PROHESION, MODIFIED SALT SPRAY TEST, ASTM G85-ANNEX A5

ASTM G-85 is a corrosion standard that establishes a number of methods for modified salt spray testing. These variations described in the standard are useful when a different or more corrosive environment than the salt spray described in ASTM B117 tests is desired. This method is applicable to both ferrous and non-ferrous metals, as well as organic and inorganic coatings.

Within this standard, Annex A5 establishes test criteria based on stages of slightly acidified salt spray, followed by exposure to drying at a temperature above the test temperature by inlet of fresh, unsaturated air. These conditions have to be taken into account when designing the chamber, since this second stage requires a modification of a standard salt spray.

The SSC salt spray chamber models can have this test in their configuration by means of a design and programming modification, and this test can be carried out as an option of the standard configuration in any of the models offered.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

SALT FOG CHAMBER (CORROPTION TESTS) FOR TECHNOLOGICAL CENTERS, SSC-1000 NG

 Technology centres are private or independent companies responsible for quality conformity assessment through testing and certification. In order to carry out their tasks, these centres have a variety of equipment to guarantee the quality and durability of the different materials and components they receive. One such test is the corrosion test under salt atmosphere or salt spray, which evaluates the corrosion resistance according to different standards.

The SSC-1000 NG chamber is a widely supplied model among our customers as it has a medium-large volume that allows testing of samples of moderate size or a large volume of samples. It also has a control and recording system based on a colour touch screen to be able to store the test records and later present the relevant report. A complete system for a wide range of tests.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

SSC-2000 NG, SALT SPRAY CHAMBER. CORROSION TESTS FOR DEFENCE INDUSTRY

A reference standard within the environmental tests applied in defence is MIL STD-810, which is a guide on the different environmental tests necessary to apply depending on the type of sample. And within this standard, there is a section referring to corrosion tests in a saline atmosphere. This type of test is carried out in chambers known as salt spray chambers. The samples to be tested can be large batches or large sizes. Our model SSC-2000 NG is the ideal model when a large working space is required.

The SSC-2000 NG has an actual volumetric capacity of 2000 litres, with internal dimensions of 1000 x 2000 x 1000 (H x W x D), with a reinforced floor capable of supporting large batches of samples or heavy samples. The equipment is supplied with support bars to place or hang the samples and a floor protection against impacts. Control is via a colour touch screen with data logging and export capability.

A large volume for a large number of samples.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

SSC-1000 NG, SALT SPRAY CHAMBER FOR MIL-STD 810 TESTING

 Introducing the innovative SSC1000NG Salt Fog Chamber!

Designed to meet the stringent MIL-STD 810 standard, our SSC1000NG is the ultimate solution for accelerated corrosion testing. This chamber is specifically developed to handle large and heavy samples, ensuring precise and reliable results in every test.

Key Features:

– MIL-STD 810 Compliance: Meets the most demanding standards for corrosion testing.

– Large Capacity: Ideal for large and heavy samples without compromising the integrity of the test.

– Advanced Technology: Equipped with state-of-the-art control and monitoring systems to ensure uniformity and repeatability of tests.

– Robust Construction: Built with high-quality materials to withstand intensive laboratory environments and ensure long-lasting durability.

With the SSC1000NG, your laboratory will be equipped to tackle the most complex challenges in corrosion studies, providing critical data for the improvement and development of corrosion-resistant materials.

Discover today how the SSC1000NG Salt Fog Chamber can transform your corrosion testing! For more information and demonstrations, visit our website or contact us directly.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

NEW SALT SPRAY CHAMBER, SSC-400 NG

Our SSC- Salt Spray Chambers are one of the most demanded products by our customers, being the SSC-400 NG one of the most sold products thanks to its aesthetics. From Dycometal we have made both aesthetic and technical adjustments in our star model, SSC-400 NG.

The new salt spray chamber has a light grey plastic casing, with a light grey plastic canopy, to give the system a more modern touch. The control is still based on a colour display/recorder, which allows data to be recorded and exported to an external computer so that reports can be made on the tests carried out.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

EXTERNAL CONDITIONING UNIT FOR ELECTRICAL ENGINE TESTING, MODEL: AFA-150/300g

The growing demand for electrical equipment has increased the need for ever more demanding climatic testing to ensure system reliability. The extreme conditions that these parts will face can range from cold winter to the highest desert temperatures.

