FREEZING TESTS IN THE AERONAUTICAL INDUSTRY. ACR-70/250 HORIZONTAL CHEST FREEZER (AMS 2750)

Our client, a leading company in the aeronautical manufacturing sector, required a horizontal freezer to subject samples to extreme cold. They needed a system that could condition elongated parts and reach ultra-low temperatures, taking into account the total mass to be placed inside.
 
The required specifications were:
👉 Temperature range down to -60°C.
👉 Compliance with AMS 2750 standards.
👉 High stability and uniformity.
👉 Horizontal configuration.
👉 Air-cooled condensation.
 
OUR SOLUTION: An industrial-grade horizontal chest freezer with a usable volume of 250 liters and dimensions of 500 x 1000 x 500 mm (Height x Width x Depth). It features simple control based on an electronic regulator with parameter monitoring and an independent data logger. All of this is compatible with the associated software via the Ethernet TCP/IP communication port.
 
Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

 
#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #freezing #Aeronautical #AMS2750 #temperature #freezer #testing #RAndD #Innovation #QualityAssurance

HOW TO TEST LARGE VERTICAL SAMPLES AT POSITIVE TEMPERATURES? AFA-100/1445 OVEN

Our client contacted us because they needed to test large vertical samples and required a forced-air oven to introduce them.
 

The requirements were:
👉 Custom-designed interior with a height of 1700 mm.
👉 Temperature range up to +100 °C
👉 Heating rate of 4 K/min.
👉 Robust structure to support up to 500 kg in less than 1 m².
👉 Ability to perform cooling/heating cycles.

OUR SOLUTION: Our AFA-100/1445 oven, a model designed by and for the client. With interior dimensions of 1700 x 1000 x 850 mm (H x W x D). Robust, with a large door and reinforced hinges to support its weight. The base is sturdy enough to support heavy loads and has leveling casters for easy movement. An air extraction system reduces the temperature inside the stove, and all of this is controlled by a controller with associated software for remote computer operation.

 

Would you like to more know?

📩 Contact: comercial@dycometal.com

🌐 Web: www.dycometal.com

 

#dycometal #environmentaltesting #EnvironmentalSimulation #HeatSimulation #ThermalTesting #temperature #oven #testing #RAndD #Innovation #QualityAssurance

HOW TO TEST ELECTRONIC LOCKS. CCK-45/80T CLIMATIC CHAMBER (CO2)

With the rise of online sales, the demand for lockers has increased significantly, and many of these are installed outdoors. Therefore, they must withstand the most extreme weather conditions, ensuring that the opening/closing mechanism functions correctly under the harshest conditions.
 
Our client, a manufacturer of mechanical and electronic locks, needed equipment to perform environmental testing on their products.

 

The required specifications were:
👉 Compliance with IEC 60068-2 standards for climate testing
👉 Temperature range between -40°C and +150°C
👉 Relative humidity control up to 98% RH
👉 Performance of high temperature and humidity tests.
👉 Small Volume
👉 Eco-friendly CO2-based unit.

 
OUR SOLUTION: One of our small-volume chambers, the CCK-45/80T, with an interior volume of 80 liters (500 x 400 x 400 mm, H x W x D). This chamber allows for the installation of several small locks or one larger lock. Its CO2-based system (R-744) allows for temperatures as low as -45ºC, meeting the customer's needs.

Would you like to more know?
📩 Contact: comercial@dycometal.com
🌐 Web: www.dycometal.com

 

#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #Lockers #Electronic #temperature #humidity #chamber #testing #CO2 #R744 #IEC60068-2 #climatic #RAndD #Innovation #QualityAssurance

CLIMATIC TESTING FOR ENVIRONMENTAL STUDIES IN THE AUTOMOTIVE INDUSTRY. CLIMATE CHAMBER CCK-48/2000T-2P-10 (CO2)

 Our client, a leading mechatronics company specializing in the automotive sector, was looking for several chambers for its new European production plant. This client sought a system tailored to its design and functionality needs, while maintaining environmentally friendly conditions regarding the construction of the refrigeration unit, which had to be based on CO2 (R-744).

The required specifications were:
👉 Temperature range between -40 ºC and +180 ºC
👉 Custom interior design for testing different types of samples.
👉 Excellent ergonomics for sample insertion.
👉 Heating and cooling speed greater than 4 K/min, considering a heat dissipation of 3 kW and a mass of 50 kg
👉 Environmentally friendly CO2-based unit.
 
