CYCLICAL CORROSION TEST CHAMBER FOR VDA 233-102, SSCK-400

One of the most demanding standards in the field of cyclic corrosion is VDA 233-102, which has 3 different test cycles (A, B and C). This standard has the peculiarity of having to perform a freezing cycle at -15 ºC, a demanding condition for a standard cyclic corrosion tester.   

The cyclic corrosion chamber model SSCK-400 has a cooling unit integrated in the equipment itself, which provides the highest stabilities and uniformities. Likewise, the equipment is manufactured with other added advantages such as: washing of the walls, humidostatic test, etc.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

EXTERNAL CONDITIONING UNIT FOR ELECTRICAL ENGINE TESTING, MODEL: AFA-150/300g

The growing demand for electrical equipment has increased the need for ever more demanding climatic testing to ensure system reliability. The extreme conditions that these parts will face can range from cold winter to the highest desert temperatures.

The external conditioning unit, model AFA-150/300g, was designed to ensure the operation of the electrical machine in extreme positive temperature conditions. The external box was designed to be adapted to the customer's existing test bench in such a way that it could be adapted as much as possible without altering the configuration of the test bench. The test chamber has two replaceable doors so that both the generator and the test stand can be used as a normal system to increase its usefulness.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers EXTERNAL CONDITIONING UNITS FOR ENGINE TESTINGS.

LARGE VOLUME THERMAL SHOCK CHAMBER - 2500 LITRES, MODEL: CRT2H-40/2500

Thermal shock chambers are a fundamental element for the thermal fatigue testing of materials, equipment and automatisms. They are predominantly used in the following industries: aeronautics, automotive, military, electronics, telecommunications, space and, in general, in the materials research industry. The configuration of these chambers is usually vertical, but when the parts have a very large volume, it is necessary to opt for a horizontal design that allows the thermal shock to be carried out from right to left and vice versa.

The CRT2H-40/2500 thermal shock chamber was a great challenge for Dycometal, since few chambers with this volume have been manufactured, nor so demanding. The development of the chamber was carried out by our technical and design department with the customer, designing equipment in accordance with their requirements.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers LARGE VOLUME THERMAL SHOCK CHAMBER.

WALK-IN Salt Spray Chamber

One of the most important destructive agents of the nature is the corrosion, being one of the principals causes of economic lose.

All the markets: automotive, aeronautical, railway, paints or any type of metal treatment industry, have corrosion test simulation inside their quality standards. Sometimes, the samples to be tested are too big, so they need solutions with bigger volumes. In this case, we use the Walk-in Salt Spray Chambers.

The Salt Spray Corrosion Test consists of an accelerated corrosion attack by an artificial salt spray of a certain composition, in the exact conditions of temperature and pressure. To do this type of tests, it uses the salt spray chambers.

Standards like: ASTM B117, DIN 50 021 or DIN 50 017, establish a test parameters to simulate the most aggressive atmospheres.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers WALK-IN Salt Spray Chambers to carry out such tests.

ASTM B117, Neutral Salt Spray Test NSS

ASTM B117 is used to test the corrosion resistance of metallic parts with or without coating; exposing the sample saline atmospheres and high temperature

The samples are introduced into the chamber with an acid atmosphere, pH between 6’5 to 7’2, and temperature of 35ºC. The collection rate must to be between a to 2 ml/hour. The collector will have a surface of 80 cm²  

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-SS, Neutral salt Spray Test

The DIN 50 021-SS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline acid saline atmospheres and high temperature

The samples are introduced into the chamber with an acid atmosphere, pH between 6’5 to 7’2, and temperature of 35ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 2 ml/hour. The collector will have a surface of 80 cm²

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-ESS, Acid Salt Spray Test

The DIN 50 021-ESS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline acid saline atmospheres and high temperature.

The samples are introduced into the chamber with an acid atmosphere, pH between 3’1 to 3’3, and temperature of 35ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 2 ml/hour. The collector will have a surface of 80 cm²  .

