CLIMATIC TEST CHAMBER COMBINED WITH HYDRAULIC TEST BENCH , MODEL: CCK-40/3600e 2P

In a vehicle there are different components that suffer wear due to the continuous movement to which they are subjected over time. This type of components must be tested in the quality laboratory beforehand for a certain number of hours, so that its correct operation can be guaranteed throughout its useful life. In addition, they must be subjected to the changes in temperature and humidity that they will suffer, so the piece and the test bench must be introduced into a climatic chamber that simulates the temperature and humidity conditions.

The CCK-40/3600e 2P chamber has been designed in accordance with customer specifications to be able to introduce the different elements of the hydraulic test bench through the front wall, to simulate temperature and humidity conditions. The different front access-ports allow the actuators to pass, and the double door on the sides allows greater ergonomics of access to each element inside the chamber.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Climatic test chamber combined with hydraulic test bench.

TEMPERATURE TEST CHAMBER FOR STARTER MOTORS, MODEL: CETM-70/490e 2P

The starter motors of a vehicle are one of the most important components. It is necessary to perform its validation under the most extreme temperature conditions, to verify that they work correctly under the worst situations. For this, a test bench is developed where the starter motor must be subjected to different extreme temperatures, both in positive and negative temperatures, to verify the correct functioning of the equipment. These types of tests will be carried out in climatic chambers or thermal test. In the same test bench several starter motors will be tested in parallel, to take advantage of the space of the chamber, taking into account the energy that will be generated inside the chamber and that will have to be dissipated.

The thermal test chamber, CETM-70/490e 2P is a chamber developed to combine with the customer's test bench, with different ports positioned at a specified position on both sides of the chamber. The cold group of the chamber has been calculated to dissipate the energy generated by the starter during the test, complying with the profile indicated by the customer. The chamber control system allows communicating with the control of the test bench so that there is synchronization between them.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Thermal test chamber for starter motor parts.

WALK-IN SALT SPRAY CHAMBER, Model: SSC-7730m

The salt spray chambers allow evaluating the behaviour of materials and coatings against corrosion. It is not a simulation test, but a quality study test against a humid atmosphere with a specific concentration of NaCl. When the pieces are too large or too heavy for a standard salt spray chamber, the best option is a large-volume salt spray or walk-in chamber, which will allow the samples to be entered comfortably.

The SSC-7730m Walk-in Salt Spray Chamber has been designed for large part sizes and weight. The special plastic coating that presents the interior of the chamber, allows protecting the chamber from the corrosive agents that will be generated during the test. The door allows the passage of the pieces inside the chamber without any difficulty of access to the interior of the chamber. In addition, the roof of the chamber is made at an angle so that water droplets do not fall on the sample, according to the norm. Several salt spray nozzles are positioned on the sides of the chamber so that the salt spray is evenly distributed inside the chamber .

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com 

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers CÁMARAS DE NIEBLA SALINA WALK-IN.

TEMPERATURE DRIVE-IN TEST CHAMBER , MODEL. CETM-25/78290m,

DRIVE-IN chambers are modular climatic chambers, prepared to test under controlled climatic conditions a complete vehicle. The importance of these chambers is to compensate the energy released by the engines, mainly when they start, that is, cold start. In addition, these types of chambers must be prepared to evacuate the gases generated by combustion engines.

The climatic chamber CCK-25/78290m has been designed to dissipate up to 12 Kw of energy generated by the engine at -25ºC. Its design has been configured with the customer depending on the space available and how he wanted to introduce the vehicles, having two double-leaf doors on the front and rear of the chamber, entering the vehicle on one side and leaving on the side opposite. It also has a service door that allows technical staff access to the test area. In addition to having a remote communication to a general control cabin..

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers DRIVE-IN TEST CHAMBERS.

CLIMATE TEST CHAMBER FOR SPORTS TRAINING, CCKm

The different climatic conditions of the Earth are a great condition for sports activity. From the humid heat of the tropical conditions, to the dry heat and extreme temperatures of the deserts, passing through the conditions of low concentration of oxygen at levels above sea level.

In order to prepare for such adverse climatic conditions, the specialized centers have simulation chambers, where the conditions to which the athletes will face can be simulated in order to achieve a better adaptation to the environment.

The climatic chambers of the CCKm series allow the simulation of these conditions through an environment that controls humidity, temperature, wind speed, solar radiation, etc. Thanks to its flexible configuration, they allow adapting to the available space, as well as the configurations that the client needs.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

PRODUCT BULLETIN: CCK-25/6800, Climatic Chamber for tests of ETICS acc. With ETAG.004)

A system of thermal insulation (ETICS) is a constructive solution of several materials to isolate the facade of buildings both acoustically and thermally from the outside. This insulation must be constructed in accordance with European technical evaluation specifications, which guarantee that the product can be used once its performance has been verified.

This set of materials should be constructed and tested according to a guide, ETAG 004, which establishes a series of tests to verify their reliability, among which are the tests of hygrothermal behaviour to determine the specification of the product to be analysed, which They will perform in a climatic chamber.

The climatic chamber CCK-25/6800 is prepared to perform the Hygrothermal behavior tests, where the ETICS will undergo different heating / rain and heating / cooling cycles. The chamber has the option to perform the test on one or two ETICS at the same time, with the measurements as indicated in the test guide.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers Climatic Test Chambers for of EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) WITH RENDERING.

PRODUCT BULLETIN: CP-2500, Dust Test Chamber for Airbags

The airbags, are one of the most important safety elements within the automotive sector, thanks to them many lives are saved. But to arrive at a product that guarantees the safety of the driver, this equipment must be subjected to the strictest environmental tests. One of these tests to be carried out is the dust resistance, where it will be ensured that the airbags have an adequate sealing against the entry to the dust particles, degree of IP protection.

The thermal test chamber, CP-2500e, has enough space to carry out the leak test for several airbags at the same time in parallel. The chamber is configurable in its parameters to be able to modify the control according to the regulations to be tested. The chamber is prepared for various tests from different manufacturers, so that a single chamber can be used by multiple manufacturers.

If you want more information, please contact us in comercial@dycometal.com or in our website: www.dycometal.com

DYCOMETAL, company with over 25 years of experience in the development of Chambers for environmental testing simulation, offers its customers DUST TEST CHAMBER FOR AIRBAGS to do these tests.