DYCOMETAL LES DESEA FELICES FIESTAS

PRODUCT BULLETIN: CCKMD-25/7578, Climatic Chamber for Cardboard Industry

The environmental tests are very important tests when the atmospheric conditions will have influence in the behavior of the samples of the package or its materials. The complete and full packaging can be exposed to one or more of these atmospheric conditions during periods which may vary from a few hours to several days.

Environmental tests range from freezing tests at –18ºC,without humidity control to the tropical conditions at +30ºC and 90% RH.

CCKMD-25/7578, has been developed to cover all the environmental situation covered in the standard for the testing of complete and full packaging.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Climatic chamber to do these tests.

PRODUCT BULLETIN: CCK-0/1200, Climatic Chamber for Mortar Curing

Curing is a very important stage in the process of hardening of the mortar, at this stage the mortar will develop its main physical characteristics under controlled conditions of temperature and humidity. It should take into account that the mortar is susceptible to adverse environmental conditions, such as high temperatures and low relative humidity. The chamber climate will allow have a control exhaustive of the temperature and the humidity, so the process of curing is it the most accurate possible.

More information at: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the Climatic chamber to do these tests.

PRODUCT BULLETIN: CCK+BT, Special Design for Climatic Test for Sensors

The sensors installed in water pipes (temperature, humidity, pressure and caudal) must be evaluated in order to verify their performance along the time. The test must be done, not only in the sensors, if not in the associated electronics. For that, it is manufactured a special accelerated aging bench. This equipment simulate the environmental conditions under the sensors will work along their useful lifetime.

The test combines the simultaneous performance of one climatic simulation and a water circuit with controlled variables: temperature, pressure and caudal. 

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the Special designs.

PRODUCT BULLETIN: CV-60/1200, Forced Air Vertical Freezer for Automotive Industry

Forced air freezers have their application field in the conditioning of samples, the fast freezing of liquid substances and thermal fatigue studies. They are used in several markets like: building materials, plastics, rubbers, etc.

The advantages over the static freezer are: the airflow, the faster cooling velocity, the temperature recovery times and the higher stability. These equipments could be custom manufactured in different volumes or temperature range.

Vertical configuration, allows to the customer, reduces the necessary installation space compared with the horizontal configuration, and gives the equipment more ergonomic position to introduce the samples to the workspace.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the Vertical Forced Air Freezer.

PRODUCT BULLETIN: CCK-25/180c, Carbonation Chamber

The carbonation is the pH loss when the atmospheric CO2 reacts with the humidity of the concrete samples, generating an acid atmosphere. This process happens all days, and affects to the reinforced concrete and induces the corrosion of the steel. The structures could suffer a serious damage.

Carbonation tests will be done in modified chambers with CO2 detector/analyzers with the possibility to detect the CO2 concentration in different range of temperature and humidity. It’s recommended manufacture the chamber with a robust stainless steel alloy because the gas of the reaction are corrosive, for example AISI 316.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for building material industry.

PRODUCT BULLETIN: CCK-45/8000, Climatic Chamber for VW Tests

Two of the most difficult tests to comply in the automotive markets are the VW PV 1200 and VW PV 2005 standards. These standards require a specific control of the humidity during the cycle.

CCK-45/8000 is a climatic chamber with big dimensions to introduce several samples at the same time. The exterior system of the car has big dimensions, so the chamber has been designed with a big width to introduce the samples easily. The removable ramp facilitates the introduction of the samples to the workspace.

More information in: www.dycometal.com .

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for automotive industry.

PRODUCT BULLETIN: CH-572, WATER CONDENSATION TEST CHAMBER

The corrosion tests by condensation are oriented to know the behavior of the samples under conditions of high humidity and high temperature, checking if there is some type of defect in the protection facing an accelerated study.  The most common standards are: ISO-6270-2 and ASTM D2247, BS 3900,…

The chambers for condensation test are used in several markets like: automotive, burnish, paints, lights, glasses, etc.

CH-512 chamber has been designed to resolve the problem of the biggest samples. The design of the chamber allows to the customer to introduce from the smallest screws to the biggest lights.

More information in: www.dycometal.com

 DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers humidostatic chambers.

PRODUCT BULLETIN: CETM-40/48, Benchtop Temperature Test chamber

Sometimes, the laboratories have space limitation and it’s not possible to install one climatic chamber of big dimensions. Another time, the quantity of the samples to test are not a lot, or the samples are not big, so it’s not necessary a big chambers. For these cases, the best solution is the BENCHTOP CHAMBERS.

