CETM-25/300T, THERMAL TEST CHAMBER FOR SEMICONDUCTOR TESTING.

To evaluate semiconductors, environmental tests are performed, analyzing the reliability and durability of chips under extreme temperature conditions by subjecting samples to controlled temperature variations. International standards such as IEC 60068 are among the most widely used to ensure the uniformity, reliability, and reproducibility of tests on electronic products.

These types of tests are carried out in climatic or thermal chambers so that the behavior of semiconductors under temperature changes can be studied.

The DYCOMETAL CETM-25/300T chamber allows for testing under controlled temperature. Its 300-liter volume allows for the processing of a large number of small samples. All of this is controlled by an advanced control system and remote control software.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK-40/1000T-3, CLIMATE CHAMBER FOR TESTING ELECTRONIC COMPONENTS IN THE AUTOMOTIVE INDUSTRY

 In the automotive sector, the quality and durability of interior components must be guaranteed even when the vehicle is exposed to extreme environmental conditions. Therefore, all elements located in the passenger compartment—such as trim, electronic modules, panels, plastics, or decorative elements—must undergo tests that reproduce the most severe climatic agents in order to evaluate their stability, resistance, and long-term performance. 

Among the most widely used procedures are the VW PV 1200 and VW PV 2005-A standards, which establish accelerated climate stress cycles designed to intensively simulate abrupt changes in temperature and humidity, as well as prolonged exposure to critical environments. These cycles include phases in which the water content in the air must be kept strictly limited, requiring very precise climate control to ensure the reproducibility and reliability of the test.

The DYCOMETAL CCK-40/1000T-3 is a climate testing chamber with a volume suitable for testing medium-sized parts. With a temperature range of -40°C to +150°C and relative humidity control between 10% and 98%, it allows for most automotive testing. All of this is controlled via a 7” touchscreen interface and associated logging software.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETMB-30/4570T, temperature test chamber for isothermal packaging

Maintaining the cold chain during transport is a critical factor in the design, development, and validation of isothermal packaging for shipping pharmaceuticals, biological samples, blood products, and other temperature-sensitive materials. Ensuring the thermal integrity of these products is essential to preserving their efficacy, stability, and safety until the time of use. Therefore, isothermal packaging systems must be carefully designed and subjected to rigorous verification and validation processes that guarantee their ability to maintain controlled and constant thermal conditions throughout the entire logistics cycle.

The DYCOMETAL CETMB-30/4570T chamber model has been designed to test isothermal packaging or bags under temperature conditions down to -25°C, complying with F-gas (GWP<150). The MODUBLOC design from DYCOMETAL allows the construction of large test chambers with the advantage of easy installation and the mobility of a smaller system.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-70/300T-5, temperature test chamber for the aerospace industry

 The aerospace economy is booming, and space is approaching a new frontier, creating solutions for major global challenges through constantly improving and expanding technological capabilities. The impact of space technology on our daily lives will be revolutionary, serving as a platform for progress and innovation. Within this field, electronics are fundamental to the production of the various components of satellites, vehicles, rockets, capsules, etc. Quality control of the different components that make up these systems is essential. For this purpose, climate testing is a fundamental element in verifying the behavior of these systems throughout their lifespan.

The DYCOMETAL CETM-70/300T-5 chamber is a medium-volume thermal test chamber that allows for testing aerospace components in a temperature range from -70ºC to +180ºC. Its temperature gradient of 5°C/min allows for moderate stress testing of samples, enabling verification of sample performance under extreme conditions. All of this is controlled by an advanced control system and remote control software.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK-30/300Tg, climatic chamber for carbonation and freeze-thaw tests for building materials

 Numerous environmental tests exist to verify the resistance of construction materials to different climatic conditions. One fairly common test is the freeze-thaw test, where the sample is exposed to freezing and thawing conditions (in air or water) to guarantee the material’s durability.

Other more specific tests for steel-reinforced materials include carbonation tests, which involve accelerated corrosion testing by injecting CO2 into the samples under controlled climatic conditions.

