -60°C and +180°C.
👉 Various side, ceiling, and floor accesss-ports for integration with the test bench.
👉 Thermal gradients designed to compensate for large masses.
👉 Large viewing windows.
👉 Ability to communicate with their own control system.
 
OUR SOLUTION: Our thermal testing chamber, model CETM-70/2700T-2P. A system with an internal volume of 1500 x 1500 x 1200 mm (H x W x D), with all the technical components located on the right side of the chamber, allowing for seamless integration into the client's test bench. A total of 9 access-ports are distributed along the left side of the test chamber, as well as in the ceiling, floor, and rear. All of this is managed by our 10” touchscreen control system, which can also communicate with the client's existing system.

 

Would you like to more know?

📩 Contact: comercial@dycometal.com

🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #temperature #humidity #chamber #testing #climatic #RAndD #Innovation #QualityAssurance #automotive #testbench

CLIMATIC TESTS FOR ENVIRONMENTAL STUDIES OF AUTOMOTIVE LIGHTING. CLIMATE CHAMBER CCK-70/2197T-6

Once again, our client, a renowned manufacturer of automotive lighting systems, contacted us to supply a new climate test chamber. But this time, they needed something more specialized: a cubic design that would allow them to place a model with the lighting installed in vehicle position for climate testing.

The requirements were:
👉 Custom interior design.
👉 Temperature range between -70°C and +150°C.
👉 Relative humidity control.
👉 Cooling and heating gradients of 6 K/min.
👉 Reinforced structure.
👉 Large, highly transparent glass.

OUR SOLUTION: A climate test chamber with a space tailored to the client's needs. A system designed with a cubic interior volume of 1300 x 1300 x 1300 mm (H x W x D). With a temperature range from -70°C to +150°C, heating and cooling rates of 6 K/min, and relative humidity control between 10% and 98%, this unit features two access-ports, mechanical locks with security keys, a reinforced floor, reinforced trays, exterior lighting, and a large, highly transparent glass panel. And of course, our signature blue totem with a large status light houses our advanced control system.

Would you like to more know?

📩 Contact: comercial@dycometal.com

🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #temperature #humidity #chamber #testing #climatic #RAndD #Innovation #QualityAssurance #Automotive 

HOW ARE VEHICLE LIGHTING FIXTURES TESTED UNDER EXTREME CONDITIONS? CCK-70/1000T-6 CLIMATE CHAMBER

An automotive lighting manufacturer with more than five DYCOMETAL environmental test chambers in its quality control laboratory needed additional equipment similar to what it already had installed.
 
The required conditions were:
👉 Temperature range between -50°C and +180°C.
👉 Standard volume of 1000 liters.
👉 Cooling temperature gradients of 6 K/min.
👉 Heating temperature gradients of 8 K/min.
👉 Reinforced floor and reinforced trays. 

OUR SOLUTION: The climate test chamber previously supplied to this client, the CCK-70/1000T-6, has been updated with a new totem display with an operating status light and a new mechanical locking system with a security key. The client has already tested and verified the system's performance and results. This high-performance heating and cooling unit allows for the most demanding climate tests to be performed on vehicle lighting.
 
Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #lighting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #Auomotive #temperature #humidity #chamber #testing #climatic #RAndD #Innovation #QualityAssurance

HOW DO WE TEMPER HYDROGEN PIPES IN A TENSILE TESTING MACHINE?

THERMAL TEST CHAMBER: CETM-70-156Te.
Our client, a leading manufacturer of piping for the fluid transport sector, wanted to temper hydrogen pipes during tensile testing to evaluate the behavior of the samples under both the forces they endured and at extreme temperatures. For this, they needed a chamber capable of reaching extreme temperatures and perfectly compatible with their existing tensile testing machine.

The required specifications were:
👉 Chamber adapted to their existing tensile testing machine.
👉 Temperature ranges from -70 ºC to +100 ºC.
👉 Mechanical cooling.
👉 Chamber mobility to allow for testing with and without the chamber.
👉 Easy chamber movement.
👉 Side window for recording material behavior during testing.
 
OUR SOLUTION: Our CETM-70/156Te thermal testing chamber is adapted to the customer's existing tensile testing machine and features a chamber extraction system for testing with or without thermal conditioning. It includes a large, highly transparent front and side viewing window. Removable top and bottom ports allow for chamber removal without loosening clamps. All controls are managed via a touchscreen and remote control software, which can be connected to the customer's tensile testing system.
 
Would you like to more know?
📩 Contacto: comercial@dycometal.com
🌐 Web: www.dycometal.com 

#dycometal #environmentaltesting #EnvironmentalSimulation #Tensiletesting #Tesnsilemachine #ThermalTesting #hydrogen #temperature #chamber #testing #RAndD #Innovation #QualityAssurance

HOW TO TEST CERAMIC TILES AGAINST TEMPERATURE CHANGES? AIR-WATER THERMAL SHOCK CHAMBER, CRT2V-300T

 A technology center contacted us because they needed to test ceramic tiles against sudden temperature changes according to the UNE-EN ISO 10545-9 standard, for sample validation, certification, and the development of new materials.

