In our everyday life there are electronic components that do not suffer the extreme environmental conditions that others are subjected to. Components that surround us such as defibrillators, water meters, etc. Everyday elements that we can see in rooms where the environmental conditions will be moderate, which does not mean that they should not be subjected to climatic tests to verify their behaviour under different temperature and humidity conditions. Components of this type also have to be certified to work under ambient conditions.
Thus, our CCKMB-0/4715T has been developed to have a climatic chamber with positive temperature conditions (+20 ºC to +60 ºC) and a less extreme humidity control (50% to 90% hr) that allows environmental tests to be carried out on real conditions that the samples will face. Its vertical design allows samples to be easily and conveniently inserted into trolleys, allowing a large number of samples to be tested in parallel. The chamber has a double door for direct access to two interior work areas, so that, depending on the test time, the parts can be conveniently removed without disturbing the test conditions of the other parts. All tests can be recorded for later processing and reporting.
For more information, please
contact us by email: comercial@dycometal.com
or on our website: www.dycometal.com
.
DYCOMETAL, a
company with more than 40 years of experience in the development of simulation
chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.
