Special Climatic Chamber for Test Bench

Climatic test reproduce the climatic conditions in temperature and humidity, to which the equipment or materials will be subjected during operation, transport or storage.

It’s necessary, do these tests in the validation plan of a new product or over its production, to evaluate equipment behavior, in its climatic use conditions, and prevent malfunctions in the market. Climatic chambers simulate humidity and temperature conditions that will affect to the product along its lifetime

Sometimes, it’s necessary to put the samples under a specific temperature and humidity conditions, during a test in a test bench. Introduce the test bench in a standard climatic chamber is complicated. For this reason, Dycometal manufactures an external conditioner system to obtain the necessary temperature and humidity conditions to do the test.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Special Climatic Chambers for test bench to carry out such tests.

Special Climatic Chamber to Aeronautical industry

Climatic test reproduce the climatic conditions in temperature and humidity, to which the equipment or materials will be subjected during operation, transport or storage.

It’s necessary, do these tests in the validation plan of a new product or over its production, to evaluate equipment behavior, in its climatic use conditions, and prevent malfunctions in the market. Climatic chambers simulate humidity and temperature conditions that will affect to the product along its lifetime

Sometimes, when the load conditions of the sample to be tested require of different solution like the traditional, it’s necessary redesign the chamber in order to adequate to the sample. In the case of the biggest aeronautical pieces, Dycometal has designed a special climatic chamber with vertical door aperture, for introduce the samples vertically.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Special Climatic Chambers to carry out such tests.

WALK-IN Salt Spray Chamber

One of the most important destructive agents of the nature is the corrosion, being one of the principals causes of economic lose.

All the markets: automotive, aeronautical, railway, paints or any type of metal treatment industry, have corrosion test simulation inside their quality standards. Sometimes, the samples to be tested are too big, so they need solutions with bigger volumes. In this case, we use the Walk-in Salt Spray Chambers.

The Salt Spray Corrosion Test consists of an accelerated corrosion attack by an artificial salt spray of a certain composition, in the exact conditions of temperature and pressure. To do this type of tests, it uses the salt spray chambers.

Standards like: ASTM B117, DIN 50 021 or DIN 50 017, establish a test parameters to simulate the most aggressive atmospheres.

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers WALK-IN Salt Spray Chambers to carry out such tests.

ASTM B117, Neutral Salt Spray Test NSS

ASTM B117 is used to test the corrosion resistance of metallic parts with or without coating; exposing the sample saline atmospheres and high temperature

The samples are introduced into the chamber with an acid atmosphere, pH between 6’5 to 7’2, and temperature of 35ºC. The collection rate must to be between a to 2 ml/hour. The collector will have a surface of 80 cm²  

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-SS, Neutral salt Spray Test

The DIN 50 021-SS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline acid saline atmospheres and high temperature

The samples are introduced into the chamber with an acid atmosphere, pH between 6’5 to 7’2, and temperature of 35ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 2 ml/hour. The collector will have a surface of 80 cm²

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-ESS, Acid Salt Spray Test

The DIN 50 021-ESS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline acid saline atmospheres and high temperature.

The samples are introduced into the chamber with an acid atmosphere, pH between 3’1 to 3’3, and temperature of 35ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 2 ml/hour. The collector will have a surface of 80 cm²  .

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.

DIN 50 021-CASS Copper-Acetic Salt Spray Test

The DIN 50 021-CASS standard is used to test the corrosion resistance of the coatings, exposing the samples to saline copper-acetic saline atmospheres and high temperature.

The samples are introduced into the chamber with an acid atmosphere, ph between 3’1 to 3’3, and temperature of 50ºC. The volume of the chamber will not be lower than 400 liters. The collection rate must to be between 1 to 2 ml/hour.   

DYCOMETAL, company with over 25 years experience in developing simulation chambers for environmental testing, offers customers Salt Spray Chambers to carry out such tests.