AFA-150/11300, WALK-IN FORCED AIR HEATING OVEN

With a volume of 11,300 litres, the oven has a large volumetric capacity to condition a large number of samples in parallel. The internal dimensions: 1850 x 1700 x 3600 mm, also allow for the positioning of very tall samples. The oven has been configured with a heating gradient of 3°C/min, taking into account a full oven: 400 kg of metal, 100 kg of plastic and 20 kg of glass. A total of 520 kg, which means that the floor has been reinforced to withstand this mass. All parameters have been adjusted so that the oven has a maximum uncertainty of +/- 2 ºC, after ENAC calibration.

The oven has also been configured with two access doors, front and rear, for easier sample handling. For viewing the interior, the oven has an observation window in each door, with interior lighting. The doors have been painted in the customer’s corporate colour.

The oven has a 120 mm wall pass-through, so that probes or cables can be inserted if the customer needs them.

The interior is made of stainless steel, with rails and hooks at the top for hanging the parts to be tested.

The control by means of programming allows temperature cycles to be carried out and, thanks to the remote control and recording programme, all the test data can be stored so that reports can be made at a later date. Communication is via TCP/IP port. In addition, the system has a weekly time programmer for start-up according to the calendar.

An additional safety thermostat will ensure that the samples are not damaged (safety thermostat on sample).

The oven can be positioned in any location thanks to its wheels for easy movement.

An oven developed for the customer’s needs.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

AFA-300/80, FORCED AIR HEATING OVEN FOR AEROSPACE INDUSTRY

The aerospace industry has one of the most demanding set of tests in the market, as the materials that will be used during the development of any item or material destined to travel in space will be subjected to the most stringent environmental conditions during their use. This means that tests on existing or new materials must be extremely demanding, such as tests on extreme temperatures.

The AFA-300/80 is a forced air heating oven designed to perform high temperature tests on materials for more than 18 hours each day to demonstrate their durability at high temperatures. The control system is based on a simple regulator to set the desired working point, and the external control and recording software allows to record the test data in order to be able to make a report later on.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-70/3480T-5, SPECIAL TEMPERATURE TEST CHAMBER FOR STEERING COLUMNS

 When we talk about test benches combined with a climatic chamber, we are talking about special solutions, solutions that allow the introduction of several test benches inside the chamber and taking into account all the parameters required by the customer. For the steering columns, gradients, masses, materials, etc. have to be taken into account in order to have a chamber that meets the real expectations of the customer. An important mass will be introduced into the equipment, since the steering columns will be fixed on support tables where they will be tested.

The thermal test chamber, CETM-70/3480T-5 has been completely designed for the customer. Since the customer was going to test complete benches, the floor has been reinforced for 500 kg, including a special insulation to avoid loss of transmissions through the floor of the chamber itself. The chamber has 4 double doors to allow access from both sides of the chamber to the test benches and to be able to work in total comfort. The 10″ HMI has a menu in the customer’s language, allowing a clear display of the test values. The access ports are located in the ceiling of the chamber, with a diameter of 200 mm, which is large enough to allow large hoses or cables to pass through.

But the outer construction of the chamber is not the only thing that is custom-made. The cooling unit has been designed to be able to carry out load tests between -40ºC and +120ºC, taking into account the mass and a heating and cooling speed of 5 K/min.

An equipment completely designed according to the customer’s specifications.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CP-442e, DUST TEST CHAMBER, SPECIAL DESIGN

The standard IEC-60529 for degrees of protection against access to against solid foreign objects, dust tests (IP code), establishes that when carrying out the test it must be taken into account that the sample must be placed inside the chamber with enough space to allow the movement of the dust around the sample during the test, but of course, not all samples are the same, nor do they have the same size and weight. That is why from Dycometal we offer custom designed chambers, chambers that have an interior volume suitable for the different sample sizes that the customer will have.

