The AIR to LIQUID thermal shock chamber subjects the
test samples to greater stress. The chamber has a double compartment, in the
upper zone the air is conditioned at a certain temperature and in the lower
area there is a thermostated bath of controlled temperature, between + 2ºC and
+ 5ºC. The pieces will move through a basket between both compartments
suffering the stress process, simulating splash conditions, dives, etc. The sample will move between both compartments to
verify that it does not suffer any fracture, crack or apparent damage.
The thermal shock chamber, CRT2VT-25 has been designed for the
production process (R&D), so that the most extreme conditions that the
samples can supported are analysed. The samples will be tested in the hot zone
and go down to the water bath, if the sample doesn’t suffer any damage, then
the temperature of the heating zone will be increased and repeat again the
operation until the samples suffer a damage.
If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com
DYCOMETAL, company with over 25 years of experience in the development
of Chambers for environmental testing simulation, offers its customers thermal shock
chambers air to liquid.