DYCOMETAL has designed the CCK-30/300Tg climatic chamber to perform both carbonation and freeze-thaw tests in a single system, allowing it to cover various tests on different construction materials, rather than focusing solely on a single test. This system also features an environmentally friendly refrigeration unit with a GWP < 150, all controlled by a 7” color touchscreen control system, as well as associated software for monitoring and recording the different tests.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

15 m³ climatic chamber for the agri-food sector

We recently supplied a climate stability chamber to a client in the agri-food sector for aging samples between +20 and +50°C with controlled humidity between 50 and 90% RH, and a dew point of 10 to 38°C. The chamber is constructed of high-quality stainless steel, with an access door featuring a window and interior lighting. It also includes high-strength stainless steel shelves. All functions are controlled by an advanced touchscreen controller, and, as a new feature, it includes a vertical totem with a large integrated status light, allowing users to easily see the chamber’s operating status.

In the agri-food sector, precise environmental conditions are key to ensuring quality, safety, and innovation. Climate chambers allow for the reproduction and control of variables, simulating real or extreme environments with complete reliability. From new product development to the study of food preservation and shelf life, these technological solutions drive research, quality control, and process optimization.

Consult our technical and sales department for advice on the most suitable solution for your application.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-0/100T-UV, thermal test chamber for accelerated aging tests with UV LED light

Exposure to UV light is responsible for various molecular and genetic changes in both materials and living cells. Sunlight reaching the Earth contains UV rays with different wavelengths: UV-A, UV-B, and UV-C, although the latter are blocked by the ozone layer.

Accelerated aging tests with UV LEDs are used in various markets, such as the pharmaceutical, cosmetic, photonics, and medical industries, to simulate an accelerated solar emission spectrum. This allows for the evaluation of the behavior and response of different types of materials to solar radiation.

Our CETM-0/100T-UV chamber has been designed and adapted to perform UV radiation tests in a thermally controlled environment for most UV applications: bonding, polymerization, drying, curing, and photolithography. The system features a 100-liter capacity test chamber made of polished stainless steel with an internal finish. The roof of the test chamber has an opening with a filter to allow for the placement of an external UV radiation source. All of this is controlled by a touchscreen control system and recording and control software.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Dycometal supplies 3 CCK-T-f units for mosquito breeding tests (entomology)

 In experimental entomology, reproducibility and environmental control are critical factors for obtaining reliable results.

Precision climate chambers enable the maintenance of stable temperature, relative humidity, and light intensity, key variables in the study of mosquito developmental biology, behavior, and physiology.

By allowing controlled simulation of photoperiods, microclimates, and thermal gradients, these chambers accurately recreate natural environments, enabling assessment of how environmental factors influence biological parameters such as larval development rate, longevity, fecundity, and vector competence.

This technological infrastructure is a fundamental tool for producing reproducible and comparable data across laboratories, supporting advances in the understanding of the ecology and epidemiology of mosquito-borne diseases such as dengue, Zika, and malaria.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Climatic chambers for compliance with MIL-STD 810 method 521.4 icing/freezing rain

Ice formation can be one of the causes that can hinder the performance and durability of a material. This formation can affect moving parts, increase risks to personnel, cause structural failure, and more. Method 521.4 of MIL-STD 810 is used to evaluate the effect of ice on materials and systems, simulating their performance during operation when exposed to ice formation from rain, drizzle, fog, splashes, or other sources.

The CCK-T series climatic test chambers can be modified to accommodate a system that allows for this test. Depending on the sample size, the CCK-T series offers different volumes as needed. All of this is controlled by an advanced microprocessor and remote control and recording software. If you’d like more information, please don’t hesitate to contact our technical and sales department so we can advise you on the most appropriate solution for your needs.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Climatic chamber with solar simulator for testing in accordance with MIL-STD method 505.7

Method 505.7 of MIL-STD 810 is used to evaluate material that may be exposed to solar radiation during its service life. This method evaluates the effects of direct exposure to sunlight and aims to determine the heating effects of solar radiation on the material and identify the photodegradation effects of exposure to solar radiation. Exposure to solar radiation can also cause expansion and contraction of materials, generating serious stresses and loss of structural integrity, among other defects.

DYCOMETAL’s CCK/CETM series climatic chambers can be modified to comply with test method 505.7 of MIL-STD 810, among other standards.

Please consult our technical-commercial department for comprehensive advice.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

MIL-STD810H method 524.1 freeze-thaw, CCK-T series climate chambers

The purpose of this freeze-thaw test method is to determine the material’s ability to withstand the effects of moisture phase changes between liquid and solid, in or on the material, as the ambient temperature passes through the freezing point and the effects of moisture induced by transfer from a cold to a warm environment or from a warm to a cold environment.

