PRODUCT BULLETIN: CCK-0/10725Mf, MODUBLOC PLANT GROWTH CHAMBER

Within the biotechnology sector, climatic chambers have an important application for different applications: arabidopsis, growth of plants, germination of seeds, etc. These chambers present conditions of control of humidity, temperature and solar radiation, as well as the availability of another type of atmospheres. Chambers for plant growth are those that can be used for the cultivation of plants under strictly controlled environmental conditions (temperature, humidity and light). The growth of plants in the Chambers will minimize the impact of environmental variables, reducing the incidence of contamination by pests or disease-causing agents, and allows ideal conditions for the growth of plants in the phase of experimentation.

The CCK-0/10725Mf is a MODUBLOC model, built on a structure that allows the mobility of the chamber, so that it can be easily moved within the same installations or to other installations, and can easily be installed again without the need to disassemble the panels. The chamber is ready for any type of light thanks to its cold set calculated for certain energy dissipation and its humidification system without heat input.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Plant Growth Test Chambers to do these tests.

PRODUCT BULLETIN: CETg/AFA-40-250/3360p ,Characterization and endurance test in harsh conditions

In the automotive sector, there are several critical variables to take into account when quality control tests are carried out; these include dynamic trials or mechanicals, as well as the climatic tests, to ensure the functionality of components manufactured in the most actual conditions that the component will find during its life. Often the conditions by which the components will be subjected may come into conflict with the constructions of the own simulation equipment, as for example, a piece of engine, where in addition to mechanical wear, must withstand extreme temperatures below 0°C or above + 200°C.

CETg/AFA-40-250/3360p of DYCOMETAL, has been designed to be able to simulate the extreme climatic conditions, both in temperature positive as negative. Its manufacture at two separate components ensures the reproduction of the temperature conditions when overcome the limits of climatic chambers, while a mechanical arm simulates conditions on different shafts that the automotive component will face during its using.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers SPECIAL DESIGNS FOR SPECIAL SOLUTIONS to do these tests.

PRODUCT BULLETIN, CRT2V-70/300, Temperature Shock Test Chamber with Special Volume

Thermal shock Chambers are an essential element for the realization of thermal fatigue in materials, equipment, and automation. Their use predominates in the industries: aerospace, automotive, military, Electronics, telecommunications, space and generally in the industry of materials research. Thermal Shock Chambers have been commonly used in the aerospace industry and aerospace, where the materials must withstand sudden changes in temperature in a very short period of time, but its use has been implemented in other industries such as electronics, where are the studies of weak points and subsequent failures during use, thus minimizing warranty costs.

The chamber CRT2V-70/300 has been designed according to the size of the pieces of the customer. The workspace has been made according to the dimensions and weight specifications and complying with the regulations established by the customer.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers THERMAL SHOCK CHAMBERS to do these tests.

PRODUCT BULLETIN: CLL-4500e, Rain Test Chamber for Durability Test of Wiper

Wipers aim to provide the driver visibility conditions minimum through the sweep of the outer surface of the windscreen. To do this they must pass a test of endurance and durability under various controlled conditions. During this test, the sweep rate of the wiper should be editable throughout the trial, sprayed water flow will be controlled and such water must have certain conditions of quality. The water flow must be symmetrically distributed on the windshield as well as having a certain temperature. The entire process should be evaluated for a number of cycles in accordance with the rules established.

The CLL-4500e chamber has been designed to introduce the complete windscreen inside of the chamber, so that the test would be the most faithful to the reality. The chamber presents a double wing door with total access to the workspace so that the introduction of the samples is convenient. The vision system of the rain test chamber allows an analysis of the behaviour of the wipers and the water.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers RAIN TEST CHAMBERS to do these tests.

PRODUCT BULLETIN: CLIMATIC CHAMBER FOR PHARMA STABILITY TEST ACC. WITH 21 CFR PART 11

The 21 CFR Part 11 is used to permit the possible use of electronic technology in pharmaceutical industry. This rule was developed by the FDA (Food & Drug  Administration), and is divided in two main sections: Electronic Records and    Electronic Signatures. The FDA developed the 21 CFR Part 11 rule to describe the electronic records and signatures requirements so that they are secure.

CM-0/1200 ICH is a compact chamber designed to make test in a high number of samples at the same time, but reducing the space that the climatic chamber occupy in the laboratory. This chamber is configured with the new controller/data recorder unit in order to comply the pharmaceutical stability test with the best accuracy and stability. According ICH guidelines and FDA.  

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers CLIMATIC CHAMBERS to do these tests.