OUR SOLUTION: The climatic test chamber with a design specially tailored to the client, our model CCK-48/2000T-2P-10. A chamber with a volume according to the client's needs: 1500 x 1900 x 700 mm (H x W x D), to comfortably accommodate the different samples to be tested. The double door and the shallow depth allow for easy handling of the samples, as well as the placement of the various sensors. These sensors must be registered in the controller itself. Advanced control and control software allow for monitoring all supplied systems.
 
Would you like to more know?
📩 Contact: comercial@dycometal

🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #Auomotive #mechatronics #temperature #humidity #chamber #testing #CO2 #R744 #climatic #RAndD #Innovation #QualityAssurance

IEC 60529 TESTING, RAIN TEST, IPX3 AND IPX4 DEGREES. CLL-1000 RAIN TEST CHAMBER

Sometimes our clients don't need a custom solution; a standard solution is sufficient for their environmental testing needs. That's where our standard solutions come in. This was the case for the electronics department of a European university that was looking for a rain test chamber.
 
The requirements were:
👉 Volume of approximately 1000 liters.
👉 Compliance with IEC 60529.
👉 IPX3 and IPX4 protection ratings.
👉 Flow control.
 
OUR SOLUTION: Our standard rain test chamber, model CLL-1000, with a 1000-liter capacity and an 800 mm diameter arch. It features a height-adjustable sample holder and a power supply for the sample. A standard solution for a standard need.
 
Would you like to more know?
📩 Contacto: comercial@dycometal.com
🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #RainTesting #electronic #chamber #IEC60529 #IPX #IPXY #testing #chamber #climatic #RAndD #Innovation #QualityAssurance

HOW TO SIMULATE HYGROTHERMAL BEHAVIOR IN COMPLEX BUILDING STRUCTURES AND CONNECTIONS?

CCKMB2-0-30/15000Te CLIMATIC CHAMBER
 
Our client, an Energy and Materials in Infrastructure and Buildings research group at a European University, was looking for an environmental testing system to study and analyze building components under different environmental conditions, simulating indoor/outdoor and winter/summer environments.
 
What did they need?
👉 Two climatic chambers with temperature and humidity control to simulate indoor and outdoor building conditions, with the option of being walkable to introduce sensors, equipment, etc.
👉 A large and robust sample holder to separate chambers with different types of insulation.
👉 Mobility to allow for the placement of large samples between the two chambers. 

👉 Temperature ranges from 0°C to +50°C for indoor conditions.
👉 Temperature ranges from -30°C to +70°C for outdoor conditions.
👉 Relative humidity control in both test chambers.
👉 Synchronized control in both systems, managed by a central system.
 
OUR SOLUTION: The CCKMB2-0-30/15000Te dual-chamber system. An environmental simulation system built with two climatic chambers, one for outdoor conditions and one for indoor conditions, and a mobile sample holder to easily and conveniently position the building component to be tested in the middle, aligning the three systems to prevent leaks at the joints and ensure maximum airtightness. The climatic chambers have a usable volume of 15 m³, allowing easy access for personnel, samples, etc. The control is based on a dual independent system for each chamber, to be able to perform independent temperature and humidity cycles, but all managed from a general PC that can centralize both systems and perform seasonal cycles.
 
Would you like to more know?
📩 Contacto: comercial@dycometal.com
🌐 Web: www.dycometal.com

#dycometal #environmentaltesting #EnvironmentalSimulation #ClimaticTesting #ThermalTesting #buildingmaterial #temperature #humidity #chamber #testing #chamber #climatic #RAndD #Innovation #QualityAssurance

CLIMATIC TEST CHAMBER FOR PACKAGING VALIDATION. CLIMATE CHAMBER CCKMB-40-5625T

Our client, a renowned independent laboratory specializing in the physical testing and validation of packaging for transport, needed to increase the number of units to expand its climate testing capacity.

The required specifications were:

👉 Medium-to-large chamber volume for all types of samples.

👉 Modular chamber that could be easily moved if needed.

👉 Temperature range down to -40ºC for ultra-freezing tests.

👉 Humidity control.

👉 High stability and uniformity.

