Dycometal CH-300 Chamber for Water Condensation Testing (ISO 6270-2) 🔬💧

 Continuous humidity is one of the most aggressive factors for coatings and surface finishes. Predicting how water condensation will affect paint adhesion or blistering is vital before launching any component to market.

Our CH-300 chamber is specifically designed and manufactured to perform humidity resistance tests under the stringent ISO 6270-2 standard:
👉 Constant condensation atmospheres: Continuous maintenance of 100% humidity by heating the water at the bottom of the chamber.
👉 Durable construction: Manufactured with materials of high thermal and chemical resistance to guarantee maximum equipment durability and test repeatability.

The CH-300 provides the controlled and standardized environment that paint and surface treatment laboratories need to certify the highest quality.

🔗 Discover the technical specifications of our corrosion range at: www.dycometal.com

#Corrosion #HumidityTests #ISO6270 #PaintsAndCoatings #QualityControl #CH300 #Dycometal

SSC-2000 NG, SALT SPRAY CHAMBER. CORROSION TESTS FOR DEFENCE INDUSTRY

A reference standard within the environmental tests applied in defence is MIL STD-810, which is a guide on the different environmental tests necessary to apply depending on the type of sample. And within this standard, there is a section referring to corrosion tests in a saline atmosphere. This type of test is carried out in chambers known as salt spray chambers. The samples to be tested can be large batches or large sizes. Our model SSC-2000 NG is the ideal model when a large working space is required.

The SSC-2000 NG has an actual volumetric capacity of 2000 litres, with internal dimensions of 1000 x 2000 x 1000 (H x W x D), with a reinforced floor capable of supporting large batches of samples or heavy samples. The equipment is supplied with support bars to place or hang the samples and a floor protection against impacts. Control is via a colour touch screen with data logging and export capability.

A large volume for a large number of samples.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CORROSION CHAMBER, ISO 6270-2

Within corrosion testing, there are different types of tests: salt spray, condensation, sulphurous atmosphere or cyclic corrosion. One of the main standards for condensation tests is ISO 6270-2, applied for paints and varnishes. This standard establishes 3 types of test conditions (CH, AHT and AT). Our model CH-300, allows to comply with the standard in all its test methods. In addition, it can be customised to have a register and automatic door opening.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

KESTERNICH CORROSION TEST CHAMBERS

The DIN 50 018 standard establishes the conditions for the Kesternich Corrosion Test. This test is designed to simulate industrial or urban atmospheres by forming an artificial atmosphere by adding sulphur dioxide to the air, with or without carbon dioxide. With the Kesternich Test an artificial atmosphere is obtained with the maximum approximation to the results obtained when metals are exposed in natural sulphurous atmospheres.

From DYCOMETAL we offer our standard designs as well as modified designs according to the customer’s needs to comply with this corrosion standard.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CLIMATIC TEST CHAMBER FOR NEW COMPOSITE MATERIALS, CCK-0/125T

The industrial sector is continuously researching to create lighter, more efficient and sustainable solutions for mobility. Sectors such as aerospace, automotive, railway, are looking to lighten weights in order to reduce consumption and CO2 footprint, which is why composite materials play a crucial role in new materials. These elements have the advantage of being light, resistant and sustainable, but research, development and validation of the materials are necessary to guarantee the quality and performance of these new materials through tests and analyses. Within laboratory testing, an important test is climatic testing to evaluate the behaviour of materials under different environmental conditions.

Our CCK-0/125T chamber has been manufactured to meet the curing tests of composite materials at high temperature and high humidity, as well as for environmental tests under working conditions of drying, in this way, the specimens will be conditioned to be subsequently tested in physical-chemical tests under different loading conditions. In addition, the chamber has been equipped with a gas with GWP below 150 in accordance with the new F-Gas.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

STRESS SCREENING CHAMBER FOR AUTOMOTIVE INDUSTRY. MODEL: CCK-70/1371T-10

Current environmental tests have become increasingly demanding in the temperature gradients to which the part will be subjected. One of the most widely used tests today is the accelerated stress screening (ESS) test, during which the part to be tested is subjected to high cooling or heating gradients that can range from 5 K/min to 15 K/min.

DYCOMETAL in its eagerness to develop new products according to customer specifications, has developed the CLIMATIC CHAMBER, model CCK-70/1371T-1P, with an interior volume according to the space requirements of the customer, as well as a test gradient of 10 K/min.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CLIMATIC TEST CHAMBER FOR TESTING POWER ELECTRONICS, MODEL: CCK-40/4357MT

The railway sector is one of the most important transport sectors on the planet for both people and goods, and is a sector with continuous investment in R&D&I with a view to improving the energy efficiency of the systems, increasing performance, reducing weights, etc. The components installed include power electronic equipment such as pulse sources, transducers, light indicators, etc. During the production process, compliance with the needs and requirements must be verified, applying the quality standards and regulations that must be applied. In order to verify correct operation in the most extreme environments, it will be necessary to carry out the necessary tests to guarantee the functionality of the equipment.