Like the CP-442e, a chamber configured to comply with the IEC-60529 standard (IP5X or IP6X grade), with interior measurements designed with the customer for their samples.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CETM-70/2000T-1P, THERMAL TEMPERATURE TEST CHAMBER FOR DEFENCE INDUSTRY

Within the standard chamber designs, we have a large volume chamber with a large depth that allows large samples to be placed horizontally, thanks to its 2000 mm depth. This chamber has already been previously supplied to our client who has requested another similar model to carry out his temperature tests within the defence industry.

Our thermal test chamber model CETM-70/2000T-1P has an interior volume of 1000 x 1000 x 2000 mm (H x W x D), which, thanks to its double reinforced tray and its reinforced floor, allows testing large masses of samples, as well as long pieces. Its advanced control based on a touch screen allows easy access to the different menus, as well as the possibility of remote programming thanks to the software supplied with the equipment.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

BTI-450e, WATER THERMOSTATIC BATH FOR BUILDING MATERIALS

 All the materials that surround us must pass strict quality controls based on environmental tests, although at first glance we may not realize it. Such as construction materials. Did you know that concrete has strict conditions for its conservation? This test consists of storing the concrete specimens in water at a temperature of +20 ºC. This entails a high-volume, temperature-controlled bath to store the largest number of test tubes. And cooling/heating a bath with a volume of 450 liters of water requires an important technical system.

Our BTI-450e thermostic bath has been designed according to the customer’s needs. Based on a robust design with an AISI316 stainless steel interior, which allows it to withstand the test conditions over time. The exterior is made of painted AISI304 stainless steel for greater durability. To be able to place the samples, 6 independent holes are made with interior baskets for better extraction. Each basket with a capacity of 35 samples. The microprocessor-based control allows precise control of the working temperature of the bath, placing it at +20 ºC, for homogeneous sample conservation.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CMMB-0/2949, MOBILE STABILITY CLIMATIC TEST CHAMBER FOR PHARMA

 The chambers intended for pharmaceutical stability tests for large batches, usually have large volumes and dimensions, being manufactured in insulating panels, but when you want to change the location of the chambers problems can arise, you have to disassemble them panel by panel and reinstall them in the new location, which sometimes involves logistical problems.

At Dycometal, we have developed the concept of a climatic chamber manufactured in a large volume panel, which we call Modubloc. This chamber is based on a modular construction of insulating panel built on a structure to give mobility to the chamber, so that the transfer of the chamber to a new location can be done easily by means of transport elements. For example, our model CMMB-0/2949, a medium-volume chamber with a large storage capacity. The cooling unit is integrated into the structure for the joint movement of the whole system, and allows the joint movement in a simple way without the need of pulling new pipes. The system has a double door for easy access to the samples, and inside there are height adjustable shelves for maximum storage capacity. A tailor-made and portable solution.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

AFA-100/15g, EXTERNAL THERMAL GENERATOR FOR DEFENCE INDUSTRY

 When testing in the defence industry, caution must sometimes be exercised when carrying out tests, given that explosive equipment is handled. For example, when carrying out thermal tests, the samples are placed inside a reinforced bunker to avoid any type of incident.

This must be taken into account when manufacturing defence equipment, such as our external temperature generator model AFA-100/15g, a system designed to remotely condition samples at risk of explosion. For this purpose, the system is designed to remotely temper samples thanks to its insulated hoses. The system is also equipped with additional safety equipment to minimise any risk.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CM-0/250 ICH, BENCHTOP CLIMATIC CHAMBER FOR STABILITY TESTS

 Introducing the New Climate Chamber CM-0/250ICH: Innovation and Reproducibility for Your Laboratory

We are pleased to announce the launch of our latest innovation, the CM-0/250ICH climate chamber. Designed to meet the demanding needs of modern laboratories, this chamber combines durability, precision, and reproducibility in a compact, high-performance unit.

Key Features

– Stainless Steel Construction: Both the exterior and interior of the CM-0/250ICH are made of stainless steel, ensuring exceptional durability and a long service life, even under intensive use.

