3 IN 1, PHARMACEUTICAL STABILITY MODULAR CHAMBERS, MODELS: CM-0/6760m and 2x CM-0/11050m

The space to locate new equipment is one of the elements to be taken into account for a correct configuration of the climatic chambers. If the building is old, the existing space for the equipment is reduced, or if the building is new, it is necessary to correctly plan the position of each piece of equipment to be installed in order to optimise the space as much as possible. To this end, the technical-commercial department of DYCOMETAL analyses the best possible solutions in order to optimise the existing space to the maximum and to be able to offer the client the best solution with the greatest possible volume.

For the configuration of the 3 chambers, CM-0/6760m and 2x CM-0/11050m,for pharmaceutical stability, the best possible configuration was analysed in detail, building the 3 chambers in a single structure so that the space occupied by the equipment could be reduced as much as possible. The high ceiling allows the products to be tested to be stored more vertically, thus facilitating a greater storage capacity in the existing space and under different stability conditions.

If you want more information, you can contact us through our email: comercial@dycometal.com   or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR PHARMACEUTICAL STABILITY TESTING.

TEMPERATURE TEST CHAMBER FOR AMMUNITION FIELD TESTS. MODEL, CCK-70/125

Within the quality control of armament ammunition, there are various types of environmental tests: thermal, climatic, solar radiation, corrosion, etc., with thermal tests being one of the most common. During these tests, the parts are subjected to both positive and negative temperatures, and this test has to be carried out both in the laboratory and in real field tests, where the sample is tempered before being used under the indicated conditions. In order to temper the samples, it must be possible to take the chamber to the field.

The thermal test chamber model CETM-70/125 has been developed to maintain a good ergonomics, positioning the control in the upper part of the chamber and the cooling group in the lower part, as well as vibration absorption systems for the transport of the equipment in a comfortable way in a lorry. In addition, the chamber has a temperature range from -70ºC to +150ºC, which allows it to cover all the thermal tests required by customers. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL CHAMBER FOR AMMUNITION TESTING.