Our climatic test chamber CCK-40/4357MT allows testing of large and heavy power electronic equipment, subjecting them to the most extreme temperature conditions according to regulations, as well as performing high temperature and high humidity climatic tests according to customer specifications.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TESTING CHAMBER FOR POWER ELECTRONIC EQUIPMENT TESTS.

WELDED WALK-IN CLIMATIC TEST CHAMBER FOR MECHATRONIC PARTS, MODEL: CCK-40/12936T

Mechatronics is a fundamental pillar for developing manufacturing processes by combining mechanics, electronics, computing and control. This branch of engineering is key to the automotive sector, combining mechanical, electrical, electronic and sensor systems. Within the automotive sector, mechatronics plays a fundamental role in a sector that is constantly trying to develop new and better technologies.  

The CCK-40/12936T chamber has been developed according to the specifications of one of the main customers within the mechatronics sector, so that the different elements can be tested to ensure the comfort, safety and efficiency of the vehicle.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR MECHATRONICS.

SMALL VISITABLE OR WALK-IN CHAMBER FOR PHARMACEUTICAL STABILITY TESTS MODEL: CM-0/3358m

Pharmaceutical stability chambers can be either compact, modular or walk-in, depending on the number of samples to be tested, but sometimes, compact chambers (600 or 1200 litres) cannot store the desired number of samples to be tested as they are too small in volume. The solution, a small chamber that can be visited.

The CM-0/3358m chamber has a small volume but is used to the maximum to be able to contain a large number of samples in parallel for testing. Its two side shelves with 7 levels per shelf allow a large amount of storage space and the samples can be placed as ergonomically as possible. In addition, the chamber can be installed in a small space, making maximum use of the available space. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR PHARMACEUTICAL STABILITY TESTING.

CLIMATIC TEST CHAMBER FOR THE STUDY OF PHOTOSENSITIVE SENSORS, MODEL: CCK-40/300T

There are a considerable number of sensors for measuring all kinds of physical or chemical parameters, among which there are some sensors that can be photosensitive, where light can affect their performance. These sensors, as well as those that are not affected by light, must be subjected to climatic and thermal tests, to verify their performance under extreme conditions, but with the proviso that they must be climatic tests without the presence of light. For this purpose, the climatic chamber is built with a blind door, without a window, so that light access to the test chamber is reduced to a minimum. In addition, other parameters are taken into account to avoid possible reflections inside the chamber.

The CCK-40/300T climatic chamber has been modified to reduce the possible entry of light as much as possible, so that the sensors are not affected. It also has the capacity to control the climatic variables necessary to stress the electronic boards and photosensitive sensors.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the Climatic Chamber FOR THE STUDY OF PHOTOSENSITIVE SENSORS.

SPECIAL CLIMATIC TEST CHAMBER FOR PALEONTOLOGICAL TESTS. MODEL, CCK-25/2340MTe

Taphonomy is the part of palaeontology that studies the processes of fossilisation and the formation of fossil deposits. The aim of a test laboratory is to simulate the environmental conditions to which fossils will be subjected in nature, under controlled and repeatable conditions. This will require a very special chamber that encompasses all types of environmental tests possible in nature and anywhere in the world: temperature control, cryogenics, humidity, rain, carbonation and solar radiation.

The CCK-25/2340MTe chamber model was created with this premise in mind, the control of multiple variables existing in nature, within a medium volume and vertical chamber, in order to simulate the conditions to which the fossils will be subjected in real life. The equipment has several environmental simulation options that can be controlled both individually and as a whole, depending on the combination.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL, a company with more than 35 years of experience in the development of chambers for the simulation of environmental tests, offers its customers SPECIAL SYSTEMS DESIGNED IN ACCORDANCE WITH CUSTOMER SPECIFICATIONS.

EXTERNAL CONDITIONING SYSTEM FOR THE AERONAUTICAL SECTOR, MODEL: CCK-60/1000g

Within the aerospace industry there are a large number of parts of different sizes and with different performances, from the smallest microchip in on-board electronics to the curing of a composite, which often makes it difficult to choose a single unit that can cover all possible tests and sample sizes.

The CCK-60/1000g external conditioning unit or generator, was designed with the customer to cover a wide range of possibilities: from the testing of a small sample in a 1 m3 test box to the possibility of being connected to large curing rooms or test benches. Its cooling unit allows to condition even 9 m3 rooms, and it is designed to guarantee high temperature and high humidity tests, or dry environments. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the EXTERNAL CONDITIONING UNIT.  

CLIMATIC TEST CHAMBER FOR GARDEN MACHINERY. MODEL: CCK-25/12085M.

The vast majority of the common elements that surround us are tested in climatic environments to verify the quality, durability and behaviour over time under the climatic conditions that they have to withstand throughout their useful life. One of these common elements are lawn mowers, which are tested under low and high temperature and humidity conditions to verify their resistance to atmospheric agents.

