3 IN 1, PHARMACEUTICAL STABILITY MODULAR CHAMBERS, MODELS: CM-0/6760m and 2x CM-0/11050m

The space to locate new equipment is one of the elements to be taken into account for a correct configuration of the climatic chambers. If the building is old, the existing space for the equipment is reduced, or if the building is new, it is necessary to correctly plan the position of each piece of equipment to be installed in order to optimise the space as much as possible. To this end, the technical-commercial department of DYCOMETAL analyses the best possible solutions in order to optimise the existing space to the maximum and to be able to offer the client the best solution with the greatest possible volume.

For the configuration of the 3 chambers, CM-0/6760m and 2x CM-0/11050m,for pharmaceutical stability, the best possible configuration was analysed in detail, building the 3 chambers in a single structure so that the space occupied by the equipment could be reduced as much as possible. The high ceiling allows the products to be tested to be stored more vertically, thus facilitating a greater storage capacity in the existing space and under different stability conditions.

If you want more information, you can contact us through our email: comercial@dycometal.com   or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR PHARMACEUTICAL STABILITY TESTING.

TEMPERATURE TEST CHAMBER FOR AMMUNITION FIELD TESTS. MODEL, CCK-70/125

Within the quality control of armament ammunition, there are various types of environmental tests: thermal, climatic, solar radiation, corrosion, etc., with thermal tests being one of the most common. During these tests, the parts are subjected to both positive and negative temperatures, and this test has to be carried out both in the laboratory and in real field tests, where the sample is tempered before being used under the indicated conditions. In order to temper the samples, it must be possible to take the chamber to the field.

The thermal test chamber model CETM-70/125 has been developed to maintain a good ergonomics, positioning the control in the upper part of the chamber and the cooling group in the lower part, as well as vibration absorption systems for the transport of the equipment in a comfortable way in a lorry. In addition, the chamber has a temperature range from -70ºC to +150ºC, which allows it to cover all the thermal tests required by customers. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL CHAMBER FOR AMMUNITION TESTING.

SPECIAL CLIMATIC TEST CHAMBER FOR PALEONTOLOGICAL TESTS. MODEL, CCK-25/2340MTe

Taphonomy is the part of palaeontology that studies the processes of fossilisation and the formation of fossil deposits. The aim of a test laboratory is to simulate the environmental conditions to which fossils will be subjected in nature, under controlled and repeatable conditions. This will require a very special chamber that encompasses all types of environmental tests possible in nature and anywhere in the world: temperature control, cryogenics, humidity, rain, carbonation and solar radiation.

The CCK-25/2340MTe chamber model was created with this premise in mind, the control of multiple variables existing in nature, within a medium volume and vertical chamber, in order to simulate the conditions to which the fossils will be subjected in real life. The equipment has several environmental simulation options that can be controlled both individually and as a whole, depending on the combination.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL, a company with more than 35 years of experience in the development of chambers for the simulation of environmental tests, offers its customers SPECIAL SYSTEMS DESIGNED IN ACCORDANCE WITH CUSTOMER SPECIFICATIONS.

CLIMATIC TEST CHAMBER FOR DRIVING MIRRORS, MODEL: CCK-40/588e

A vehicle’s driving mirrors can range in size from the smallest in a utility vehicle to the new larger mirrors in a van or truck. Moreover, their vertical geometry makes it difficult for them to fit into a vehicle position in a conventional climatic chamber. If we add to this the fact that laboratories have limited space for the chambers, then the design has to be well thought out.

The CCK-40/588e test chamber has been developed to meet all customer requirements: tight budget, limited space and a wide range of sample sizes. A model that meets the most stringent automotive standards and fits the space available for the chamber in the laboratory. 

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CUSTOM MADE CLIMATIC TEST CHAMBERS. 

EXTERNAL CONDITIONING SYSTEM FOR THE AERONAUTICAL SECTOR, MODEL: CCK-60/1000g

Within the aerospace industry there are a large number of parts of different sizes and with different performances, from the smallest microchip in on-board electronics to the curing of a composite, which often makes it difficult to choose a single unit that can cover all possible tests and sample sizes.

The CCK-60/1000g external conditioning unit or generator, was designed with the customer to cover a wide range of possibilities: from the testing of a small sample in a 1 m3 test box to the possibility of being connected to large curing rooms or test benches. Its cooling unit allows to condition even 9 m3 rooms, and it is designed to guarantee high temperature and high humidity tests, or dry environments. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the EXTERNAL CONDITIONING UNIT.  