The external conditioning unit, model AFA-150/300g, was designed to ensure the operation of the electrical machine in extreme positive temperature conditions. The external box was designed to be adapted to the customer's existing test bench in such a way that it could be adapted as much as possible without altering the configuration of the test bench. The test chamber has two replaceable doors so that both the generator and the test stand can be used as a normal system to increase its usefulness.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers EXTERNAL CONDITIONING UNITS FOR ENGINE TESTINGS.

LARGE VOLUME THERMAL SHOCK CHAMBER - 2500 LITRES, MODEL: CRT2H-40/2500

Thermal shock chambers are a fundamental element for the thermal fatigue testing of materials, equipment and automatisms. They are predominantly used in the following industries: aeronautics, automotive, military, electronics, telecommunications, space and, in general, in the materials research industry. The configuration of these chambers is usually vertical, but when the parts have a very large volume, it is necessary to opt for a horizontal design that allows the thermal shock to be carried out from right to left and vice versa.

The CRT2H-40/2500 thermal shock chamber was a great challenge for Dycometal, since few chambers with this volume have been manufactured, nor so demanding. The development of the chamber was carried out by our technical and design department with the customer, designing equipment in accordance with their requirements.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers LARGE VOLUME THERMAL SHOCK CHAMBER.

WELDED WALK-IN CLIMATIC TEST CHAMBER FOR MECHATRONIC PARTS, MODEL: CCK-40/12936T

Mechatronics is a fundamental pillar for developing manufacturing processes by combining mechanics, electronics, computing and control. This branch of engineering is key to the automotive sector, combining mechanical, electrical, electronic and sensor systems. Within the automotive sector, mechatronics plays a fundamental role in a sector that is constantly trying to develop new and better technologies.  

The CCK-40/12936T chamber has been developed according to the specifications of one of the main customers within the mechatronics sector, so that the different elements can be tested to ensure the comfort, safety and efficiency of the vehicle.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR MECHATRONICS.

CLIMATIC TEST CHAMBER FOR THE STUDY OF PHOTOSENSITIVE SENSORS, MODEL: CCK-40/300T

There are a considerable number of sensors for measuring all kinds of physical or chemical parameters, among which there are some sensors that can be photosensitive, where light can affect their performance. These sensors, as well as those that are not affected by light, must be subjected to climatic and thermal tests, to verify their performance under extreme conditions, but with the proviso that they must be climatic tests without the presence of light. For this purpose, the climatic chamber is built with a blind door, without a window, so that light access to the test chamber is reduced to a minimum. In addition, other parameters are taken into account to avoid possible reflections inside the chamber.

The CCK-40/300T climatic chamber has been modified to reduce the possible entry of light as much as possible, so that the sensors are not affected. It also has the capacity to control the climatic variables necessary to stress the electronic boards and photosensitive sensors.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the Climatic Chamber FOR THE STUDY OF PHOTOSENSITIVE SENSORS.

CLIMATIC TEST CHAMBER FOR DRIVING MIRRORS, MODEL: CCK-40/588e

A vehicle’s driving mirrors can range in size from the smallest in a utility vehicle to the new larger mirrors in a van or truck. Moreover, their vertical geometry makes it difficult for them to fit into a vehicle position in a conventional climatic chamber. If we add to this the fact that laboratories have limited space for the chambers, then the design has to be well thought out.

The CCK-40/588e test chamber has been developed to meet all customer requirements: tight budget, limited space and a wide range of sample sizes. A model that meets the most stringent automotive standards and fits the space available for the chamber in the laboratory. 

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CUSTOM MADE CLIMATIC TEST CHAMBERS. 

EXTERNAL CONDITIONING SYSTEM FOR THE AERONAUTICAL SECTOR, MODEL: CCK-60/1000g

Within the aerospace industry there are a large number of parts of different sizes and with different performances, from the smallest microchip in on-board electronics to the curing of a composite, which often makes it difficult to choose a single unit that can cover all possible tests and sample sizes.

The CCK-60/1000g external conditioning unit or generator, was designed with the customer to cover a wide range of possibilities: from the testing of a small sample in a 1 m3 test box to the possibility of being connected to large curing rooms or test benches. Its cooling unit allows to condition even 9 m3 rooms, and it is designed to guarantee high temperature and high humidity tests, or dry environments. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the EXTERNAL CONDITIONING UNIT.  