– ICH Guidelines Compliance: Ideal for pharmaceutical stability testing, this chamber complies with the International Council for Harmonisation (ICH) guidelines, ensuring reliable and consistent results.

– 21 CFR Part 11 Compliance: With the option to comply with FDA 21 CFR Part 11 regulations, the CM-0/250ICH offers secure control and complete data traceability, essential for pharmaceutical applications.

– Simple Control: The CM-0/250ICH is equipped with an intuitive control system that makes daily operation easy. Its user-friendly interface allows for quick and precise adjustments of climatic conditions.

– Large Capacity in a Small Footprint: Despite its large internal capacity, the chamber takes up very little space in the laboratory. It is the perfect solution for labs needing to maximize space without sacrificing functionality.

Ideal for Laboratories with Limited Space

We understand that space is a valuable resource in any laboratory. That is why the CM-0/250ICH has been designed with space optimization in mind. Its compact size does not compromise its capacity or performance, allowing your team to conduct tests and analyses comfortably.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Forced Air Oven DYCOMETAL AFA-400/80

 Precision and Efficiency for Your Thermal Treatment Needs

We are excited to introduce the DYCOMETAL AFA-400/80 forced air oven, an advanced solution designed to meet the most demanding needs in material thermal treatment. With a temperature range reaching up to +400ºC and an interior volume of 80 liters, this oven is ideal for a wide variety of industrial and laboratory applications.

Key Features

Temperature Range:

– Capable of reaching up to +400ºC, allowing for the thermal treatment of materials under extreme conditions.

Interior Volume:

– 80 liters of capacity, offering ample space to accommodate different types of samples and materials.

Simple Control:

– Intuitive user interface that facilitates the adjustment and monitoring of operating conditions.

Recording Software:

– Includes advanced recording software that allows efficient documentation and analysis of thermal processes, ensuring traceability and treatment quality.

Ethernet Communication Port:

– Equipped with an Ethernet communication port, facilitating integration with remote control and monitoring systems, improving connectivity and data management.

Main Applications

The AFA-400/80 forced air oven is ideal for the surface treatment of materials, allowing verification of their behavior at high temperatures. Whether in the metallurgical industry, materials research, or any other field requiring thermal precision, this oven provides the performance you need.

Why Choose DYCOMETAL?

DYCOMETAL stands out for its commitment to innovation and quality. Each piece of equipment is designed to deliver exceptional performance, backed by first-class customer service. The AFA-400/80 is no exception, representing a smart investment for those seeking excellence in thermal treatment.

Don’t wait any longer to take your processes to the next level. Contact us today for more information and discover how the DYCOMETAL AFA-400/80 forced air oven can transform your production and ensure high-quality results.

Raise Your Standards with DYCOMETAL!

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Discover the new CM-0/10275mT modular climate chamber for cardboard packaging testing

 We are excited to introduce our latest innovation in climate chambers: the CM-0/10275mT, custom-designed to meet the specific needs of your cardboard packaging tests.

– Exceptional capacity: With a capacity of 10,275 liters, our chamber offers the ideal space for conducting tests on large packaging.

– Temperature and humidity control range: Adjust the temperature from 0ºC to +50ºC and control humidity between 40% and 95%, ensuring optimal conditions for your tests.

– Advanced control system: Equipped with a 7” color HMI interface and an ethernet communication port, the CM-0/10275mT facilitates monitoring and data logging through PC software.

– Efficiency and sustainability: The chamber includes an air-cooled refrigeration unit with eco-friendly gas, installed on the top of the chamber, ensuring efficient and environmentally friendly operation.

This climate chamber is the perfect solution to guarantee the quality and durability of your cardboard packaging by subjecting it to the most demanding and realistic conditions.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

TENSILE CHAMBER WITH TEMPERATURE RANGE FROM -70 ºC UNTIL +300 ºC

 Discover the Revolution in Thermal Testing: CETM-70/263Tge Chamber

The material testing industry is about to experience a transformation with the introduction of our innovative thermal testing chamber, the CETM-70/263Tge model. Specifically designed to be integrated into a tensile testing machine, this chamber offers unprecedented temperature control, covering an impressive range from -70ºC to +300ºC.