The climatic test chamber CCK-25/12085M has been designed to accommodate both small mowers and larger machines where one person can sit. Its large volume allows several machines to be tested in parallel or individually. The MODUBLOC configuration allows the movement of the chamber and easy installation.   

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS to perform such tests.

CLIMATIC TEST CHAMBER FOR DEFENSE SECTOR. MODEL: CCK-75/2000 2P NG.

Among the different sectors that use environmental testing equipment, one of the most demanding in terms of testing and safety is the Defense sector, where any component to be used in the field must be tested under the most extreme conditions of temperature and humidity.

The CCK-75/2000 2P NG climatic test chamber is prepared to house both large, heavy parts and numerous small samples to carry out the most demanding tests, both at low and high temperatures or under humid conditions. The CCK-75/2000 2P NG, being a standard design, has been prepared with added safety features, according to the requirements of this important sector. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS to perform such tests. 

CLIMATIC CHAMBER FOR THERMAL INSULATION TESTS, MODEL: CCK-25/6800

 The European guide EAD-040287-00-0404, establishes the bases for the construction and testing of thermal insulation systems, indicating a series of tests to verify their reliability, among which are the hygrothermal behavior tests, which must be carried out in a climatic chamber.

The CCK-25/6800 climatic chamber model has been designed and built in a robust way to guarantee maximum durability over time against these heating/rain and heating/cooling cycles. The CCK-25/6800 will allow one or two ETICs to be tested in parallel.

If you want more information you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBER FOR BUILDING WALLS TESTING.

PRODUCT BULLETIN: CCK-AMB/3600m CLIMATIC CHAMBER FOR CONDITIONING OF POLYAMIDES

Nowadays, plastic parts compose much of the things that surround us: cars, computers, etc. These pieces have to pass different quality controls in order to guarantee the durability of them.  One of the most used plastic is the polyamide. The polyamides possess magnificent mechanical properties, a very high tenacity and excellent characteristics of sliding and resistance to wear. The polyamide pieces must be enriched with water to achieve dimensional    stability and impact resistance.  This humidity process could be done in a climatic chamber under conditions of high temperature and high humidity.

CCK-AMB/3600m is a climatic chamber designed to maintain the high temperature and high humidity necessary to cure plastics. The chamber has a psychometric measurement to have a high precision in the high humidity option. 

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers CLIMATIC CHAMBERS to do these tests.

PRODUCT BULLETIN: WALK-IN Humidostatic Chamber for Corrosion Tests

The corrosion tests by condensation are oriented to know the behavior of the samples under conditions of high humidity and high temperature, checking if there is some type of defect in the protection facing an accelerated study. The most common standards are: ISO-6270-2 and ASTM D2247, BS 3900,… The typical humidostatic chambers are small to do test to a big samples like some automotive components, so it’s is necessary to do the test in a bigger chamber, walk-in chamber. 

CHMD-7436 is a humidostatic chamber prepared for the big samples.  Reinforced floor allows introduce heavy samples, and the walk-in configurations facilitates the placement of the samples (big or smaller). Dycometal offers a customized solution for this kind of chambers.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers HUMIDOSTATIC CHAMBERS to do these tests.

PRODUCT BULLETIN: CH-572, WATER CONDENSATION TEST CHAMBER

The corrosion tests by condensation are oriented to know the behavior of the samples under conditions of high humidity and high temperature, checking if there is some type of defect in the protection facing an accelerated study.  The most common standards are: ISO-6270-2 and ASTM D2247, BS 3900,…

The chambers for condensation test are used in several markets like: automotive, burnish, paints, lights, glasses, etc.

CH-512 chamber has been designed to resolve the problem of the biggest samples. The design of the chamber allows to the customer to introduce from the smallest screws to the biggest lights.

More information in: www.dycometal.com

 DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers humidostatic chambers.

GM 4465, General Motors, Humidity Test

The most manufacturers have their own testing standards In the automobile sector. This is one example of it, the GM 4465 standard from General Motors. 

To comply this test, the samples will be exposured to a water fog, with a fallout rate between 1 and 2 ml/80cm2/hour. The temperature of the cabinet will be +38ºC and the relative humidty will be 100% RH, These conditions must remain constant during the cycle.

CH-2000 - Humidity Test Chamber (2000 liters)

More information: www.dycometal.com 

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic chambers (Condensation chambers) to carry this  tests.

ASTM D2247, WATER-RESISTANT 100% RH

This standard is used in order to test the water resistance of coatings using treated specimen to a high humidity and high temperature exposure, until condensation on the elements to be tested.

It will create an atmosphere consisting of a heated mixture of saturated air and water vapor. The temperature is 38°C and a relative humidity of 100%. This environment is kept in steady state conditions until you go producing condensation in samples. You will be subsequently evaluated the piece being tested.

CH-572, HUMDISTATIC CHAMBER(572 Liters)

More information at: www.dycometal.com

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic chambers (Condensation chambers) to carry this  tests.