OUR SOLUTION: Based on other models supplied to this client, we opted for two MODUBLOC climatic chambers, models CCK-40/5625T. These chambers have a 5.6 m³ internal volume capacity, a large access door, and a very vertical design to accommodate tall samples. The interior is made of stainless steel, and the exterior is mounted on a frame that allows for easy movement of the entire chamber unit if needed, while also providing a natural cooling zone. Temperature ranges from -40°C to +80°C, with gradients tailored to the client's requirements. All of this is controlled by an advanced touchscreen controller.

Would you like to more know? / ¿Te gustaría saber más?

📩 Contacto: comercial@dycometal.com

🌐 Web: www.dycometal.com

DID YOU KNOW THAT DYCOMETAL HAS BEEN MANUFACTURING BATTERY CHAMBERS FOR OVER 20 YEARS?

At DYCOMETAL, we have been designing and manufacturing specialized battery testing chambers for over two decades, back when many manufacturers were still not considering the real safety requirements of these types of applications.

Our experience has allowed us to develop systems with added safety features and solutions adapted to the risks associated with battery testing, especially in demanding sectors such as automotive, electric mobility, electronics, and energy storage.

OUR SOLUTION (2016): A CETM-70/1000, a 1000-liter thermal testing chamber. This reinforced unit is designed to test masses exceeding 250 kg, with a temperature gradient of 1°C/min between +120°C and -20°C, taking into account the mass and heat dissipation within the system. The system was built taking into account EUCAR risks, incorporating high safety standards such as an overpressure evacuation system, electromagnetic lock, gas meters, etc. All of this is designed to guarantee maximum safety and reliability.

Because when it comes to battery testing, experience and safety are not optional.

Would you like to more know?

📩 Contacto: comercial@dycometal.com

🌐 Web: www.dycometal.com

INTELLIGENT THERMAL CONTROL FOR HIGH-DENSITY RACKS. CLIMATIC CHAMBER CCK-0-6264m

In an increasingly digital world, the reliability of IT infrastructure is a critical factor to consider. As computing power increases, so does the energy dissipated by servers… and, with it, the heat generated in the racks. This thermal increase not only impacts performance but can also compromise the stability and lifespan of the infrastructure if not properly managed.
 
What is needed?:
👉 Modular chambers with wide door openings.
👉 Multiple access points.
👉 High capacity for compensating dissipated energy.
👉 Optimized airflow.
👉 Humidity control.
 
OUR SOLUTION: DYCOMETAL has been manufacturing controlled environment chambers for server conditioning since 2017, such as our CCK-0/6264m chamber, a modular chamber with high dissipation capacity and optimized airflow to remove generated heat and maintain the appropriate internal operating conditions for server racks. The chamber has a large door for accessing larger racks, as well as two auxiliary doors for convenient access to the servers from any side of the chamber. It features a reinforced and insulated floor, minimizing heat loss.
The client also requested relative humidity control to ensure controlled conditions across all possible variables.
All of this is controlled by an advanced microprocessor connected to its central control unit and an independent temperature recording system at various points in the rack, guaranteeing maximum stability and uniformity both temporally and spatially.

Would you like to more know? 

📩 Contacto: comercial@dycometal.com
🌐 Web: www.dycometal.com

CLIMATIC TESTING FOR CONSTRUCTION MATERIALS. CCK-30/1500T CLIMATIC CHAMBER

A major European university needed a chamber to conduct climatic tests on thermal and acoustic insulation materials, controlling temperature and humidity. This client already owned freeze-thaw (FTH) chambers from our company and entrusted us with the task of finding a suitable chamber for their needs.

The required specifications were:
👉 Medium-to-large chamber volume for all types of samples.
👉 Temperature range suitable for construction materials.
👉 Humidity control.
👉 High stability and uniformity.
 
OUR SOLUTION: The 1500-liter climatic test chamber, MODEL: CCK-30/1500T. This 1500-liter chamber, measuring 1000 x 1000 x 1500 mm (H x W x D), provided ample space for long test specimens. The chamber offered a temperature range from -30°C to +150°C and cooling gradients of 2.5 K/min and heating gradients of 4 K/min, enabling it to perform even some freeze-thaw tests. The CCK-T systems feature extended relative humidity control for conducting tests with more demanding humidity requirements. All of this was controlled via an advanced 7” touchscreen control system and our new totem with an operating status indicator light.

