CHAMBER FOR TESTING ON ELECTROMECHANICAL AND ELECTROTECHNICAL SAMPLES, ESS

 In the automotive sector there are many components that have to be tested to verify their performance under the most extreme conditions, with electronic and electrotechnical components being among the most important components in a sector that is becoming more and more technologically advanced.

Our CETM-70/1500T-9 chamber has been developed for our customer according to his needs. With a low loading height for easy loading and working, the equipment has 8 removable trays for easy handling of the samples. In the thermal section, the chamber allows stress cycling (ESS) thanks to its cooling and heating speed of 9 K/min.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

SPECIAL STRESS SCREENING CLIMATIC CHAMBER (ESS), 15 K/min – AIR COOLED

Our equipment is so special that it is completely custom-designed, such as the CCK-70/343T-15 model, a completely custom-designed chamber, from the interior of the chamber modified according to the customer’s needs and positioned at an ergonomic working height, through a 10″ control screen, a 15″ screen-based PC system and wall pass-throughs according to the specifications required by the customer. An air-cooled chamber with a cooling and heating rate of 15°C/min between +75°C and -45°C taking into account the customer’s mass and air-cooled.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CLIMATE CHAMBER BUILT ACCORDING TO THE CUSTOMER’S NEEDS, MODEL: CCK-40/1000T-6

Climatic chambers can be built according to customer requirements. Inner dimensions, outer dimensions, temperature ranges, humidity conditions, etc. can be changed. One of the most demanded points is the modification of the standard temperature gradients of the equipment, i.e. the cooling and heating speed. All our systems are completely flexible, being able to change any option of the equipment under the advice of our technical team. Such is the case of the chamber that we present below, the CCK-40/1000T-6. This chamber has a gradient of 6 K/min in cooling and 8 K/min in heating, keeping the other conditions unchanged: interior volume, interior dimensions, temperature ranges, etc.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

STRESS SCREENING CHAMBER (15 K/min), FOR ELECTRONICAL COMPONENTS – AIR COOLED. MODEL, CETM-70/1000T-15

High-gradient testing, or ESS, in the development of electronic components serves to detect defective components by "stimulation", not "simulation", by overcoming the expected environmental conditions that the samples will undergo. 

The thermal test chamber model CETM-70/1000T-15, has been configured according to all the customer's needs. With a 10" touch screen control panel, it allows precise control of the temperature parameters. Due to the customer's installation, the chamber had to be air-cooled, with the cooling unit positioned at a distance of 25 metres. It also has an additional 15" control panel with integrated software for powerful analysis in the chamber itself.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

STRESS SCREENING CHAMBER FOR AUTOMOTIVE INDUSTRY. MODEL: CCK-70/1371T-10

Current environmental tests have become increasingly demanding in the temperature gradients to which the part will be subjected. One of the most widely used tests today is the accelerated stress screening (ESS) test, during which the part to be tested is subjected to high cooling or heating gradients that can range from 5 K/min to 15 K/min.

DYCOMETAL in its eagerness to develop new products according to customer specifications, has developed the CLIMATIC CHAMBER, model CCK-70/1371T-1P, with an interior volume according to the space requirements of the customer, as well as a test gradient of 10 K/min.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

TEMPERATURE TEST CHAMBER FOR TESTING ON TRANSMITTING ANTENNAS, MODEL: CETM-40/979MT

Mobile telephony has become one of the essential elements of our daily lives, and it would be unthinkable for us not to have this technology at our disposal one day. This technology is based on the use of transmitting antennas, which have become part of our natural environment and which must be able to withstand the most aggressive environmental conditions: rain, solar radiation, extreme temperatures (desert or polar), etc. To this end, antenna manufacturers must have a laboratory prepared to simulate real environmental conditions, taking into account the energy dissipation that the antennas will generate during operation, thus guaranteeing correct operation 365 days a year.

The temperature test chamber CETM-40/979MT was designed to reach extreme operating temperatures, taking into account the energy dissipation of the transmitting antennas as well as its own mass. Its mobile design allows the chamber to be easily moved and its reduced volume makes it a space-saving chamber in the laboratory. A powerful chamber in a compact package.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL TESTING CHAMBER FOR TESTING MOBILE TELEPHONE ANTENNAS.