CLIMATIC TEST CHAMBER FOR DEFENSE SECTOR. MODEL: CCK-75/2000 2P NG.

Among the different sectors that use environmental testing equipment, one of the most demanding in terms of testing and safety is the Defense sector, where any component to be used in the field must be tested under the most extreme conditions of temperature and humidity.

The CCK-75/2000 2P NG climatic test chamber is prepared to house both large, heavy parts and numerous small samples to carry out the most demanding tests, both at low and high temperatures or under humid conditions. The CCK-75/2000 2P NG, being a standard design, has been prepared with added safety features, according to the requirements of this important sector. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS to perform such tests. 

ASTM D2247, WATER-RESISTANT 100% RH

This standard is used in order to test the water resistance of coatings using treated specimen to a high humidity and high temperature exposure, until condensation on the elements to be tested.

It will create an atmosphere consisting of a heated mixture of saturated air and water vapor. The temperature is 38°C and a relative humidity of 100%. This environment is kept in steady state conditions until you go producing condensation in samples. You will be subsequently evaluated the piece being tested.

CH-572, HUMDISTATIC CHAMBER(572 Liters)

More information at: www.dycometal.com

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic chambers (Condensation chambers) to carry this  tests.

ASTM D1735, WATER RESISTANCE

This type of test is intended for the analysis of coatings and its resistance to corrosion from exposure to water, at high temperatures.  

The samples will be exposed to a water fog. The temperature of the chamber is 38ºC, and the fallout rate between 1,5 y 3 ml/80 cm2/ hora. Time of test would be variable.

CH-2000, Humidostatic test chamber for big samples (2000 liters)

 More information at: www.dycometal.com

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic chambers (Condensation chambers) to carry out climatic tests.

WALK-IN Salt Spray Chamber

One of the most important destructive agents of the nature is the corrosion, being one of the principals causes of economic lose.

All the markets: automotive, aeronautical, railway, paints or any type of metal treatment industry, have corrosion test simulation inside their quality standards. Sometimes, the samples to be tested are too big, so they need solutions with bigger volumes. In this case, we use the Walk-in Salt Spray Chambers.

The Salt Spray Corrosion Test consists of an accelerated corrosion attack by an artificial salt spray of a certain composition, in the exact conditions of temperature and pressure. To do this type of tests, it uses the salt spray chambers.

Standards like: ASTM B117, DIN 50 021 or DIN 50 017, establish a test parameters to simulate the most aggressive atmospheres.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers WALK-IN Salt Spray Chambers to carry out such tests.

ASTM B117, Neutral Salt Spray Test NSS

ASTM B117 is used to test the corrosion resistance of metallic parts with or without coating; exposing the sample saline atmospheres and high temperature

The samples are introduced into the chamber with an acid atmosphere, pH between 6’5 to 7’2, and temperature of 35ºC. The collection rate must to be between a to 2 ml/hour. The collector will have a surface of 80 cm²  

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-SS, Neutral salt Spray Test

The DIN 50 021-SS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline acid saline atmospheres and high temperature

The samples are introduced into the chamber with an acid atmosphere, pH between 6’5 to 7’2, and temperature of 35ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 2 ml/hour. The collector will have a surface of 80 cm²

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-ESS, Acid Salt Spray Test

The DIN 50 021-ESS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline acid saline atmospheres and high temperature.

The samples are introduced into the chamber with an acid atmosphere, pH between 3’1 to 3’3, and temperature of 35ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 2 ml/hour. The collector will have a surface of 80 cm²  .

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-CASS Copper-Acetic Salt Spray Test

The DIN 50 021-CASS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline copper-acetic saline atmospheres and high temperature.

The samples are introduced into the chamber with an acid atmosphere, ph between 3’1 to 3’3, and temperature of 50ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 1 to 2 ml/hour.   

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 017 - KK; Humidostatic test.

The DIN 50 017 standard is used to analyze the protective coating of the samples.

The sample will be tested in a heated and sutured atmosphere (temperature must be +40ºC) and relative humidity of 100%. This conditions will be constant in all the duration of the test.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Humidostatic Chambers to carry out such tests.