Would you like to more know?
📩 Contacto: comercial@dycometal.com
🌐 Web: www.dycometal.com

CLIMATIC TESTING ON SELF-ADHESIVE LABELS. 🏷🏷

MODEL CCK-20/48T
Climatic testing of self-adhesive labels is essential to ensure that the product does not peel, fade, or degrade prematurely. When writing a report or test plan, you should focus on how the face (fronting material), the adhesive, and the substrate (application surface) interact under environmental stress.
 
👉 Temperature Resistance
👉 Humidity and Condensation Resistance
👉 Post-Climate Mechanical Testing
 
Initial requirements for selecting the most suitable chamber could be:
• Small volume.
• Negative temperature ranges.
• Relative humidity control.
• Data logging system for reporting.
 
OUR SOLUTION: Our smallest climatic chamber, the DYCOMETAL CCK-20/48T, with a capacity of 48 liters. A compact benchtop chamber, both internally and externally, for easy installation in the laboratory, enabling the testing of small samples. With a temperature range from -20°C to +150°C and extended relative humidity control, it allows samples to be subjected to the ambient conditions of storage and transport. Advanced controls and software enable the recording of all test data for subsequent report generation.

📩 Contacto: comercial@dycometal.com

🌐 Web: www.dycometal.com

ENSURING AEROSPACE RELIABILITY

 In the aerospace industry, there is zero room for error. Critical components face radical thermal swings and humidity levels that can jeopardize structural and electronic integrity. But how is this quality verified before takeoff?

The Environmental Testing Challenge

Environmental simulation is key to predicting material behavior under extreme conditions. From ice formation to extreme runway heat, every sensor and structural part must be validated.

Key Standards Driving Innovation

Our solutions are designed to comply with the most demanding international standards in the sector:

✅ RTCA DO-160: Environmental conditions for airborne equipment.

✅ MIL-STD-810: Environmental engineering considerations.

✅ DIN, ISO, and OEM-specific requirements from major aerospace manufacturers.

Our Solution: CCK-T Series for Aerospace 🛠️

At DYCOMETAL, with over 40 years of expertise, we have evolved our CCK series to offer the CCK-T: high-precision climatic and thermal chambers:

🔹 Extreme Precision: Rigorous temperature and humidity control.

🔹 Versatility: Tailor-made solutions to meet any specific testing requirement.

🔹 In-House Calibration: Every unit is verified by our LCIS laboratory (ISO 17025 accredited) before delivery.

Ensuring safety in the air starts on the ground, by simulating the future of every component in our chambers

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK-T, CLIMATIC CHAMBERS FOR THE AERONAUTICAL INDUSTRY.

Raising the Standards of Reliability. 

In the aeronautical sector, precision is non-negotiable. The new CCK-T / CETM-T series of climatic and thermal test chambers from DYCOMETAL has been specifically designed to meet the demanding regulations of this market. 

Our chambers allow you to recreate the most extreme environmental conditions, from sudden temperature changes to critical humidity levels, guaranteeing the integrity of every component. 

A design adaptable to each client's technical specifications, with rigorous control and maximum stability. 

At DYCOMETAL, we don't just manufacture equipment, we develop solutions.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK-30/1000T, CLIMATIC CHAMBER FOR TESTING VIDEO SURVEILLANCE AND FIRE DETECTION SYSTEMS.

 Security systems must operate flawlessly under extreme conditions, ensuring that sensors respond accurately to temperature changes, withstand extreme weather conditions, and comply with all applicable regulations. Climate equipment allows for the simulation of extreme temperature and humidity conditions, guaranteeing the reliability, durability, and safety of devices in real-world operating situations. In a market where precision and rapid response are critical, climate testing is key to ensuring maximum performance.

Like our DYCOMETAL climate chamber, the CCK-30/1000T, a low GWP testing system with a cooling system compliant with F-Gas regulations, but capable of meeting the IEC standards established by the customer for electronic components. With a usable capacity of 1000 liters, it allows testing of both small electronic components and larger components

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

OPTIMIZING HUMIDITY RESISTANCE TESTING: MODEL CH-1000.

In the coatings and varnishes industry, precision in environmental simulation is essential to guarantee product durability. Today, we highlight our condensation test chamber, model CH-1000, specifically designed to comply with the UNE-EN ISO 6270-2:2006 standard.Key features of this unit:

✅ Capacity: 1,000-liter useful volume for large-scale testing.

✅ Versatility: Horizontal configuration, ideal for testing oversized parts or a high volume of smaller samples simultaneously.

