There are a considerable number of sensors for measuring all kinds of physical or chemical parameters, among which there are some sensors that can be photosensitive, where light can affect their performance. These sensors, as well as those that are not affected by light, must be subjected to climatic and thermal tests, to verify their performance under extreme conditions, but with the proviso that they must be climatic tests without the presence of light. For this purpose, the climatic chamber is built with a blind door, without a window, so that light access to the test chamber is reduced to a minimum. In addition, other parameters are taken into account to avoid possible reflections inside the chamber.
The CCK-40/300T climatic chamber has been modified
to reduce the possible entry of light as much as possible, so that the sensors
are not affected. It also has the capacity to control the climatic variables
necessary to stress the electronic boards and photosensitive sensors.
If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .
DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the Climatic Chamber FOR THE STUDY OF PHOTOSENSITIVE SENSORS.