DYCOMETAL has developed one line dedicated to these chambers with 4 options of volume: 48, 80, 81 and 125 liters. These equipments have the features of the bigger chambers but in a reduced space.

CETM-40/48 is one example of this production line. The chamber comes with the cooling group placed in the top of the chamber or below the workspace.  The chamber can be manufactured with the same temperature range like the bigger chambers, -70ºC, -40ºC to +150ºC or 180ºC.

The voltage of the chamber could be 220/230 V or 380/400 (other voltage are available).

More information in www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers benchtop climatic chambers.

PRODUCT BULLETIN: AFA-200/125e, Forced Air Oven for Building Materials.

Building materials installed outdoors must withstand strong years climatic actions: rain, Sun, wind, ice, etc. In winter, are still experiencing large changes thermal in the cycle day/night. In summer, they are suffering the high temperatures and sun radiation. The building materials are investigated against the environmental aging in the laboratories to give the higher quality in the constructions. 

AFA-200/125e forced air oven, has been developed to simulate high temperatures in a concrete samples. The test requires of two equipment in order to test the extremes of the sample with different temperatures. The samples is placed in the lateral of the oven where is placed one portal to introduce inside of the workspace one of the extremes.  

More information in: www.dycometal.com 

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers forced air heating ovens to do this test

PRODUCT BULLETIN: CCK-50/979m, Climatic Chamber for Electronic Industry

The increasing demand of the market of electronic components has generated a more demanding test, and control system to reduce warranty costs, as well as ensuring a quality to the end user in a competitive market.

By this reason, one of the points key for checking of it quality are the  environmental tests, between which stand out, the climatic tests, for the verification of the resistance of the  electronic  systems against the temperature and the humidity.

CCK-45/979m is an example of this capacity production. The chamber has been designed with a big    workspace to test several samples at the same time (Walk-in chamber), but without losing the capacity to move the chamber easily.

More Information at: www.dycometal.com.

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for the electronic industry.

PRODUCT BULLETIN: CP-1000e, Dust Test Chamber for Automotive Industry

The dust tests are important test to guarantee the tightness of some elements like lights in the automotive industry. These tests are used to verify the protection degree of the samples against the solid agents, rating the resistance of the samples with a value from 1 to 6. The nomenclature will be IPXY, being the X the value of protection against dust. These values will give depending of the diameter of the particles used during the test.

CP-1000e complies with the standards EN 600529 (dust recirculation) and SAE J575 (blown).

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the dust test chamber..

PRODUCT BULLETIN: CCK-45/1296, Climatic Chamber with customized workspace

When the product to be tested has different dimensions, we find the difficult situation that these parts do not fall within the climatic chambers with standardized volumes. Is by this reason that DYCOMETAL, designs and manufactures chambers with different volumes of according to the needs of the customer... 

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the customized climatic chambers.

PRODUCT BULLETIN: CM-0/480, Humidity Test Chamber

In the automotive industry, the plastic parts, must of be conditioning to high temperatures and high humidity (80ºC and 80% RH) for have a stability dimensional and resistance to impact.

CM-AMB/480 has been developed to work under conditions of high humidity, and high room always. The psychometric measurement system, which has the chamber, allows you to maintain more demanding conditions of high humidity, so that there is no saturation in the detector.

Más información en: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for the automotive industry.

PRODUCT BULLETIN: CCK-0/2296m, Climatic Chamber for Gravel Impact Test

Trials of aircraft components require testing in extreme conditions and environmental conditions. the gravel test allows you to verify the glass resistance to the impact of a pebble of gravel, after having been conditioned.

The CCK-0/2296me, is a climatic chamber designed to condition the glass and after that period make the impact on the glass in an automated manner.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for the aeronautical industry.

PRODUCT BULLETIN: CCK-40/8g External Conditioning Unit

The external conditioning units have a workspace at distance. This workspace is custom made and depends of the needs of the pieces to be tested. The workspace can have different access  ports, communications elements, control options, etc. It adapts to the samples to be tested always.

CCK-40/8g, has been configured for samples with small dimensions, taking into account different ports in all the faces of the workspace to communicate with the test bench.

ore information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the external conditioning units.

PRODUCT BULLETIN: SSC-12930me, WALK-IN Salt Spary Chamber

All the markets: automotive, aeronautical, railway, paints or any type of metal treatment industry, have corrosion test simulation inside their quality standards. Sometimes, the samples to be tested are too big, so they need solutions with bigger volumes. In this case, we use the Walk-in Salt Spray Chambers.