CLIMATIC TEST CHAMBER FOR THE STUDY OF PHOTOSENSITIVE SENSORS, MODEL: CCK-40/300T

There are a considerable number of sensors for measuring all kinds of physical or chemical parameters, among which there are some sensors that can be photosensitive, where light can affect their performance. These sensors, as well as those that are not affected by light, must be subjected to climatic and thermal tests, to verify their performance under extreme conditions, but with the proviso that they must be climatic tests without the presence of light. For this purpose, the climatic chamber is built with a blind door, without a window, so that light access to the test chamber is reduced to a minimum. In addition, other parameters are taken into account to avoid possible reflections inside the chamber.

The CCK-40/300T climatic chamber has been modified to reduce the possible entry of light as much as possible, so that the sensors are not affected. It also has the capacity to control the climatic variables necessary to stress the electronic boards and photosensitive sensors.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the Climatic Chamber FOR THE STUDY OF PHOTOSENSITIVE SENSORS.

TEMPERATURE TEST CHAMBER FOR AMMUNITION FIELD TESTS. MODEL, CCK-70/125

Within the quality control of armament ammunition, there are various types of environmental tests: thermal, climatic, solar radiation, corrosion, etc., with thermal tests being one of the most common. During these tests, the parts are subjected to both positive and negative temperatures, and this test has to be carried out both in the laboratory and in real field tests, where the sample is tempered before being used under the indicated conditions. In order to temper the samples, it must be possible to take the chamber to the field.

The thermal test chamber model CETM-70/125 has been developed to maintain a good ergonomics, positioning the control in the upper part of the chamber and the cooling group in the lower part, as well as vibration absorption systems for the transport of the equipment in a comfortable way in a lorry. In addition, the chamber has a temperature range from -70ºC to +150ºC, which allows it to cover all the thermal tests required by customers. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL CHAMBER FOR AMMUNITION TESTING.

CLIMATIC TEST CHAMBER FOR DRIVING MIRRORS, MODEL: CCK-40/588e

A vehicle’s driving mirrors can range in size from the smallest in a utility vehicle to the new larger mirrors in a van or truck. Moreover, their vertical geometry makes it difficult for them to fit into a vehicle position in a conventional climatic chamber. If we add to this the fact that laboratories have limited space for the chambers, then the design has to be well thought out.

The CCK-40/588e test chamber has been developed to meet all customer requirements: tight budget, limited space and a wide range of sample sizes. A model that meets the most stringent automotive standards and fits the space available for the chamber in the laboratory. 

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CUSTOM MADE CLIMATIC TEST CHAMBERS. 

EXTERNAL CONDITIONING SYSTEM FOR THE AERONAUTICAL SECTOR, MODEL: CCK-60/1000g

Within the aerospace industry there are a large number of parts of different sizes and with different performances, from the smallest microchip in on-board electronics to the curing of a composite, which often makes it difficult to choose a single unit that can cover all possible tests and sample sizes.

The CCK-60/1000g external conditioning unit or generator, was designed with the customer to cover a wide range of possibilities: from the testing of a small sample in a 1 m3 test box to the possibility of being connected to large curing rooms or test benches. Its cooling unit allows to condition even 9 m3 rooms, and it is designed to guarantee high temperature and high humidity tests, or dry environments. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the EXTERNAL CONDITIONING UNIT.  

TEMPERATURE TEST CHAMBER FOR HEAVY SAMPLES IN ELECTRONICS, MODEL: CETM-25/1296e

The electronic samples can be small microchips or large iron blocks, but the size does not matter, as they have to be tested in sub-zero and above-zero temperature conditions to verify their thermal resistance, whether they are small samples or large, heavy samples.

The design of the thermal test chamber CETM-25/1296e is based on the premise of being able to test large heavy specimens up to 750 kg. Its horizontal design allows the specimens to be loaded by means of a bridge crane, with a door large enough for the specimens to be placed safely. Its ergonomic design allows the chamber to be controlled from the side of the chamber, and the front wall pass-throughs allow access to the customer's own sampling probes to be positioned on the sample. 

