CLIMATE TEST CHAMBER FOR SPORTS TRAINING, CCKm

The different climatic conditions of the Earth are a great condition for sports activity. From the humid heat of the tropical conditions, to the dry heat and extreme temperatures of the deserts, passing through the conditions of low concentration of oxygen at levels above sea level.

In order to prepare for such adverse climatic conditions, the specialized centers have simulation chambers, where the conditions to which the athletes will face can be simulated in order to achieve a better adaptation to the environment.

The climatic chambers of the CCKm series allow the simulation of these conditions through an environment that controls humidity, temperature, wind speed, solar radiation, etc. Thanks to its flexible configuration, they allow adapting to the available space, as well as the configurations that the client needs.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

PRODUCT BULLETIN: CCK-25/6800, Climatic Chamber for tests of ETICS acc. With ETAG.004)

A system of thermal insulation (ETICS) is a constructive solution of several materials to isolate the facade of buildings both acoustically and thermally from the outside. This insulation must be constructed in accordance with European technical evaluation specifications, which guarantee that the product can be used once its performance has been verified.

This set of materials should be constructed and tested according to a guide, ETAG 004, which establishes a series of tests to verify their reliability, among which are the tests of hygrothermal behaviour to determine the specification of the product to be analysed, which They will perform in a climatic chamber.

The climatic chamber CCK-25/6800 is prepared to perform the Hygrothermal behavior tests, where the ETICS will undergo different heating / rain and heating / cooling cycles. The chamber has the option to perform the test on one or two ETICS at the same time, with the measurements as indicated in the test guide.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Climatic Test Chambers for of EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) WITH RENDERING.

PRODUCT BULLETIN: CP-2500, Dust Test Chamber for Airbags

The airbags, are one of the most important safety elements within the automotive sector, thanks to them many lives are saved. But to arrive at a product that guarantees the safety of the driver, this equipment must be subjected to the strictest environmental tests. One of these tests to be carried out is the dust resistance, where it will be ensured that the airbags have an adequate sealing against the entry to the dust particles, degree of IP protection.

The thermal test chamber, CP-2500e, has enough space to carry out the leak test for several airbags at the same time in parallel. The chamber is configurable in its parameters to be able to modify the control according to the regulations to be tested. The chamber is prepared for various tests from different manufacturers, so that a single chamber can be used by multiple manufacturers.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers DUST TEST CHAMBER FOR AIRBAGS to do these tests.

PRODUCT BULLETIN: CETM-40/2200e, Temperature Test Chamber for Steering Wheels

Environmental tests allow the simulation of different components of a vehicle at different temperatures. For vehicle horn, these tests must be performed under the strictest tests of durability over time, where a mechanical part simulates the pressure that a hand would perform during a long period of time in some few days. The thermal test chamber will be responsible for simulating the temperatures that the horn will suffer both in cold and in heat, even in the most extreme conditions. The chamber should be integrated with the test bench both mechanically (design) and in software so that the operation of both elements together.

The thermal test chamber, CETM-40/2200e is prepared to condition 3 steering wheels with the mechanical elements at the same time. It has 3 independent shelves to be able to extract each steering wheel individually in a comfortable, fast and simple way. Its cold group is located on a separate bench, to minimize the heat and noise emitted by it. Its control will communicate with the control of the mechanical actuator to be able to coordinate both controls in a synergistic manner.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers TEMPERATURE CHAMBER FOR STEERING WHEEL to do these tests.

PRODUCT BULLETIN: THERMAL SHOCK CHAMBER AIR TO LIQUID, CRT2VT-25

The AIR to LIQUID thermal shock chamber subjects the test samples to greater stress. The chamber has a double compartment, in the upper zone the air is conditioned at a certain temperature and in the lower area there is a thermostated bath of controlled temperature, between + 2ºC and + 5ºC. The pieces will move through a basket between both compartments suffering the stress process, simulating splash conditions, dives, etc. The sample will move between both compartments to verify that it does not suffer any fracture, crack or apparent damage.

The thermal shock chamber, CRT2VT-25 has been designed for the production process (R&D), so that the most extreme conditions that the samples can supported are analysed. The samples will be tested in the hot zone and go down to the water bath, if the sample doesn’t suffer any damage, then the temperature of the heating zone will be increased and repeat again the operation until the samples suffer a damage.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com 

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers thermal shock chambers air to liquid.

PRODUCT BULLETIN; CET/AFA-0/100/174, DOUBLE TEMPERATURE TEST CHAMBER (CHAMBER + OVEN)

All objects that surround us must be tested under environmental conditions of temperature or humidity, to ensure reliability in storage, transport or operation. More; in sensitive elements such as weapons ammunition, which must be tested both in the laboratory and in the field, to ensure that it does not suffer deterioration under the most extreme environmental conditions.

The temperature test chamber, CET/AFA-0/100/174 is a chamber that allows conditioning the samples in the field or in the laboratory without distinction. Its compact design occupies little space and facilitates the transport of equipment to the field inside a truck or van. Its interior space, is optimized to the maximum to condition the largest number of samples.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers chamber for conditioning of ammunition.

VIDEO, CRT2VT-25 THERMAL SHOCK AIR TO LIQUID

Thermal shock chambers AIR to LIQUID simulate in a more real way, the stress that the samples can withstand under real conditions. The upper chamber simulates the conditions of maximum temperature at which the samples are found, while the lower chamber has a thermostatted bath, conditioned at a temperature between + 2ºC to + 5ºC (depending on the test), so that it can simulate the conditions of splashes that may occur during the useful life of the sample to be tested.

The sample will move between both test compartment to verify that it does not suffer any fracture, crack or apparent damage.