SSC-12930me has been develop to introduce electrical components with high dimensions, like transforms.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers WALK-IN Salt Spray Chambers to carry out such tests.

PRODUCT BULLETIN: CCK-70/180/8 Stress Screening Chamber

The current environmental testing, increasingly have become more demanding in the gradients of temperature that will be submitted the piece. One of the most commonly used tests is currently the trial of accelerated stress or Stress Screening (ESS), during which the part to be tested is subjected to high gradients of cooling or warming.

CCK-70/180/8 has been developed, to perform tests of high gradient, 8 ° C/min, and cause fatigue or stress on automotive parts

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the Stress Screening Chambers. 

PRODUCT BULLETIN: AFA-300/490, Forced Air Heating OVEN for Alimentary Industry

For the process of toasting in the food sector, it is necessary for all grains are toasted evenly, so stability within the ovens must be very stable. This process often is not so homogeneous in ovens of continuous line, making it safe options are ranges of forced air circulation.

The AFA-300/490 has been developed under conditions of flow laminar and homogenous flow control of air, so that stability within range, both in space and in time, is high and the roasting process.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the forced air heating oven for the alimentary industry.

PRODUCT BULLETIN: CETM-40/1963m, Temperature Test Chamber for Aerospace Market

Before selecting a heat test Chamber, always it is important knowing the power that the product to be tested, will remove or dissipates when we are going to test it, since climate Chamber must compensate the energy dissipation during the test. Within the aerospace sector, electronic components tend to dissipate a lot of energy.

CETM-40/1963m chamber has been developed to compensate for the energy, emitted through the electronic items during the test, up to a maximum of 10 Kw.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the temperature test chambers for aerospace sector.

PRODUCT BULLETIN: CETM-60/1000g, External Conditioning Unit

The external conditioning equipment are used to prepare some samples in a test bench where geometry, the size of part or even the different elements that compose the Bank hinder the introduction of the Bank within a standard climatic chamber.

CETM-60/1000g is a system developed for different test bench, adapting his workspace to different options of communication with the elements to be tested.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Special Climatic Chambers for test bench to carry out such tests.

PRODUCT BULLETIN: CETM-10/1000, Temperature Test Chamber with Laminar Airflow to Electronic Components

The current demand in the electronics market has required a test and control system to minimize  'infant mortality' and reduce warranty costs. These climatic or thermal tests are one of the most demanded tests by the electronics industry.

The CETM-10/1000 thermal test Chamber, made the thermal fatigue testing at a stable temperature environment in space and time, due to the controlled air flow. Flow laminating Moreover ensures a tempering of the systems evenly without large temperature gradients, such as applying the main standards in electronics. 

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for the electronic industry.

PRODUCT BULLETIN: CCK-25/1600, Chamber for Cardboard and Paper Industry

Packs of cardboard or paper, throughout its useful life must withstand different environmental conditions, both temperature and humidity.

Within the quality controls, the packages will be located in a climatic chamber laying down a few different conditions of temperature and humidity, depending on the type of test (humidification, conditioning and cooling conditions), in order to verify that such packaging can withstand the most extreme conditions.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for the cardboard and paper industry.

PRODUCT BULLETIN: CM-0/105870m, Climatic Chamber For Stability Studies

Within pharmaceutical standards, Guidelines-ICH/FDA, establishes standards for general cases for storage of pharmaceutical samples in general cases.

There are 3 cases of general studies, long-lasting, average duration and accelerated where samples will be exposed to different environmental conditions of temperature and humidity, with a minimum period of time.

The chamber CM-0/105870m has been designed to carry out any of these three trials, under conditions of maximum stability.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for the pharmaceutical industry.

PRODUCT BULLETIN: CM2V-0/150, Chamber for Climatic Test in Alimentary Industry

Climatic tests have different sectors of application, one of them being the food industry. Within this sector food applications can be different: from dyes used in food to packages that are going to keep the product.

The Chamber CM2V-0/150, has been developed to reduce the space that two cameras would occupy in the lab having a vertical configuration for two workspaces that can work under separate conditions.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers for the alimentary industry.

PRODUCT BULLETIN: CETM-8074822m, Temperature Test Chamber for AEROSPACE

Climatic tests within the aerospace sector are the most demanding market, given that a satellite or a space shuttle parts shall be subjected to the most intense cold and extreme hot flashes.

Temperature testing Chambers, should be able to simulate the conditions to which will be subject the parts of aerospace components. CETM-80/4822m has been manufactured to work with only liquid nitrogen to give the most extreme temeprature change rates.

More information in: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers the climatic chambers