The starter motors of a vehicle are one of the most
important components. It is necessary to perform its validation under the most
extreme temperature conditions, to verify that they work correctly under the
worst situations. For this, a test bench is developed where the starter motor
must be subjected to different extreme temperatures, both in positive and
negative temperatures, to verify the correct functioning of the equipment. These
types of tests will be carried out in climatic chambers or thermal test. In the
same test bench several starter motors will be tested in parallel, to take
advantage of the space of the chamber, taking into account the energy that will
be generated inside the chamber and that will have to be dissipated.
The
thermal test chamber, CETM-70/490e 2P is a chamber developed to combine
with the customer's test bench, with different ports positioned at a specified
position on both sides of the chamber. The cold group of the chamber has been
calculated to dissipate the energy generated by the starter during the test,
complying with the profile indicated by the customer. The chamber control
system allows communicating with the control of the test bench so that there is
synchronization between them.
If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com
DYCOMETAL, company with over 25 years of experience in the
development of Chambers for environmental testing simulation, offers its
customers Thermal
test chamber for starter motor parts.