FORCED AIR HEATING OVEN FOR FIELD TESTING OF AMMUNITION, MODEL: AFA-100/150e

Ammunition testing in the defence market is based on strict quality controls, subjecting the ammunition to extreme conditions of temperature, humidity or solar radiation both in the laboratory and in the field, where they have to demonstrate their resistance to the most extreme weather conditions. It is in the field, where real firing tests will be carried out after having been subjected to these extreme conditions.

The oven model AFA-100/150e has been specially designed to carry out both laboratory and field tests. The oven has been designed to be transported in a test truck, being able to condition the samples during transport and in the field by means of a generator set. Its horizontal design allows easy access to the samples in an ergonomic way and its reduced size allows the equipment to be placed in a small truck for easy transport.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the FORCED AIR HEATING OVEN FOR DEFENSE TESTING.

MODULAR CLIMATIC TEST CHAMBER (WALK-IN) FOR PHARMACEUTICAL STABILITY TESTS, MODEL: CCK-0/19200m

Within pharmaceutical stability testing, there are various combinations of temperature and humidity for the validation of pharmaceutical products. For this reason, the climatic chambers must be flexible in their construction and in setting the working instructions, so that when the client wants to change the temperature and humidity ranges, he can modify the parameters without any problem.

The CCK-0/19200m chamber was designed in collaboration with the customer to determine the different possible working ranges in which the customer could work. Its temperature and humidity ranges were extended to allow the customer to cover as many stability tests as possible in a single chamber. The interior volume was calculated to make maximum use of the existing usable space and to provide the largest storage capacity for the existing space at the customer's premises.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS FOR PHARMACEUTICAL STABILITY TESTING.

CLIMATIC TEST CHAMBER FOR GARDEN MACHINERY. MODEL: CCK-25/12085M.

The vast majority of the common elements that surround us are tested in climatic environments to verify the quality, durability and behaviour over time under the climatic conditions that they have to withstand throughout their useful life. One of these common elements are lawn mowers, which are tested under low and high temperature and humidity conditions to verify their resistance to atmospheric agents.

The climatic test chamber CCK-25/12085M has been designed to accommodate both small mowers and larger machines where one person can sit. Its large volume allows several machines to be tested in parallel or individually. The MODUBLOC configuration allows the movement of the chamber and easy installation.   

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS to perform such tests.

CLIMATIC TEST CHAMBER FOR DEFENSE SECTOR. MODEL: CCK-75/2000 2P NG.

Among the different sectors that use environmental testing equipment, one of the most demanding in terms of testing and safety is the Defense sector, where any component to be used in the field must be tested under the most extreme conditions of temperature and humidity.

The CCK-75/2000 2P NG climatic test chamber is prepared to house both large, heavy parts and numerous small samples to carry out the most demanding tests, both at low and high temperatures or under humid conditions. The CCK-75/2000 2P NG, being a standard design, has been prepared with added safety features, according to the requirements of this important sector. 

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBERS to perform such tests. 

AIR TO LIQUID THERMAL SHOCK CHAMBER ACC. WITH VW 8000 AND RENAULT 34-09-020, MODEL: CRT2V-166e

The standards VW 80000, Section K-13 "THERMAL SHOCK IMMERSION" and RENAULT 34-09-020 "AIR-LIQUID THERMAL SHOCKS", are specifically developed for electrical and electronic components, which are mounted below the wading level of the vehicle. Both standards serve to ensure the functionality in case of immediate cooling by temporary immersion of the component. The test shall consist of a homogeneous heating of the part, followed by immersion in salt water at a given concentration for a given time, with complete immersion of the specimen. After this cycle, it shall be analysed if the component has suffered any damage or if water has entered inside.

The CRT2VT-166e thermal shock chamber has not only been developed to meet all the requirements of the above test, but has also been designed to perform more stringent tests on the temperature of the immersion water and the salt water concentration, according to the customer's requirements.  Likewise, the chamber has been built in different parts, adapting to the space that the client had for it.

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the THERMAL SHOCK AIR TO LIQUID CHAMBERS to perform such tests.