 Their requirements were:
👉 Compliance with EN ISO 10545-9.
👉 Capacity for large samples (650 x 650 mm).
👉 Precise control of all cycle variables.
👉 Remote PC connection.

OUR SOLUTION: Our air-water thermal shock chamber, CRT2VT-300T, a thermal shock chamber with a usable capacity of 300 liters. The system comprises two zones: a positive temperature compartment with a temperature range up to +170°C and a thermostatically controlled bath for sample immersion at +15°C, with a cooling system to chill the water and ensure maximum stability and homogeneity throughout the bath. All of this is controlled by an advanced processor for managing cycles, times, segments, transfer times, and residence times. It also includes associated software for recording all tests and generating test reports.

 Would you like to more know?
📩 Contacto: comercial@dycometal.com
🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #Thermalshock #aritowater #ThermalTesting #buildingmaterial #temperature #humidity #chamber #testing #shock #RAndD #Innovation #QualityAssurance #certification

🌡️ DOES YOUR PRODUCT WITHSTAND REAL-WORLD STRESS? THE THERMAL SHOCK CHALLENGE.

In a global market where reliability is the minimum standard, thermal stress testing is no longer optional. At DYCOMETAL, we have spent over 40 years designing solutions to push materials to their limits, ensuring safety before they ever reach the market.  

Our range of Thermal Shock Chambers (CRT2V) enables extreme temperature transitions in seconds, simulating aggressive conditions in a controlled and precise manner. 

What sets us apart?
·        In-house Engineering: We design and manufacture every component at our plant in Viladecans. 
·        Testing Versatility: Vertical and horizontal models, including air-to-water systems, to comply with the most demanding international standards. 
·        Commitment to Quality: All our equipment is verified in our own LCIS calibration laboratory, under ISO 9001:2015 standards. 

We don't just manufacture chambers; we are your strategic partner in quality control.

 Would you like to more know? 
📩 Contacto: comercial@dycometal.com
🌐 Web: www.dycometal.com

  #Dycometal #EnvironmentalSimulation #QualityControl #ReliabilityEngineering #ThermalShock #TestingTechnology #AutomotiveEngineering #AerospaceTesting #MaterialsScience #ISO9001

THERMAL TESTING FOR OPTICAL MEASUREMENTS UNDER CONTROLLED TEMPERATURE CONDITIONS.

THERMAL TEST CHAMBER: CETM-70/125T
A client in the electronics sector was looking for a thermal test chamber for the characterization of materials and devices with optical properties (sensors, coatings, fibers, etc.). These elements are affected by environmental conditions.
 
Key points to consider:
👉 Variation of optical properties (transmittance, reflectance, refractive index) with temperature.
👉 Potential measurement errors due to thermal gradients or condensation on optical windows.
👉 Integration of optical instrumentation (sources, detectors, fibers) in a controlled environment without disturbing the sample.
👉 Need for reproducibility in thermal cycles (heating/cooling).
👉 Isolation from vibrations and external disturbances that could affect the optical signal.
 
Our client, in the electronics sector, needed a powerful temperature control system to evaluate how environmental conditions affect device behavior in order to analyze different technical parameters under controlled temperature conditions.
 
OUR SOLUTION: CETM-70/125T. A thermal testing chamber adapted to perform these tests, taking into account the client's needs. It features through-hole systems to support anti-vibration systems. The chamber has high-quality optical windows: one on the front and another located in the ceiling for conducting optical studies. It includes a system to prevent condensation on samples. A cryogenic nitrogen system allows for reaching extreme temperatures below +100°C. All of this is achieved while controlling the temperature of the sample.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

HOW TO PROPERLY TEST PAINT DRYING UNDER CONTROLLED CONDITIONS? CCK-25/125T CLIMATIC CHAMBER

 A client in the paint industry encountered a problem:
👉 They needed to validate a drying time recording system.
👉 But they lacked a controlled environment to guarantee reliable results.
 
The challenge wasn't just introducing the equipment…
It was ensuring:
• adequate airflow
• stable temperature and humidity conditions
• sufficient space for the system and the samples
 
OUR SOLUTION: the CCK-25/125T. A compact unit with an interior space of 500 x 500 x 500 mm provided ample room for both the recorder and small samples. It offered a testing temperature range of -25°C to +150°C and climate control between 10% and 95% RH, parameters that met the client's requirements. The standard two trays increased the load capacity for both samples. Furthermore, its small external dimensions allowed it to fit perfectly within the available laboratory space. All of this was managed by our advanced control system, based on a touchscreen and remote PC control software.
Our solutions are tailored to our clients.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-25/680Tf, TEMPERATURE TEST CHAMBER WITH PHOTOPERIOD FOR STUDIES OF THE EFFECTS OF CLIMATE CHANGE ON WILD SPECIES.

