AIR TO LIQUID THERMAL SHOCK CHAMBER ACC. WITH VW 8000 AND RENAULT 34-09-020, MODEL: CRT2V-166e

The standards VW 80000, Section K-13 "THERMAL SHOCK IMMERSION" and RENAULT 34-09-020 "AIR-LIQUID THERMAL SHOCKS", are specifically developed for electrical and electronic components, which are mounted below the wading level of the vehicle. Both standards serve to ensure the functionality in case of immediate cooling by temporary immersion of the component. The test shall consist of a homogeneous heating of the part, followed by immersion in salt water at a given concentration for a given time, with complete immersion of the specimen. After this cycle, it shall be analysed if the component has suffered any damage or if water has entered inside.

The CRT2VT-166e thermal shock chamber has not only been developed to meet all the requirements of the above test, but has also been designed to perform more stringent tests on the temperature of the immersion water and the salt water concentration, according to the customer's requirements.  Likewise, the chamber has been built in different parts, adapting to the space that the client had for it.

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL SHOCK AIR TO LIQUID CHAMBERS to perform such tests.

TEMPERATURE TEST CHAMBER FOR HEAVY SAMPLES IN ELECTRONICS, MODEL: CETM-25/1296e

The electronic samples can be small microchips or large iron blocks, but the size does not matter, as they have to be tested in sub-zero and above-zero temperature conditions to verify their thermal resistance, whether they are small samples or large, heavy samples.

The design of the thermal test chamber CETM-25/1296e is based on the premise of being able to test large heavy specimens up to 750 kg. Its horizontal design allows the specimens to be loaded by means of a bridge crane, with a door large enough for the specimens to be placed safely. Its ergonomic design allows the chamber to be controlled from the side of the chamber, and the front wall pass-throughs allow access to the customer's own sampling probes to be positioned on the sample. 

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com.

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the TERMPERATURE TEST CHAMBER FOR HEAVY SAMPLES to perform such tests.

THERMAL SHOCK CHAMBER WITH SPECIAL DESIGN ADAPTED TO THE CUSTOMER'S SPACE, MODEL: CRT2V-70/165e

Sometimes, customers have limited space for the installation of standard equipment and modifications have to be made to the chambers in order to adapt them to the customer's existing space. At DYCOMETAL we are aware of these limitations, and our commercial policy is to make flexible chambers adapted to each customer's needs. Through our commercial and engineering department, we analyse the different possible solutions to modify our products and provide the best solution for our customers.

The thermal shock chamber  CRT2V-70/166e adapts perfectly to the space available for it. Designed with the cooling unit externally and positioned at a distance, reducing the need for space in the laboratory itself, but meeting the customer's needs in terms of recovery gradients. Likewise, the chamber is controlled by means of a retractable arm to reduce the space it occupies in the room to a minimum.

A solution adapted to the customer's space.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CUSTOMIZED THERMAL SHOCK CHAMBERS to perform such tests.

EXTERNAL TEMPERATURE CONDITIONING UNIT FOR AUTOMOTIVE TESTING, MODEL: CETM-60/250g NG

Within the automotive sector, there are many vehicle parts with different sizes or that must be tested on dynamic test benches, which makes it difficult to test these parts in a standard climatic chamber. At DYCOMETAL we have been manufacturing external thermal or climatic conditioning systems (generator), in order to be able to test all types of components.

The CETM-60/250g NG thermal generator has been specifically configured under the customer's test conditions. Its heating and cooling performance is designed to meet the most stringent test conditions specified. In addition, its temperature stability and temperature uniformity recovery times were reduced to meet the customer's testing needs. Its mobile and adaptive design allows for the testing of small parts, large volume parts and dynamic test rigs.

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the EXTERNAL ENVIRONMENTAL CONDITIONING UNITS (generators) for realize these tests.

FORCED AIR OVEN DESIGNED FOR TENSILE TESTS, MODEL: AFA-200/54e

New materials are the order of the day. Stronger, more environmentally friendly and affordable materials are the short-term future. These new materials must pass a series of tests in order to be characterised, one of these processes being tensile tests and their resistance to temperature.

The AFA-200/54e chamber has been specially configured for the working space of a given testing machine, taking into account the space between columns and the customer's interior dimensions. In addition, the AFA-200/54e has been equipped with different elements for visual studies using both visible and infrared spectrum cameras.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the FORCED AIR HEATING OVEN FOR TENSILE TESTS IN NEW MATERIALS.

CLIMATIC CHAMBER FOR THERMAL INSULATION TESTS, MODEL: CCK-25/6800

 The European guide EAD-040287-00-0404, establishes the bases for the construction and testing of thermal insulation systems, indicating a series of tests to verify their reliability, among which are the hygrothermal behavior tests, which must be carried out in a climatic chamber.

The CCK-25/6800 climatic chamber model has been designed and built in a robust way to guarantee maximum durability over time against these heating/rain and heating/cooling cycles. The CCK-25/6800 will allow one or two ETICs to be tested in parallel.

If you want more information you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBER FOR BUILDING WALLS TESTING.

RENEWAL PLAN - Renew your Climatic Test Chamber

 

RENEWAL PLAN - Renew your Test Chamber and Save up to 20%.

Now you have the opportunity to renew your old climatic chamber or to replace your limited performance model with the new more advanced CCK-T series chambers, from DYCOMETAL EQUIPOS DE C.C., S.L., which include the latest features in technology.

If you renew your old climate chamber, whatever the model or brand, you will benefit from a discount of up to 20%* off the price of your new DYCOMETAL chamber, CCK-T SERIES.

- Temperature ranges from -70 ºC to +180 ºC

- Humidity range from 10 % to 98 % R.H.

- New design, with aesthetic details. 

- HMI (Human Machine Interface) with colour touch screen. 

- Graphic recorder.

- Innovative air circulation system that improves the homogeneity and the treatment of the samples.

- New rounded interior finishes, without seams or screws.

- Electronic door lock.

- Air or water condensation system. 

 

DYCOMETAL has always been at the forefront of the design of climatic chambers, its range of products brings innovations with the aim of satisfying the user, combining performance with technical excellence.

From DYCOMETAL, the solution goes from the supply of the equipment, to the study of viability of the installation, starting up, maintenance and support in the operation.

Please also consult our special designs, developed exclusively for specific tests.

For further information, please contact us through our e-mail: www.dycometal.com or in our web page: comercial@dycometal.com .  

*Check with our sales department for the discount associated with your chamber