Key Features of the CETM-70/263Tge Chamber

– Wide Temperature Range. The CETM-70/263Tge allows testing under extreme conditions, from the freezing -70ºC to the scorching +300ºC. This broad thermal range ensures the ability to simulate and analyze virtually any environmental condition, providing valuable and precise data for the development and improvement of materials.

– Space and Adaptability. With a volume of 263 liters, the chamber is perfectly sized to fit the space between the columns of the tensile testing machine. This not only maximizes the use of available space but also facilitates integration without significant modifications to the existing equipment.

– Innovative Feedthrough System. One of the most significant advancements of our CETM-70/263Tge chamber is its specially designed feedthrough system. This system allows the chamber to be removed without the need to disassemble anything in the tensile testing machine, saving time and effort, and minimizing the risk of damage during the installation and removal process.

– Precision Control with Advanced Microprocessor. The chamber is controlled by an advanced microprocessor, ensuring precise and stable temperature regulation. This cutting-edge technology allows programming and maintaining specific conditions with high accuracy, guaranteeing reliable and repeatable test results.

Versatile Applications Beyond the Tensile Testing Machine

Although the CETM-70/263Tge was initially developed for integration into tensile testing machines, its exceptional capabilities make it ideal for a variety of additional applications. Any industry requiring extreme temperature changes can benefit from this technology, including:

– Aerospace: Simulation of extreme conditions for testing materials and components.

– Automotive: Evaluation of parts under extreme temperatures to ensure their performance and durability.

– Electronics: Testing circuits and components under adverse thermal conditions.

– Scientific Research: Experiments requiring controlled and extreme temperature conditions.

Conclusion

The CETM-70/263Tge thermal testing chamber represents a significant advancement in the field of thermal and material testing. Its innovative design, extreme temperature capability, and ease of integration make it an indispensable tool for any laboratory or industry looking to improve the accuracy and efficiency of their thermal testing. Don’t miss the opportunity to incorporate this revolutionary technology into your testing processes and experience a new era of precision and control.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

SSC-1000 NG, SALT SPRAY CHAMBER FOR MIL-STD 810 TESTING

 Introducing the innovative SSC1000NG Salt Fog Chamber!

Designed to meet the stringent MIL-STD 810 standard, our SSC1000NG is the ultimate solution for accelerated corrosion testing. This chamber is specifically developed to handle large and heavy samples, ensuring precise and reliable results in every test.

Key Features:

– MIL-STD 810 Compliance: Meets the most demanding standards for corrosion testing.

– Large Capacity: Ideal for large and heavy samples without compromising the integrity of the test.

– Advanced Technology: Equipped with state-of-the-art control and monitoring systems to ensure uniformity and repeatability of tests.

– Robust Construction: Built with high-quality materials to withstand intensive laboratory environments and ensure long-lasting durability.

With the SSC1000NG, your laboratory will be equipped to tackle the most complex challenges in corrosion studies, providing critical data for the improvement and development of corrosion-resistant materials.

Discover today how the SSC1000NG Salt Fog Chamber can transform your corrosion testing! For more information and demonstrations, visit our website or contact us directly.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Introducing the 480-Liter Climatic Test Chamber: The Perfect Solution for Environmental Testing of Construction Materials!

In the construction industry, the durability and resilience of materials are essential to ensure the safety and longevity of any project. To guarantee that materials meet the highest quality standards, rigorous environmental testing is crucial. This is where our 480-liter climatic test chamber becomes your best ally!

