PRODUCT BULLETIN: CCK-45/10000/10 NG, High Gradient Chamber without LN2 (ESS)

The current environmental testing, increasingly have become more demanding in the gradients of temperature that will be submitted the piece. One of the most commonly used tests is currently the trial of accelerated stress or Stress Screening (ESS), during which the part to be tested is subjected to high gradients of cooling or warming. These gradients will submit the samples to high degrees of stress, so that you can check if there is any type of defect in them thus ensuring the quality of the piece and thus avoiding returns during the warranty period.

CCK-45/1000/10 NG has been developed under the guidance of the client, where has been taken into account the more stylized design of CCK NG chambers. The dimensions of the chamber have suitable measures of the space that the customer had, and the control has been placed according to its guidelines on one side, with different accessories such as control flow of air speed or contacts free of potential to be able to generate events. The chamber presents also an access-port on the door that allows the loading of equipment without having to disconnect them by introducing them to the interior.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

 DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Stress Screening Climatic chamber.

PRODUCT BULLETIN: CM-0/3900 & CM-0/24000, STABILITY TEST CHAMBER FOR PHARMACEUTICAL INDUSTRY

Pharmaceutical products require validation tests under conditions of temperature and humidity, with very long periods for approval. In addition, the storage capacity of these chambers should be large enough, to secure a number of repetitive enough samples. But sometimes, the space available in the laboratory does not allow large size chambers, so it requires a special custom design to reduce the external volume of the climatic chamber, without sacrificing interior space.

The chambers CM-0/39000m and CM-0/24000m have been adapted to take advantage of the existing space, while maintaining a high storage capacity. Its configuration has been developed to adapt to the corner of the laboratory. Each chamber has different conditions for the realization of the stability studies, having a central control from which monitor and control temperature and humidity parameters.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Climatic Chamber for Pharmaceutical Industry.

PRODUCT BULLETIN: CCK-70/4400, Climatic Chamber for Automotive parts of different sizes

All the components of a vehicle must pass a quality based on an essay climate control: mirrors, interior components, chassis, etc. This control will be used to verify the behaviour of the components throughout its useful life. Method of testing them may be individual, a small chamber, or vehicle position, where will be necessary an adapter or model of the same dimensions as the vehicle itself, to do this, we will need a larger inner chamber.

The CCK-70/4400 is a system with a volume of medium size, which allows you to place pieces to try different sizes, so you can meet most of the trials of the components of the vehicle. Its extensive range of temperatures and humidity, allows you to reach all of the climatic tests, including the most demanding, as the standards VW PV 1200 or VW PV 2005 A.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Climatic Chamber for Automotive Parts.