✅ Certified Quality: All our equipment is factory-tested and can be certified by our own in-house calibration laboratory (LCIS), accredited under ISO 17025 standards.

With over 40 years of experience, DYCOMETAL continues to lead the way in manufacturing customized solutions for the most demanding test requirements.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK Series: Reimagining Environmental Testing for a Global Market.

 At DYCOMETAL, we understand that innovation has no borders. That's why our CCK Series is engineered for high-precision environmental simulations, ensuring the reliability of your products anywhere on Earth. From desert heat to polar cold, we help you exceed the most demanding standards.

💡 Ready to elevate your environmental stress testing? Discover why the CCK Series is the choice of industry leaders.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CH-1000 CONDENSATION CHAMBER FOR MOISTURE RESISTANCE TESTING OF VEHICLE BUMPERS.

During their service life, bumpers are exposed to rain, ambient humidity, condensation, and temperature changes, factors that can affect their materials, coatings, and finishes. The objective of water condensation testing is to simulate harsh environments and accelerate the effects that humidity and heat can have on materials and coatings, in order to evaluate: resistance to degradation, paint and coating performance, dimensional stability, durability, etc.

The DYCOMETAL CH-1000 condensation or humidistat testing chamber has a chest-type design, allowing access for large samples as well as smaller samples to perform tests on a greater number of samples. The system is easy to install and control, allowing for long-term testing according to standards.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK-40/648T-5, NEW CLIMATE CHAMBER SUPPLIED FOR TESTING INFO-ENTERTAINMENT DISPLAYS.

At Dycometal, we know that infotainment displays in trains, airplanes, and other modes of transport must offer flawless performance in any environmental condition. Our climate chambers allow for temperature, humidity, and combined cycle testing, simulating the real-world operating conditions these electronic systems face: sudden temperature changes, humid environments, or situations of high thermal stress. These tests guarantee the reliability, image stability, and durability of the displays, ensuring an optimal and safe user experience throughout the equipment's lifecycle.

Like our new climate chamber supplied for electronic components, the DYCOMETAL CCK-40/648T-5. A chamber with a temperature range of -40°C to +180°C, humidity control, and a 5°C/min temperature gradient across the entire range, for fast and reliable environmental testing. All of this is managed by our 7” screen-based control system and our brightly illuminated Totem display for the chamber's status

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK-40/21340mT, WALK-IN CLIMATE CHAMBER FOR CLIMATE TESTING IN THE PACKAGING SECTOR.

At Dycometal, we know that packaging not only protects, it also communicates quality. That's why climate testing is key to quality control in the sector: it allows us to simulate real-world temperature and humidity conditions to verify the resistance, stability, and durability of containers and packaging before they reach the market. Our climate chambers help detect deformations, loss of properties, or sealing failures, ensuring that every packaging solution meets the most demanding standards.

Like our DYCOMETAL CCK-40/21340mT, a large-volume chamber supplied to a technology center specializing in packaging testing. With an extended temperature range down to -40ºC for freezing equipment tests, it has the capacity to test a large number of samples of different sizes, as well as meet all the standardized temperature and humidity testing conditions for these types of samples. This customer has other DYCOMETAL cameras, relying on the quality provided by our brand.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.

CCK-10-16590mT, MODULAR CLIMATIC CHAMBER FOR STORAGE OF CONCRETE SAMPLES.

The durability of concrete begins with precise environmental control, achieved through climate testing for storing concrete specimens at 40°C and 50% relative humidity, with an accuracy of ±1°C and ±5% RH. These controlled conditions allow for accurate evaluation of the material's behavior, strength, and evolution, ensuring reliable and repeatable results for construction and civil engineering projects.

The DYCOMETAL climatic chamber, designed according to the client's specifications, enables these tests to be performed with maximum stability and uniformity. Its 16,590-liter volume allows for the storage of numerous samples, and the reinforced floor supports static loads exceeding 8,000 kg/m², providing the client with a robust surface for a large number of samples. The entire system is managed by our touchscreen-based control system with our status totem, as well as various additional safety systems.

For more information, please contact us by email: comercial@dycometal.com or on our website: www.dycometal.com . 

DYCOMETAL, a company with more than 40 years of experience in the development of simulation chambers for environmental testing, offers its customers ENVIRONMENTAL TESTING SOLUTIONS ADAPTED TO THEIR NEEDS.