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com.

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the TERMPERATURE TEST CHAMBER FOR HEAVY SAMPLES to perform such tests.

PRODUCT BULLETIN: THERMAL SHOCK CHAMBER AIR TO LIQUID, CRT2VT-25

The AIR to LIQUID thermal shock chamber subjects the test samples to greater stress. The chamber has a double compartment, in the upper zone the air is conditioned at a certain temperature and in the lower area there is a thermostated bath of controlled temperature, between + 2ºC and + 5ºC. The pieces will move through a basket between both compartments suffering the stress process, simulating splash conditions, dives, etc. The sample will move between both compartments to verify that it does not suffer any fracture, crack or apparent damage.

The thermal shock chamber, CRT2VT-25 has been designed for the production process (R&D), so that the most extreme conditions that the samples can supported are analysed. The samples will be tested in the hot zone and go down to the water bath, if the sample doesn’t suffer any damage, then the temperature of the heating zone will be increased and repeat again the operation until the samples suffer a damage.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com 

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers thermal shock chambers air to liquid.

PRODUCT BULLETIN: CCK-45/10000/10 NG, High Gradient Chamber without LN2 (ESS)

The current environmental testing, increasingly have become more demanding in the gradients of temperature that will be submitted the piece. One of the most commonly used tests is currently the trial of accelerated stress or Stress Screening (ESS), during which the part to be tested is subjected to high gradients of cooling or warming. These gradients will submit the samples to high degrees of stress, so that you can check if there is any type of defect in them thus ensuring the quality of the piece and thus avoiding returns during the warranty period.

CCK-45/1000/10 NG has been developed under the guidance of the client, where has been taken into account the more stylized design of CCK NG chambers. The dimensions of the chamber have suitable measures of the space that the customer had, and the control has been placed according to its guidelines on one side, with different accessories such as control flow of air speed or contacts free of potential to be able to generate events. The chamber presents also an access-port on the door that allows the loading of equipment without having to disconnect them by introducing them to the interior.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

 DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Stress Screening Climatic chamber.

Temperature Test chamber

Temperature tests are done in order to simulate the accelerated thermal fatigue with controlled cooling and heating.

It is necessary to use temperature chamber to do these tests. These chambers simulate the temperature conditions along the life of the elements to be tested. The volumes vary from the smallest benchtop chambers to the biggest modular chambers or walk-in chambers.

These chambers have different application, and are used in any kind of sector where the sample will resist severe temperature changes: automotive, aeronautical, electronic, plastics, etc..

·       Studies involving deterioration of the structure of the sample or a change in physical properties due to temperature changes.

·       Accelerated Freeze/thawing tests.

·       surface adhesion assays

Some standards: DIN EN 60068, DIN 40046, IEC 68-2-14Nb, MIL-STD 312A, MIL-STD 810D, MIL-STD 883B, etc.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers TEMPERATURE CHAMBERS to carry out such tests.

Stress Screening Chamber, CCK ESS Series

The environmental tests are more exigent in temperature change rates. One of the most common test are the accelerated stress tests or Stress Screening (ESS); during these tests the sample to be tested must to endure high temperature change rates cooling and heating.

These temperature change rates can be varied between 5 and 12ºC/min. it submit the samples to high stress degree, so it can verify if exist some kind of defect in the samples guaranteeing the quality of the samples, and avoiding returns of samples during the guarantee period.

Some standards:

·  Thermal cycles: IEC 60068-2-14, test Nb, IEC 60721-4, DIN 40046, part 14- test Nb,etc

·  Heating: IEC 60068-2-2, test B, IEC 60721-4, DIN 40046, part 4, test B, DIN 72300-4, etc.

·  Cooling: IEC 60068-2-1, test A, IEC 60721-4, DIN 40046, part 3, test A, DIN 72300-4, etc

·  Alternative climate: IEC 60068-2-30, test Db, Var.1, IEC 60068-2-30, test Db, Var.2, IEC 60068-2-38, IEC 60068-2-4, test D, IEC 60721-4, etc.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers STRESS SCREENING CHAMBERS to carry out such tests.