This method is applicable to materials that will be exposed to temperatures above the freezing point while wet or in the presence of moisture, to induce physical changes in the material and evaluate resistance to distortion or jamming of moving parts, failure of bonding materials, seals, etc.

This method establishes three test procedures: diurnal cycle effect, fogging, or rapid temperature change.

DYCOMETAL’s CCK-T climatic chambers are designed to accurately reproduce the most demanding environmental conditions in compliance with the requirements of MIL-STD-810H, method 524.1, guaranteeing the ability to simulate thermal cycles and environmental conditions according to the most rigorous military standards. This allows the behaviour and resistance of equipment to be verified in the face of extreme temperature variations, ensuring its performance and durability in any operating environment.

With CCK-Ts, laboratories and testing centres have a robust, accurate and compliant solution to ensure the quality and reliability of their products.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CV series, vertical freezers for testing in accordance with MIL-STD method 502.7 – low temperature

Low temperatures have adverse effects on almost all basic materials. As a result, exposing materials to low temperatures can temporarily or permanently affect their performance by altering the physical properties of their constituent materials. MIL-STD 810, in its method 502.7, establishes the test conditions for low temperatures in order to obtain data that helps evaluate the effects of low temperature conditions on the safety, integrity, and performance of the material during storage, operation, and handling of systems and components. This ensures the safety, integrity and performance of the material during storage, operation and handling for all materials that are exposed to a low-temperature environment during their life cycle.

DYCOMETAL upright freezer cabinets have temperature ranges down to -70ºC, with different volume capacities and internal dimensions. Manufactured from robust materials, they allow the most demanding tests to be carried out. All this is controlled by an advanced microprocessor and associated software for recording the tests on a computer.

In addition, we offer tailor-made solutions according to customer requirements. Please consult our technical-commercial department for comprehensive advice.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-70/1450T, chamber for thermal testing in accordance with MIL-STD-810 method 501.7

 One of the leading standards in environmental testing in the defence sector is MIL-STD 810, which covers the different environmental tests that samples must undergo to ensure their storage and operation throughout their useful life. This standard covers various test methods, and specifically, Method 501.7 is dedicated to high-temperature testing to evaluate the effects of high-temperature conditions on the safety, integrity and performance of the material, simulating conditions where temperatures (ambient or induced) are higher than standard ambient temperature. High temperatures can affect the performance of the material by modifying the physical properties or dimensions of the material or materials that compose it.

The DYCOMETAL climatic chamber, CETM-70/1450T, has been designed to comply with the tests indicated in this test method. The system has been adapted in volume to the customer’s needs. It has a reinforced floor for positioning the samples and two shelves for lighter samples. All of this is controlled by a 7″ touchscreen control panel with associated control and recording software on a PC.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CRT2V-70/540T, Thermal shock chamber for testing in accordance with MIL-STD 810 method 503.7

 Thermal shock chambers are essential for testing the thermal fatigue of samples, simulating sudden changes from cold to hot temperatures in a very short period of time in order to evaluate resistance, weak points and possible subsequent failures during use. Method 503.7 of the MIL-STD 810 standard establishes the environmental conditions necessary to perform this thermal shock test according to the type of sample to be tested.

The CRT2V-70/540T chamber has been developed to comply with the MIL-STD standard according to method 503.7. With a useful basket capacity of 540 litres, it allows for the testing of both small and medium-sized parts, performing the shock between -70ºC and +250ºC in less than 10 seconds.

At DYCOMETAL, we offer tailor-made solutions designed to meet the specific needs of each sector.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Environmental testing for UAS (drones) with DYCOMETAL climate chambers

The use of unmanned aerial systems (UAS), commonly known as drones, has grown exponentially in sectors as diverse as industrial inspection, precision agriculture, logistics and emergency management. This equipment must operate with complete reliability in highly varied and, in many cases, extreme weather conditions.

To ensure the safety and performance of UAS in real environments, it is essential to subject them to controlled environmental testing capable of faithfully reproducing the adverse weather conditions they will encounter in operation.

DYCOMETAL climatic and environmental simulation chambers allow the behaviour of drones and their components to be evaluated in relation to various critical factors:
– Extreme temperature testing
– Humidity and condensation testing
– Thermal cycles and thermal shocks
– Combined testing

The integration of environmental testing into the drone development and validation process not only improves technical reliability, but also increases user and operator confidence.

At DYCOMETAL, we offer the industry our experience and technology in climatic chambers and environmental simulation equipment, providing solutions tailored to the needs of each project.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.