Key Features:

– 480-Liter Capacity: Ample space to conduct multiple tests simultaneously, optimizing time and resources.
– Precise Temperature Control: Temperature range from 0°C to 100°C, ideal for simulating various climatic conditions and evaluating material performance in extreme situations.
– Advanced Humidity Control: With adjustable relative humidity from 20% to 98%, this chamber allows for accurate replication of both dry and humid environments.
– Easy Operation: Intuitive design that facilitates control and monitoring of test conditions. With recording capability to document each test in detail.
– Reinforced Trays for Triple Molds: Specifically designed to support the weight and volume of test molds, ensuring stability and uniformity in each test.
– Feedthroughs and Observation Window: Equipped with feedthroughs for inserting cables or probes without compromising the internal environment. Also features an observation window to monitor tests without opening the chamber.

Benefits:

– Reliability and Precision: Ensures consistent and accurate results in every test, helping to identify potential failures and improve material quality.
– Versatility: Suitable for a wide range of construction materials, from cements to advanced composites, adapting to the specific needs of your project.
– Efficiency: Optimizes the testing process, reducing test times and improving laboratory productivity.

Applications:

Our climatic test chamber is ideal for:

– Research and Development Laboratories: Where new formulations and materials need to be tested under controlled conditions.
– Quality Control in Factories: Ensuring products meet specifications before hitting the market.
– Educational Institutions and Training Centers: For conducting detailed studies and practical training in controlled environments.

Don’t leave anything to chance when it comes to the quality of your construction materials. With our 480-liter climatic test chamber, you’ll have the confidence that your products can withstand the most challenging conditions.

Contact Us Today!

For more information and to schedule a demonstration of our climatic test chamber, don’t hesitate to get in touch with us. We’re here to help you take your testing to the next level!

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

BTI-1518, THERMOSTATIZED IMMERSION BATH FOR CYCLIC TEMPERATURE TESTING OF TELECOMMUNICATION ELEMENTS

Environmental tests can be very diverse and can be performed in different environments depending on where the samples to be tested will be used, either in air or underwater in temperature controlled conditions. When tests are performed underwater instead of in air, temperature-controlled immersion baths are used, such as our BTI-1518 bath developed for testing fiber optic equipment and accessories.

The BTI-1518 thermostatized bath has a large volumetric capacity, 1518 liters, with dimensions of 600 x 2300 x 1100 mm (Height x Width x Depth), and allows temperature cycles between +10 ºC and +55 ºC, thanks to its heating and cooling system. Moreover, thanks to its robust construction, in addition to withstanding the weight and pressure of the water, it can test boxes weighing up to 100 kg. The advanced control system allows the test values to be recorded on an external computer for subsequent reporting.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

Introducing the CM-0/18689 Climate Chamber: Innovation in Pharmaceutical Stability Testing

 In the pharmaceutical industry, precision and reliability are crucial to ensure product quality and safety. We are proud to present the CM-0/18689 climate chamber, an advanced and customized solution for pharmaceutical stability testing.

Key Features:

– Spacious Capacity: With an 18 m³ capacity, this chamber provides ample space for storing and testing large volumes of pharmaceutical products.

– Versatile Temperature Range: Designed to operate within a temperature range from +10 ºC to +50 ºC, this chamber ensures products are maintained under optimal testing conditions.

– Precise Humidity Control: The humidity range from 20% to 90% RH allows the simulation of various environmental conditions to evaluate product stability in different scenarios.

Custom Design:

One of the most notable features of the CM-0/18689 model is its custom design. This chamber has been specifically created to fit the limited space available at the client’s facilities. This tailored approach not only maximizes space efficiency but also ensures perfect integration into the existing work environment without compromising functionality or accessibility.

Benefits for the Pharmaceutical Industry:

– Reliability and Precision: The CM-0/18689 provides exact control of climatic conditions, ensuring consistent and reliable results in stability testing.

– Space Optimization: Its custom design allows installation in limited spaces, optimizing the use of available area.

– Versatility in Testing: With broad temperature and humidity ranges, this chamber is ideal for a variety of tests, adapting to the specific needs of each pharmaceutical product.