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-CASS Copper-Acetic Salt Spray Test

The DIN 50 021-CASS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline copper-acetic saline atmospheres and high temperature.

The samples are introduced into the chamber with an acid atmosphere, ph between 3’1 to 3’3, and temperature of 50ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 1 to 2 ml/hour.   

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 017 - KK; Humidostatic test.

The DIN 50 017 standard is used to analyze the protective coating of the samples.

The sample will be tested in a heated and sutured atmosphere (temperature must be +40ºC) and relative humidity of 100%. This conditions will be constant in all the duration of the test.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic Chambers to carry out such tests.

DIN 50 017- KFW; Humidostatic test

The DIN 50 017 standard is used to analyze the protective coating of the samples.

The sample will be tested, in two cyclical parts; first cycle of 8 hours in heated, sutured air and water vapor, temperature will be +40ºC and relative humidity of 100%. The second cycle has 16 hours, in a temperature of +18 to 28ºC, while relative humidity must to be less than 100%.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic Chambers to carry out such tests.

DIN 50 017 – KTW, Humidostatic test

The DIN 50 017 standard is used to analyze the protective coating of the samples.

The humidostatic chamber has different option to configure the different conditions of the test.

The sample will be tested, in two cyclical parts; first cycle of 8 hours in heated, sutured air and water vapor, temperature will be +40ºC and relative humidity of 100%. The second cycle has 16 hours, in a temperature of +18 to 28ºC, while relative humidity must to be 100%.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic Chambers to carry out such tests.

Kesternich Test Chamber

The DIN 50 018 standard give conditions for Kesternich Corrosion test. This test has been done to simulate industrial or urban atmosphere, by means of the formation of an artificial atmosphere, adding to the air Sulphurous Anhydrid, with or without carbon dioxide.

With the Kesternich’s Test we can get an artificial atmosphere with the best approximation to the results obtained when in sulphurous natural atmospheres some metals are expounded to it.

The Kesternich Test consists of a cycle of 24 hours slit in two parts: the first one consists of 8 hours with closed chamber and the pieces in its indoor, situated according to the Regulations and expounded to 40ºC inside of which 0,2 or 2 liters/ gr. of Sulphurous Anhydrid are introduced with a 100% of RH.

After this period of time, another stage of 16 hours goes on. In this stage the door is open, the heating is stopped and the pieces are exposed to the Ambiance Temperature of the air (according to SFW variant of the DIN 50.017/ 50.018). The test finishes when an inadmissible influence appears in the aspect of the expounded pieces or when the accorded number of cycles for the Test's duration has been reached.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Kesternich test chambers to carry out such tests.

Cyclical Corrosion Test Chamber

The cyclical corrosion test chambers, allow the realization of environmental tests, combined different techniques: salt spray chamber, condensation and dried with temperature/humidity control. These chambers are programmed in order to alternate the test in any sequence or to reproduce automatically.

This type of test is used commonly in the industries: automotive, aeronautical, paints, etc.

The most common standards are: CCT-1, CCT-2, CCT-4, ECC-1, D17 2028, GM9540P, ISO11997-1, ISO14993, JASO M 609, etc.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers cyclical corrosion test chambers to carry out such tests

Salt Spray Chamber

One of the most important destructive agents of the nature is the corrosion, being one of the principals causes of economic lose.

All the markets: automotive, aeronautical, railway, paints or any type of metal treatment industry, have corrosion test simulation inside their quality standards.

The Salt Spray Corrosion Test consists of an accelerated corrosion attack by an artificial salt spray of a certain composition, in the exact conditions of temperature and pressure. To do this type of tests, it uses the salt spray chambers.

Standards like: ASTM B117, ISO 9227, DIN 50 021, JIS Z 2371, etc, give a test parameters to simulate the most aggressive atmosphere.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers salt spray chambers to carry out such tests.