TEMPERATURE TEST CHAMBER FOR HEAVY SAMPLES IN ELECTRONICS, MODEL: CETM-25/1296e

The electronic samples can be small microchips or large iron blocks, but the size does not matter, as they have to be tested in sub-zero and above-zero temperature conditions to verify their thermal resistance, whether they are small samples or large, heavy samples.

The design of the thermal test chamber CETM-25/1296e is based on the premise of being able to test large heavy specimens up to 750 kg. Its horizontal design allows the specimens to be loaded by means of a bridge crane, with a door large enough for the specimens to be placed safely. Its ergonomic design allows the chamber to be controlled from the side of the chamber, and the front wall pass-throughs allow access to the customer's own sampling probes to be positioned on the sample. 

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com.

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the TERMPERATURE TEST CHAMBER FOR HEAVY SAMPLES to perform such tests.

THERMAL SHOCK CHAMBER WITH SPECIAL DESIGN ADAPTED TO THE CUSTOMER'S SPACE, MODEL: CRT2V-70/165e

Sometimes, customers have limited space for the installation of standard equipment and modifications have to be made to the chambers in order to adapt them to the customer's existing space. At DYCOMETAL we are aware of these limitations, and our commercial policy is to make flexible chambers adapted to each customer's needs. Through our commercial and engineering department, we analyse the different possible solutions to modify our products and provide the best solution for our customers.

The thermal shock chamber  CRT2V-70/166e adapts perfectly to the space available for it. Designed with the cooling unit externally and positioned at a distance, reducing the need for space in the laboratory itself, but meeting the customer's needs in terms of recovery gradients. Likewise, the chamber is controlled by means of a retractable arm to reduce the space it occupies in the room to a minimum.

A solution adapted to the customer's space.

If you want more information, you can contact us through our email: comercial@dycometal.com or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CUSTOMIZED THERMAL SHOCK CHAMBERS to perform such tests.

EXTERNAL TEMPERATURE CONDITIONING UNIT FOR AUTOMOTIVE TESTING, MODEL: CETM-60/250g NG

Within the automotive sector, there are many vehicle parts with different sizes or that must be tested on dynamic test benches, which makes it difficult to test these parts in a standard climatic chamber. At DYCOMETAL we have been manufacturing external thermal or climatic conditioning systems (generator), in order to be able to test all types of components.

The CETM-60/250g NG thermal generator has been specifically configured under the customer's test conditions. Its heating and cooling performance is designed to meet the most stringent test conditions specified. In addition, its temperature stability and temperature uniformity recovery times were reduced to meet the customer's testing needs. Its mobile and adaptive design allows for the testing of small parts, large volume parts and dynamic test rigs.

If you want more information, you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the EXTERNAL ENVIRONMENTAL CONDITIONING UNITS (generators) for realize these tests.

FORCED AIR OVEN DESIGNED FOR TENSILE TESTS, MODEL: AFA-200/54e

New materials are the order of the day. Stronger, more environmentally friendly and affordable materials are the short-term future. These new materials must pass a series of tests in order to be characterised, one of these processes being tensile tests and their resistance to temperature.

The AFA-200/54e chamber has been specially configured for the working space of a given testing machine, taking into account the space between columns and the customer's interior dimensions. In addition, the AFA-200/54e has been equipped with different elements for visual studies using both visible and infrared spectrum cameras.

If you want more information, you can contact us through our email: comercial@dycometal.com       or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the FORCED AIR HEATING OVEN FOR TENSILE TESTS IN NEW MATERIALS.

CLIMATIC CHAMBER FOR THERMAL INSULATION TESTS, MODEL: CCK-25/6800

 The European guide EAD-040287-00-0404, establishes the bases for the construction and testing of thermal insulation systems, indicating a series of tests to verify their reliability, among which are the hygrothermal behavior tests, which must be carried out in a climatic chamber.

The CCK-25/6800 climatic chamber model has been designed and built in a robust way to guarantee maximum durability over time against these heating/rain and heating/cooling cycles. The CCK-25/6800 will allow one or two ETICs to be tested in parallel.

If you want more information you can contact us through our email: comercial@dycometal.com  or on our website: www.dycometal.com .

DYCOMETAL company with more than 35 years of experience in the development of chambers for simulation of environmental tests, offers its customers the CLIMATIC TEST CHAMBER FOR BUILDING WALLS TESTING.