In summary, the CM-0/18689 climate chamber is an essential tool for any pharmaceutical laboratory aiming to enhance the precision and efficiency of their stability tests. Its custom design and advanced capabilities make it an unparalleled choice for tackling the challenges of quality control in the pharmaceutical industry.
For more information and inquiries on how the CM-0/18689 climate chamber can benefit your company, please do not hesitate to contact us. We are here to help you achieve excellence in your testing and quality processes.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

THERMAL SHOCK CHAMBER OF 850 LITERS

Thermal shock chambers are a fundamental element for the realization of thermal fatigue in materials, equipment and automatisms. They are predominantly used in the following industries: aeronautics, automotive, military, electronics, telecommunications, space and in general in the materials research industry.

The cameras have been commonly used in the aeronautical and aerospace industry, where materials must withstand sudden temperature changes in a very short period of time, but its use has been implemented in other industries such as electronics, where studies of weak points and subsequent failures during use are performed, thus minimizing warranty costs.

The CRT2V-70/850T is an equipment designed according to the real needs of the customer, since the samples to be tested will have different sizes and volumes, as well as different test standards. Its inner volume of 900 x 700 x 1350 mm (H x W x D x D), allows to test pieces of great depth, according to IEC 60068-2-14 standard.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

AFA-200/1000, FORCED AIR HEATING OVEN FOR VEHICLE HEADLIGHTS

 In the realm of automotive engineering, precision and reliability are paramount at every stage of development and testing. That’s why we’re thrilled to introduce the AFA-200/1000 forced air circulation oven, an indispensable tool for automotive headlight testing.

With a generous 1000-liter capacity, the AFA-200/1000 provides ample and versatile space for a variety of tests. What does this mean for you? It means you can conduct thorough tests without worrying about space limitations, allowing for more precise and representative results.

But that’s not all. The AFA-200/1000 is engineered with the latest forced air circulation technology, ensuring uniform heat distribution throughout the interior space. This means that every part of your sample will be exposed to the same thermal conditions, resulting in more consistent and reliable tests.

Furthermore, with a temperature range from ambient +10°C to +200°C, the AFA-200/1000 enables you to simulate a wide range of ambient conditions, from cool to extremely hot temperatures. This allows you to evaluate the performance of car headlights in a variety of scenarios, ensuring they meet the most stringent standards of quality and safety.

In summary, the AFA-200/1000 forced air circulation oven is the perfect tool to take your car headlight tests to the next level. Don’t settle for less when it comes to precision and reliability. Contact us today for more information and discover how the AFA-200/1000 can benefit your automotive testing processes!

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CET-50/1440Tpe, EXTERNAL TEMPERATURE GENERATOR FOR VIBRATION SYSTEM

 Experience the Perfect Combination of Temperature and Vibration with DYCOMETAL!

Discover our latest breakthrough in testing technology!

CET-50/1440pTe Temperature Generator. At DYCOMETAL, we are proud to introduce our state-of-the-art temperature generator, the CET-50/1440pTe. This equipment represents the best in testing technology, designed to meet the most demanding needs of your industry.

Unmatched Power and Versatility. The CET-50/1440pTe generator is capable of handling a wide variety of workloads, from small laboratory tests to large-scale industrial applications. Whether you need to simulate extreme conditions or perform endurance testing, this generator is up to the challenge.

Accurate Temperature over a Wide Range. One of the outstanding features of our generator is its ability to reach temperatures up to +150 °C. This wide temperature range allows you to recreate realistic conditions for your tests, from extremely cold to high-temperature environments.

Seamless Integration with Vibration Systems. The CET-50/1440pTe has been specially designed to integrate seamlessly with vibration systems. This allows you to perform combined temperature and vibration tests accurately and efficiently, saving time and resources in the process.

Intuitive and Easy-to-Use Interface. Our temperature generator features an intuitive interface that makes setting up and controlling your tests simple and straightforward. With advanced programming options and an easy-to-understand display, you can start your tests quickly and get accurate results.

Optimize your tests with precision and efficiency!

For more information, contact us today.

DYCOMETAL – Your High Performance Testing Partner

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.