STABILITY CLIMATIC TEST CHAMBER FOR PHARMACEUTICAL INDUSTRY. MODEL, CM-0/4954mT

Often, the space for a climatic chamber is limited and our technical department has to analyse and study the options for the installation of a climatic chamber. This is the case of the climatic chamber model CM-0/4954mT.

In this case, the client had very limited space for the installation of the chamber, so we had to analyse the most suitable options to meet the client's requirements and adjust as much as possible to the useful space. The solution was to position a sliding door to reduce the opening space, place the cooling unit on the ceiling and the equipment chiller on the floor below the room, positioning it at a distance of 10 metres. The chamber has a touch screen control (HMI) as well as a recorder in accordance with FDA regulation 21 CFR part 11.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers ENVIRONMENTAL TEST SOLUTIONS. 

TEMPERATURE CHAMBER FOR ELECTRICAL CABLE TESTING. MODEL: CETM-70/1800

One of the elements that can considerably affect an ELECTRICAL CABLE is the cold, affecting the mechanical characteristics of the cable. The different test standards (UNE, IEC, HD, BS, UL, CSA) establish the extreme test conditions to which cables must be subjected, allowing to verify the design and the choice of the most suitable materials for cable manufacturing.  

The temperature test chamber, CETM-70/1800, has been designed to carry out extreme tests up to -65 ºC, taking into account the mass introduced as well as the tool used to elongate or bend the electric cable during the test. Its vertical volume allows to comfortably place and manipulate the samples inside.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com.

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers TEMPERATURE TEST CHAMBERS. 

EXTERNAL CONDITIONING UNIT FOR ELECTRICAL ENGINE TESTING, MODEL: AFA-150/300g

The growing demand for electrical equipment has increased the need for ever more demanding climatic testing to ensure system reliability. The extreme conditions that these parts will face can range from cold winter to the highest desert temperatures.

The external conditioning unit, model AFA-150/300g, was designed to ensure the operation of the electrical machine in extreme positive temperature conditions. The external box was designed to be adapted to the customer's existing test bench in such a way that it could be adapted as much as possible without altering the configuration of the test bench. The test chamber has two replaceable doors so that both the generator and the test stand can be used as a normal system to increase its usefulness.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers EXTERNAL CONDITIONING UNITS FOR ENGINE TESTINGS.

LARGE VOLUME THERMAL SHOCK CHAMBER - 2500 LITRES, MODEL: CRT2H-40/2500

Thermal shock chambers are a fundamental element for the thermal fatigue testing of materials, equipment and automatisms. They are predominantly used in the following industries: aeronautics, automotive, military, electronics, telecommunications, space and, in general, in the materials research industry. The configuration of these chambers is usually vertical, but when the parts have a very large volume, it is necessary to opt for a horizontal design that allows the thermal shock to be carried out from right to left and vice versa.

The CRT2H-40/2500 thermal shock chamber was a great challenge for Dycometal, since few chambers with this volume have been manufactured, nor so demanding. The development of the chamber was carried out by our technical and design department with the customer, designing equipment in accordance with their requirements.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers LARGE VOLUME THERMAL SHOCK CHAMBER.

THERMOSTATIC BATH FOR COMBAT HELMETS TESTING, MODEL: BTE-1080.

All equipment carried by a country's armed forces is subjected to the most stringent environmental testing to ensure maximum safety and protection for the soldier. One of these elements are combat helmets, which must preserve their impact resistance after undergoing a temperature-controlled immersion test in salt water, simulating sea conditions and extreme temperature and ageing conditions.

In order to verify the immersion resistance of the combat helmets, DYCOMETAL has developed the special thermostatic bath BTE-1080e which allows a complete immersion up to 1 metre deep in salt water at a given temperature. The immersion/elevation system is fully automated so that the process is controlled at all times. Its construction has been developed in stainless steel to withstand the conditions of such a demanding test.  

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMOSTATIC WATER BATH FOR COMBAT HELMETS TESTING.

CLIMATIC TEST CHAMBER FOR TESTING POWER ELECTRONICS, MODEL: CCK-40/4357MT

The railway sector is one of the most important transport sectors on the planet for both people and goods, and is a sector with continuous investment in R&D&I with a view to improving the energy efficiency of the systems, increasing performance, reducing weights, etc. The components installed include power electronic equipment such as pulse sources, transducers, light indicators, etc. During the production process, compliance with the needs and requirements must be verified, applying the quality standards and regulations that must be applied. In order to verify correct operation in the most extreme environments, it will be necessary to carry out the necessary tests to guarantee the functionality of the equipment.

Our climatic test chamber CCK-40/4357MT allows testing of large and heavy power electronic equipment, subjecting them to the most extreme temperature conditions according to regulations, as well as performing high temperature and high humidity climatic tests according to customer specifications.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TESTING CHAMBER FOR POWER ELECTRONIC EQUIPMENT TESTS.

TEMPERATURE TEST CHAMBER FOR TESTING ON TRANSMITTING ANTENNAS, MODEL: CETM-40/979MT

Mobile telephony has become one of the essential elements of our daily lives, and it would be unthinkable for us not to have this technology at our disposal one day. This technology is based on the use of transmitting antennas, which have become part of our natural environment and which must be able to withstand the most aggressive environmental conditions: rain, solar radiation, extreme temperatures (desert or polar), etc. To this end, antenna manufacturers must have a laboratory prepared to simulate real environmental conditions, taking into account the energy dissipation that the antennas will generate during operation, thus guaranteeing correct operation 365 days a year.

The temperature test chamber CETM-40/979MT was designed to reach extreme operating temperatures, taking into account the energy dissipation of the transmitting antennas as well as its own mass. Its mobile design allows the chamber to be easily moved and its reduced volume makes it a space-saving chamber in the laboratory. A powerful chamber in a compact package.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL TESTING CHAMBER FOR TESTING MOBILE TELEPHONE ANTENNAS.