LARGE VOLUME THERMAL SHOCK CHAMBER - 2500 LITRES, MODEL: CRT2H-40/2500

Thermal shock chambers are a fundamental element for the thermal fatigue testing of materials, equipment and automatisms. They are predominantly used in the following industries: aeronautics, automotive, military, electronics, telecommunications, space and, in general, in the materials research industry. The configuration of these chambers is usually vertical, but when the parts have a very large volume, it is necessary to opt for a horizontal design that allows the thermal shock to be carried out from right to left and vice versa.

The CRT2H-40/2500 thermal shock chamber was a great challenge for Dycometal, since few chambers with this volume have been manufactured, nor so demanding. The development of the chamber was carried out by our technical and design department with the customer, designing equipment in accordance with their requirements.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers LARGE VOLUME THERMAL SHOCK CHAMBER.

THERMOSTATIC BATH FOR COMBAT HELMETS TESTING, MODEL: BTE-1080.

All equipment carried by a country's armed forces is subjected to the most stringent environmental testing to ensure maximum safety and protection for the soldier. One of these elements are combat helmets, which must preserve their impact resistance after undergoing a temperature-controlled immersion test in salt water, simulating sea conditions and extreme temperature and ageing conditions.

In order to verify the immersion resistance of the combat helmets, DYCOMETAL has developed the special thermostatic bath BTE-1080e which allows a complete immersion up to 1 metre deep in salt water at a given temperature. The immersion/elevation system is fully automated so that the process is controlled at all times. Its construction has been developed in stainless steel to withstand the conditions of such a demanding test.  

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMOSTATIC WATER BATH FOR COMBAT HELMETS TESTING.

CLIMATIC TEST CHAMBER FOR TESTING POWER ELECTRONICS, MODEL: CCK-40/4357MT

The railway sector is one of the most important transport sectors on the planet for both people and goods, and is a sector with continuous investment in R&D&I with a view to improving the energy efficiency of the systems, increasing performance, reducing weights, etc. The components installed include power electronic equipment such as pulse sources, transducers, light indicators, etc. During the production process, compliance with the needs and requirements must be verified, applying the quality standards and regulations that must be applied. In order to verify correct operation in the most extreme environments, it will be necessary to carry out the necessary tests to guarantee the functionality of the equipment.

Our climatic test chamber CCK-40/4357MT allows testing of large and heavy power electronic equipment, subjecting them to the most extreme temperature conditions according to regulations, as well as performing high temperature and high humidity climatic tests according to customer specifications.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TESTING CHAMBER FOR POWER ELECTRONIC EQUIPMENT TESTS.