In the current climate emergency, understanding the adaptive capacity of wild species is not only a scientific challenge, but a global priority. Rising average temperatures and the increased frequency of extreme weather events are disrupting biological cycles, distribution ranges, and interactions between species. At DYCOMETAL, we support the scientific community in developing turnkey solutions that transform theoretical data into observable realities. Because to protect our biodiversity, we must first understand it.

Our DYCOMETAL CETM-25/680Tf thermal testing chamber is designed for extreme temperature ranges from -25°C to +70°C, allowing for the simulation of varying temperature conditions and adjustable light intensity depending on the time of year (from 10% to 100%). Its vertical design allows for positioning plants according to their growth stage, close to the lights in their initial growth phase and gradually moving them further away as they mature. All of this is controlled via a touchscreen and associated software, using environmentally friendly gas compliant with European fluorinated gas (F-Gas) regulations.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-40/99225mT, WALK-IN THERMAL TEST CHAMBER FOR THE RAILWAY INDUSTRY

Climate Simulation: Ensuring Reliability in Rail Transport. The railway industry demands the highest standards of quality and reliability. Every component must function perfectly under the most adverse conditions. Environmental testing is essential to ensure that these systems meet passenger safety requirements, as safety components must operate at extreme temperatures, from -40°C to +60°C.

The DYCOMETAL CETM-40/99225mT thermal test chamber has been designed to test large and heavy components thanks to its more than 99 m³ of usable capacity. Due to the size and weight of the samples to be tested, the chamber design includes an easily opened, single-leaf sliding door for convenient sample loading. Operating temperatures range from -40°C to +70°C, allowing samples to be subjected to the most extreme temperature environments. The system also includes our modern totem unit, which integrates the control panel and a large status light for enhanced visibility.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-30/440T, TEMPERATURE TEST CHAMBER FOR MOTOR TESTING.

At DYCOMETAL, we understand that testing critical components like motors requires more than just a standard chamber. It requires engineering that understands thermal dynamics and operational ergonomics for conducting studies on protection, safety, and sample optimization.

The DYCOMETAL CETM-30/440T temperature test chamber has been designed for the validation of electric motors. With a horizontal, double-door design, it allows validation technicians easy and convenient access to the entire chamber. Loading the chamber is user-friendly, allowing samples to be placed on the supplied shelves. The window in the door allows for proper viewing during the process, and once the chamber is closed, the easy-to-use control is ergonomically positioned, allowing the test to begin immediately. All of this is controlled by external control and recording software.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCKg-0/112, CLIMATE GENERATOR FOR TEMPERATURE AND HUMIDITY CONDITIONING IN OPTICS

At DYCOMETAL, we develop environmental test chambers designed to guarantee maximum reliability in sectors where precision is paramount, such as optics and vision care. 👁️🔬 Our solutions allow for environmental testing of ophthalmic lenses and advanced vision care products, recreating controlled temperature, humidity, and accelerated aging conditions. This makes it possible to evaluate the resistance of treatments, the stability of materials, and the durability of coatings. Thanks to these tests, manufacturers can ensure that their products will maintain clarity, performance, and quality even after long periods of use.

Like our external climate conditioning system, DYCOMETAL CCKg-0/112. An external conditioning unit with temperature and humidity control. A flexible system that allows for the conditioning of different independent test chambers depending on the type and size of samples. In this case, our client did not request a special drawer, painted in matte black due to the optical peculiarities of the samples to be tested.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CV INDUSTRIAL ULTRA-FREEZERS FOR BATTERY TESTING AT NEGATIVE TEMPERATURES

Ultra-low temperature testing allows for the validation of battery performance even under the most extreme operating conditions, analyzing their charge and discharge capacity, stability, efficiency, and safety, even in environments where performance is typically compromised. These tests enable the anticipation of failures, optimize design, and ensure that each battery responds reliably, autonomously, and safely, even when the temperature drops to the limit.

DYCOMETAL's CV series industrial ultra-freezers can reach temperatures as low as -75°C. Their vertical design allows for the placement of small or large sample sizes, thanks to reinforced shelves and a floor. Furthermore, the freezer can be adapted to any safety level to minimize risks. Its flexible configuration allows for redesigning the standard system in terms of interior dimensions according to the customer's needs.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

ACR-40/660, CHEST FREEZER FOR VEHICLE BATTERIES TESTING

Freezing tests allow for the reproduction of negative temperatures, verifying the behavior, safety, and performance of batteries under intense cold conditions. This enables the evaluation of critical aspects such as starting capacity, material stability, and system reliability in harsh climates. These thermal tests can be carried out in an industrial forced-air chest freezer, such as those manufactured by DYCOMETAL, designed to reproduce extreme negative temperature conditions.

Like our DYCOMETAL ACR-40/660 chest freezer, with a temperature range down to -40ºC for a weight of 700 kg. Its reinforced floor allows for ergonomic battery placement, and its chest configuration accommodates both small and large batteries. Its simple control allows you to ensure the temperature and its additional recorder system allows you to record 4 temperature probes in addition to the equipment's own control probe in order to analyze the data in the associated software.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.