MIL-STD810H method 524.1 freeze-thaw, CCK-T series climate chambers

The purpose of this freeze-thaw test method is to determine the material’s ability to withstand the effects of moisture phase changes between liquid and solid, in or on the material, as the ambient temperature passes through the freezing point and the effects of moisture induced by transfer from a cold to a warm environment or from a warm to a cold environment.

This method is applicable to materials that will be exposed to temperatures above the freezing point while wet or in the presence of moisture, to induce physical changes in the material and evaluate resistance to distortion or jamming of moving parts, failure of bonding materials, seals, etc.

This method establishes three test procedures: diurnal cycle effect, fogging, or rapid temperature change.

DYCOMETAL’s CCK-T climatic chambers are designed to accurately reproduce the most demanding environmental conditions in compliance with the requirements of MIL-STD-810H, method 524.1, guaranteeing the ability to simulate thermal cycles and environmental conditions according to the most rigorous military standards. This allows the behaviour and resistance of equipment to be verified in the face of extreme temperature variations, ensuring its performance and durability in any operating environment.

With CCK-Ts, laboratories and testing centres have a robust, accurate and compliant solution to ensure the quality and reliability of their products.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

FREEZE-THAWING CHAMBER FOR BUILDING MATERIALS, CHD-896

 Building materials installed outdoors have to withstand strong climatic conditions for years: rain, ice, sun, wind, etc. In winter is when they experience the greatest thermal changes with day/night cycles, with moisture absorption during the day, frost at night, rain, etc., causing significant degradation of the material. This is why it is important to subject the products to the most demanding quality controls.

The freeze-thaw chambers are designed to carry out the most demanding thermal tests. Our model CHD-896 has been a modification in terms of interior volume of our standard designs to meet the load requirements. The equipment consists of a thermal test chamber in a horizontal configuration for greater ergonomics and a thermostatised bath to temper the water so that there is recirculation inside the chamber to carry out the defrosting at the temperature indicated by the standard.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.